How to Replace Torsion Key 98-12 Ford Ranger
Вставка
- Опубліковано 28 вер 2024
- 1A Auto shows you how to repair, install, fix, change or replace your worn out or bad torsion bar key. This video is applicable 01 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oabH/1A...
• Pry Bar 1aau.to/ogJ/1AX...
• 13mm Socket 1aau.to/oYa/1AX...
• 19mm Socket 1aau.to/op9/1AX...
• 2 Jaw Gear Puller
• 1/2 Inch Breaker Bar 1aau.to/ojK/1AX...
• Ratchet 1aau.to/oadi/1A...
• Socket Extensions 1aau.to/oYa/1AX...
• Gloves 1aau.to/odt/1AX...
• Rust Penetrant
• Safety Glasses 1aau.to/oad/1AX...
• Floor Jack 1aau.to/orY/1AX...
• Hammer 1aau.to/ojX/1AX...
• Jack Stands 1aau.to/osc/1AX...
For More Info visit us at 1aau.to/h/a49/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Hi, Does the torsion key have a fixed position in the hexagon? could i run a point to give it more height?
Thanks
why take tire off?
Did I miss you reinstalling that block isolator?
you wont get a aftermarket key installed with that wimpy puller mine exploded i had to notch the crossmember and buy the big u bolt puller
Is there a way to buy a new adjustment keeper? The adjustment bolt snapped off in the adjuster, where can I get another one?
What weight is the 2 jaw puller? 2 Ton? Ty
Can you recommend the exact size/make of the two jaw puller?!?!
6" or 8" works
@@V8SKULLS okay thank you does the tons of pressure matter
What do you mean put the key at the other end of the bar
Grind a slit or two into your torsion key if you have new ones (typically right though) and the key should come off like a breeze no matter how seized
+Brandon Macinnis Thanks for the tip! We'll pass this info along to our production team.
2 jaw puller slides. Doesn't work
No replies on the puller but I’m guessing 6”
What size is the size of that 2 jaw puller?
6" or 8" is good
Is it possible to do this without a two jaw puller?
Lotus naw bruh it ain’t cuz it pushes the key up, works like a spring I guess
You could also use a c clamp
The technician mentions using safety equipment at 3:44 and 6:03, but is not himself seen wearing any such equipment througout the video. 🤦
I’m soo glad I have a2wr
I think all I need is to remove the tension so I can get the knuckle off the ball joints for replacement.
Great video what waz the pad that's underneath the torsion key mine has rotted out
2wd
What size is the puller?
+TheKing0fHalo This is a 2 Jaw Gear Puller. Thanks for watching.
Not the best video I've seen for this job.
+Eng3Capt Thanks for the feedback!
does it make it easier to re- tension the key with the wheels dangling or jacked up by the axle?
+Brandon Miranda We wouldn't be able to say here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@@1AAuto well that wasn’t any help for him 😂
@@thebeastman7222 honeslty look at their responses seems like they don't know anything I bet they don't even know how to put gas in a car.
\