FIRST RIDE! 70cc ZUMA Vertical Minarelli Build!

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 85

  • @jered2177
    @jered2177 Рік тому +11

    Just bought a genuine roughhouse 50,more comfortable than my bugeye. Time to do a mild street build for it

  • @Maltechr
    @Maltechr Рік тому +1

    Cool cool.. I had a Booster way back with Aeros engine, rims and fork.. Full Malossi MHR build and a team speed pipe.. Good stuff!

  • @aaronwetzel1981
    @aaronwetzel1981 Рік тому +3

    Nice of you to help your buddy build his scooter 👍

  • @carlosvazquez8962
    @carlosvazquez8962 Рік тому +4

    Glad u did that scooter justice 🤙

  • @A1UTV
    @A1UTV Рік тому +1

    Not sure if ya have ever tried but Home Depot sells some cheap pipe cutters that work awesome for the bar ends leaves a nice end and keeps the cuts nice and straight and wont get hot. 👍

  • @Ottins_28
    @Ottins_28 Рік тому +9

    Polini cylindres are good , but if you have a built like that , I would suggest stage 6 streetrace or stage 6 mk 2 / mk 2 sport pro , those are INSANE , keep up the good work ❤❤😍😍

    • @sirkenny1
      @sirkenny1 Рік тому +1

      mk2 is sick, yessss :)

    • @jamiejablonski5339
      @jamiejablonski5339 Рік тому +2

      Totally agree, I never rated stage 6 cylinders, always ran the Malossi Polini variants. But I have to give it to them, the sport pro with a race crank, c16, just a decent 21mm carb/reed valve and set that squish to around 0.6 you will be fuckin flying.
      I’ve done the Mhr stuff and for overall bang for buck, reliability and consistent power the sport pro is a loooooong way in front

    • @sirkenny1
      @sirkenny1 Рік тому

      @@jamiejablonski5339 That's right, I'm right there with you, and the setup also sounds really neat.
      I find simply plugged from a plug and play cylinder 17 hp to get is already mentally ill ^^ ...
      I like to watch your videos, keep up the good work :)

    • @elonradberg6088
      @elonradberg6088 Рік тому +1

      or polini evo 3

    • @skulastic66
      @skulastic66 Рік тому +1

      mk2 racing is better

  • @andyanders58
    @andyanders58 Рік тому +3

    Good job .. now stay real clear of Joe while he is Trying to pop it up. Good job. Trev..old man mop

  • @nikkari3257
    @nikkari3257 Рік тому +1

    You should try mvt digital direct ingnition on those scooter they make a diffrense

  • @marissashirley9333
    @marissashirley9333 Рік тому +5

    Appreciate the content, stay awesome 🤙

  • @Shefw_Tom
    @Shefw_Tom Рік тому

    i have a GY6 4 stroke and i want to tune it, everything is stock except the 70cc cylinder, i want to add a MotoForce Racing CVT Kit, but idk maybe i need a better carb with intake and exhaust aftermarket

  • @garagethings1
    @garagethings1 Рік тому +2

    this is gold glad he got a good laugh

  • @retrosmoke
    @retrosmoke Рік тому

    Sick! I’m about to a full engine build on my Jog, needed some minarelli inspo!

  • @robertsfridrihsons
    @robertsfridrihsons Рік тому +2

    What do you think is wrong with my aprilia sr50 2gen. When im giving it full gas it amidiatly hits the rev limiter and keep the fire content coming i really love it

    • @BloodBath707
      @BloodBath707 Рік тому +1

      Have you tried heavier rollers? Light rollers will rev up quickly.

    • @robertsfridrihsons
      @robertsfridrihsons Рік тому +1

      @@BloodBath707 no i haven't thanks for the tip

  • @maximsthug6290
    @maximsthug6290 Рік тому

    6:40 so good engin sound

  • @Jackintheshed
    @Jackintheshed Рік тому

    Hello Trevor, Do you run an air filter on that carb and what jetting do you normally set them to? Cheers j p

  • @cav3man360
    @cav3man360 Рік тому +2

    Another dope video keep it up

  • @terrancedaves7514
    @terrancedaves7514 Рік тому +1

    What bike do you recommend for speed cruises with friends pre-bug 50 or bugeye 50 for the aftermarket parts this will be my first build?

  • @ksboi29
    @ksboi29 11 місяців тому

    No idea how I found these videos but glad I did.

  • @49684
    @49684 Рік тому

    Thanks for the cvt cover/silencer tip. 😊👊

  • @shanedavis9728
    @shanedavis9728 Рік тому +1

    Lessss goooo 💪🏻!!!!!

  • @TheJimmysGarage
    @TheJimmysGarage Місяць тому

    Is that a replay or TNT side stand?

  • @zakrowe3
    @zakrowe3 Рік тому

    any idea how to derestrict a 2011 peugeot v click? love the vids

  • @xXx-ROBLOXGAWD-xXx
    @xXx-ROBLOXGAWD-xXx Рік тому

    id love to know what the seat height is on your wheelie builds cos my scooter feels so high up, i know that makes wheelies easier to have the ass end high but its stock height and i can barely get my foot on the rack and in 6 foot

  • @ComplxRetro
    @ComplxRetro Рік тому

    What adaptor did you use to keep the aluminum elbow to run with the cp21?

  • @the_postin
    @the_postin Рік тому

    will you ever do a build getting the best performance out of a 50cc cylinder? maybe on a horizontal minarelli engine?

  • @oscarturpyn719
    @oscarturpyn719 Рік тому +1

    🔥🔥🔥banger

  • @itsroads206
    @itsroads206 6 місяців тому

    How do you cut the case?

  • @nune223
    @nune223 Місяць тому

    If i may suggest a 70cc build😊
    Try a
    Malossi MHR or Polini Corsa Cillinder
    Polini 28mm PWK carb
    Gillera Runner Belt
    Malossi Delta Clutch
    Polini or Yasuni Variator
    With a Sito Plus or a Yasuni C16 exhaust
    Malossi VL13/16 Reed Valve
    Gears to your liking
    Fast Throttle
    Stage 6 Powerfilter
    Malossi Clutch Bell.
    Black Push & Pull Springs😁
    With some proper adjusting you have a wild wheelie machine😁😁

  • @GordoHernandez
    @GordoHernandez Рік тому

    I have a 02 zuma bug eye I believe it’s a horizontal engine do I need to swap out for a vertical engine ? I’m new to the scooter life lol

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      horizontal is a more powerful engine tons of aftermarket

  • @itsroads206
    @itsroads206 Рік тому

    Wished I had a homie like you in the Seattle area. 😢😢 I could have been at Ferry2Ferry today. I’m going to need help once I get the BBK.

  • @ls_hoopdee
    @ls_hoopdee Рік тому

    Which yasuni is that?

  • @ayyvee5757
    @ayyvee5757 Рік тому

    Tuff build boyz!! Is a stock good working oil pump ok to use for a mild 70 zuma build instead of premixing ?

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      i never trust stock oil pumps on these old bikes!

    • @ayyvee5757
      @ayyvee5757 Рік тому

      But if one would trust a oil pump is it enough oil for a 70 ? Good oil of course

  • @ИгорьХрапков-ш9ц

    I would have welded HDT to the vertical for a long time

  • @Antejog
    @Antejog Рік тому

    how did it not blow when he did full throttle cause the cylinder is cast iron right?

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      why would it blow

    • @Antejog
      @Antejog Рік тому

      @@MOPBOYZ cast iron should be drove in or how u say it? Max 3/4 throttle the first 500kms

  • @YourGoddamRight
    @YourGoddamRight 20 днів тому

    Never seen someone put there feet down while moving to do a wheel that's crazy instinct there.

  • @xXx-ROBLOXGAWD-xXx
    @xXx-ROBLOXGAWD-xXx Рік тому

    also huge luck to homie, hope he can get those wheelies down b4 🧚2🧚

  • @Niels-booij
    @Niels-booij Рік тому

    When puch update?

  • @notmitz967
    @notmitz967 Рік тому

    when is the maxi done

  • @LakituGaming
    @LakituGaming Рік тому

    I need that mula what song is that popsnokw

  • @bugactivities
    @bugactivities Рік тому

    zuma progress is lookin spicy, you boys coming up for ferry 2 ferry this year? edit just saw the ending see you boys up there

  • @giusepperotondella7034
    @giusepperotondella7034 Рік тому

    would you give me a kit for my 2005 zip 4t😊

  • @savior9652
    @savior9652 Рік тому +1

    Hi, look at my yamaha mbk booster.
    I would trade it for a yamaha slider 😀

  • @Cabral7o2
    @Cabral7o2 Рік тому +2

    Josni scared zuma bouta kick his ass lmfaoooo

  • @simonbendixen352
    @simonbendixen352 Рік тому

    What type of yasuni exhaust?

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      yasuni r

    • @simonbendixen352
      @simonbendixen352 Рік тому

      @@MOPBOYZisnet it a small exhaust for polini Corsa 70cc some of my Freinds are rocking c10/16 yasuni?

    • @marcusfinne1063
      @marcusfinne1063 Рік тому +1

      @@simonbendixen352 small pipe more torque and big pipe more top speed

  • @BoozySZN
    @BoozySZN Рік тому

    we've all got that one friend that comes over and makes a mess of everything, uses all your tools and makes a shit job of everything xD

  • @pk93cov
    @pk93cov Рік тому

    Yessirski

  • @Philipnil06
    @Philipnil06 Рік тому

    You should build a minarelli horisontal sometimes

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      i’ve built a few on the channel. most recently the f12 , my last video before this lol

  • @Dinandoe
    @Dinandoe Рік тому

    stage 6 mk2 and a yasuni c 21

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      c 21 is too top end of a pipe for a wheelie bike, i run c21 on my f12 and not a fan at all for it to be on a prebug wheelie build!

    • @Dinandoe
      @Dinandoe Рік тому

      @@MOPBOYZ you can do a dr 70cc cilinder with a sito plus pipe

    • @Dinandoe
      @Dinandoe Рік тому

      @@MOPBOYZ and youre vids are dope

  • @dezow5674
    @dezow5674 Рік тому

    Where are the key chains

  • @skulastic66
    @skulastic66 Рік тому

    in finland we call that "Laiska"

  • @mariusblp
    @mariusblp Рік тому

    Just asking but can you find and buy a new scooter, thats not a zuma, maybe some euro scooters?

  • @sirkenny1
    @sirkenny1 Рік тому

    nice Goodies :)

  • @B0r3dsBikes
    @B0r3dsBikes Рік тому +1

    I miss the old intro 😢

  • @GorrillaFastTv
    @GorrillaFastTv Рік тому

    Get dude a helmet 😂 before learning any wheelies , gotta be safe 🔥

  • @maximsthug6290
    @maximsthug6290 Рік тому +1

    Like your content
    Long away watching you never win stickers

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      haven’t done a sticker giveaway in awhile but there always for sale on www.mopboyz.com

  • @olv1921
    @olv1921 Рік тому

    The correct name is Yamaha booster

    • @MOPBOYZ
      @MOPBOYZ  Рік тому

      no, in america it’s a zuma. they have slight differences on frame and plastics as well

    • @aussiemarinefish
      @aussiemarinefish 8 місяців тому

      In Australia its called Bws50

  • @garagethings1
    @garagethings1 Рік тому

    needs decals

  • @theSicariuselitealphaJOKES
    @theSicariuselitealphaJOKES Рік тому +1

    Fucking A Congregation Too U All. And How Much Is Y'all plastic panels And Ur Seat.