Hello, I am sorting out my build path/plans for a 3uz/cd009 in a ls430. Stock ecu tuned for 75 wet shot by quantum auto. AEM wideband. Looking at PSC1 for 83mm maf housing correction over stock 73mm as well as using the modifier for fuel enrichment on nitrous. If I could run a dry 75 shot and use the maf enrichment map to match my nitrous window settings I could eliminate the wet side and rely on the modifier instead. Is this feasible? Thank you!
The PSC1 is well suited for adjusting for the larger MAF. The modifier can make minor changes, but can't add enough fuel to match your dry shot. We could provided the fuel through an additional injector controlled by an AIC1 or AIC2.
Have you guys authorized anyone to resell your products? I just bought a MAF calibrator from another company. Turns out they’ve rebadged your module. However, the R4 software is a dead-linked zip file download. I’m feeling frustrated here.
2-cylinder, 2-stroke is a must for upstream injection. With port injection, you can run 4-cylinder, 4-stroke. The controller will inject fuel once per crank revolution.
@@markamarandos3408 I will have to change it to 2 stroke 2 cylinder I have it on 4 stroke 4 cylinder but it's not shooting fuel at the desired rpm that we have in the tune and this is a whole new ecu because we thought our last one took a crap on us
If we have a map already flashed to the Split Second Controller and the Tuner wants us to reflash a new Map to it are we required to delete the old map or do we just flash the new map to it.
I buy one already from graveyard i need to install all cables and buy freektune tune my tuner take care all????? Or i need to download R4 software to install my split controller
If you purchased one of our modules that uses R4 directly from Split Second or a dealer, the R4 software is included. Give me your email and I will send a link for download.
Great job. I'm trying to set up a map blind and this is a huge help
Windows was unable to install your usb - serial - controller ? What do I do
Hello, I am sorting out my build path/plans for a 3uz/cd009 in a ls430. Stock ecu tuned for 75 wet shot by quantum auto. AEM wideband. Looking at PSC1 for 83mm maf housing correction over stock 73mm as well as using the modifier for fuel enrichment on nitrous. If I could run a dry 75 shot and use the maf enrichment map to match my nitrous window settings I could eliminate the wet side and rely on the modifier instead. Is this feasible? Thank you!
The PSC1 is well suited for adjusting for the larger MAF. The modifier can make minor changes, but can't add enough fuel to match your dry shot. We could provided the fuel through an additional injector controlled by an AIC1 or AIC2.
Have you guys authorized anyone to resell your products? I just bought a MAF calibrator from another company. Turns out they’ve rebadged your module. However, the R4 software is a dead-linked zip file download.
I’m feeling frustrated here.
I can help you with the R4 software. Please contact me directly at mark@splitsec.com so we can resolve this.
So for a 2.0 focus st motor do I need to set it to 2 cylinder 2 stroke? I'm running the Radium fuel rail with 1050 injectors
2-cylinder, 2-stroke is a must for upstream injection. With port injection, you can run 4-cylinder, 4-stroke. The controller will inject fuel once per crank revolution.
@@markamarandos3408 I will have to change it to 2 stroke 2 cylinder I have it on 4 stroke 4 cylinder but it's not shooting fuel at the desired rpm that we have in the tune and this is a whole new ecu because we thought our last one took a crap on us
If we have a map already flashed to the Split Second Controller and the Tuner wants us to reflash a new Map to it are we required to delete the old map or do we just flash the new map to it.
You don't need to delete the old map. Simply open the new file, connect and do the Write Data to ECU operation.
@@Splitsec Thanks for the quick reply Much appreciated. Just wanted to make sure.
I buy one already from graveyard i need to install all cables and buy freektune tune my tuner take care all????? Or i need to download R4 software to install my split controller
If you purchased one of our modules that uses R4 directly from Split Second or a dealer, the R4 software is included. Give me your email and I will send a link for download.
@@Splitsec i buy one come with CD software
@@Splitsec i buy one for mazdaspeed 3 2013
@@josuearroyo370 It sounds like you already have the R4 software. You will need to use it to write your calibration file to your module.
@@Splitsec i dont know do that my first time you think my tuner can do that for me only i have to conect the cables????my tuner is freektune
Would love to buy your product but it is way to confusing.
Feel free to contact us at sales@splitsec.com or at 949-863-1359 with any questions you have.