How To Tune A Turbo Engine | Turbocharged Engine Tuning 101 [GOLD WEBINAR LESSON]

Поділитися
Вставка
  • Опубліковано 16 гру 2024

КОМЕНТАРІ • 154

  • @hpa101
    @hpa101  6 місяців тому +3

    Building a fast car? Get $400 OFF the VIP package and never pay for another course, EVER: hpcdmy.co/vipy27
    Kickstart your EFI Tuning knowledge. Get 50% OFF the EFI Fundamentals course: hpcdmy.co/offery27

  • @jacobturner3648
    @jacobturner3648 3 роки тому +33

    I cant tell you how much i appreciate what you guys do for the community. I have learned so much through you.

    • @hpa101
      @hpa101  3 роки тому +6

      Our pleasure!

    • @paulmickle1135
      @paulmickle1135 Місяць тому

      Literally taught me ground up lol

  • @mappek6586
    @mappek6586 4 роки тому +22

    A lot of useful informations, that's exactly what I've been searching for for a long time. Thank you

  • @25aspooner
    @25aspooner 4 роки тому +23

    Love ALL of the videos that y’all have been putting out! Hopefully I can visit y’all down under someday!

    • @hpa101
      @hpa101  4 роки тому +7

      We'll get the beer in the fridge and kettle on the boil to cover all the bases in the meantime 😂 HPA Members are always welcome to drop in if they're in Queenstown, just fire us an email when you're in the area in the future 🤘- Taz.

  • @hansjochen6257
    @hansjochen6257 4 роки тому +37

    Thanks for sharing all these awesome technical informations during these hard times.thanks

    • @hpa101
      @hpa101  4 роки тому +5

      Our pleasure Hans, hope they're helping keep you occupied =) - Taz.

    • @jaredpinner971
      @jaredpinner971 Рік тому

      W w

  • @bluecollarracin524
    @bluecollarracin524 3 роки тому +8

    I've been learning to tune myself to avoid the SOS calls to the tuner when we are away. Timing and fuel have been my kryptonite I'm learning a lot through research and watching these type of videos. Would love to get some real knowledge on how to.

    • @hpa101
      @hpa101  3 роки тому +4

      Good man! Keep at it, it all adds up. This course here is one I would highly recommend for you: hpcdmy.co/efifyc
      I know the word 'fundamentals' isn't exactly sexy, however, so much is covered in here and with lifetime access you will always have it on tap :)
      Here's a coupon too: UA-cam25 - Taz.

    • @BrodeyDoverosx
      @BrodeyDoverosx 7 місяців тому

      Just be aware that a lot of the AFR targets are theoretical. Different engines/setups will require different fuel targets.
      You know you’ll have it right when the engine has good response (throttle response) and no spark knock. Every engine and setup…and heck …. Every fuel type will be very different.
      Your goal is to figure out a process and a ball park to get started.

  • @mikefoster4105
    @mikefoster4105 4 роки тому +6

    Thanks for this video been going back and forth with buying tuning classes or not, I've already got a year of tuning under my belt but now I think I will spend the money with you guys!!!.. thanks!!!!....

    • @hpa101
      @hpa101  4 роки тому +2

      Awesome thanks Mike!

  • @beauhawkins5878
    @beauhawkins5878 4 роки тому +9

    Love your work! as soon as i can afford it I'm signing up for the webinars :D you put so much detail and help out anyone interested. your knowledge is gold to me. thank you Peace

  • @QXZ9027MKII
    @QXZ9027MKII 2 роки тому +1

    Top notch Sir, Much obliged for the insight, scintillating indeed.

  • @mechanicmechanic1428
    @mechanicmechanic1428 Рік тому +1

    very clear and useful information

    • @hpa101
      @hpa101  Рік тому

      Glad it was helpful!

  • @doug774
    @doug774 2 роки тому +1

    Love these in depth series

  • @rebwar08
    @rebwar08 9 місяців тому

    Perfectly explained instructional video very very good sir it cant get aby bettrr than this

  • @turbospoon_audi_s3
    @turbospoon_audi_s3 4 роки тому +5

    Great teaching!! I really like your way to explain the application process!
    Kind regards from germany 👍🏻

    • @hpa101
      @hpa101  4 роки тому +1

      Danke! - Taz.

  • @dave-gg8819
    @dave-gg8819 2 роки тому +1

    Thank for your technical information..✊️

    • @hpa101
      @hpa101  2 роки тому

      Cheers for watching and commenting Dave! Glad you enjoyed this one - Taz.

  • @CarModsGarage
    @CarModsGarage 6 місяців тому

    Nice video Andre. I bought the course years ago and it helped me a lot. I'm currently running my Supra 2JZ VVTI turbo. You helping me a ton!

    • @hpa101
      @hpa101  6 місяців тому

      Awesome to hear man and glad to be a small part of your tuning journey 😎
      Don't forget you have lifetime access to the course so it's still there whenever you want to reference it too - Taz.

  • @nigelmcclure6440
    @nigelmcclure6440 2 роки тому +1

    Thanks again for the info

  • @admstudios7
    @admstudios7 2 роки тому

    Waoooo what a great intel on this video , i love it , very detailing and easy explanatory and understandable , keep up the good work

  • @alackofspeed
    @alackofspeed 4 роки тому +3

    Good video - informative and well delivered. Thanks.

    • @hpa101
      @hpa101  4 роки тому

      Glad you enjoyed it mate, hope you're keeping well :) - Taz.

  • @rogermaddox9902
    @rogermaddox9902 3 роки тому +1

    Awesome tips and helpful information and confidence on all of it. Just keep on hearing wet macaroni sounds. Hehe Awesome 👌😎😄👏

  • @mikejovi980
    @mikejovi980 2 роки тому +1

    Am getting high iat on rb25 with a pretty small intercooler like 100% bigger than factory.. Causing knock on pump on a engine of 8.5:1 or less compression.. still making 320rwkw at about 18psi on a gt3076r and 385rwkw on ethanol at a measly 24psi so what you've said makes sense for the most part.. better intake charge temps mean more power. Although to be fair I'm not willing to spend money on intake manifolds throttle bodys or exhaust manifolds so it's running all oe components.. on the plus side I'll see 20+psi by the time a factory turbo sees 7psi

  • @chancewindham1718
    @chancewindham1718 Рік тому

    Your content Is so good dude. 👍 Thanks for taking the time and sharing.

    • @hpa101
      @hpa101  Рік тому

      Glad you enjoy it 😎

  • @thegerman7133
    @thegerman7133 2 роки тому

    Great explanation!

  • @dsmcraig
    @dsmcraig 4 роки тому +1

    Awesome lesson in tuning thanks

  • @Patr34
    @Patr34 4 місяці тому +1

    Thank you sir

  • @crx750
    @crx750 3 роки тому

    intersted video thanks for all that detail and info lesson

  • @TomBudin
    @TomBudin 4 роки тому +1

    very informative HPA!!! thank you

    • @hpa101
      @hpa101  4 роки тому +1

      Glad it was helpful Tom 😎 Cheers - Taz.

  • @mr.m6691
    @mr.m6691 3 роки тому +3

    How do you manage to keep it at 2500rpm full throttle (34:44)? Thank you for all the good videos and info.

    • @subyoooyoy
      @subyoooyoy 3 роки тому

      Did you ever figure it out?

    • @mr.m6691
      @mr.m6691 3 роки тому

      @@subyoooyoy no. 😔

    • @subyoooyoy
      @subyoooyoy 3 роки тому +2

      @@mr.m6691 I think the Dyno is increasing the load/resistance, as he increases throttle.

    • @TheRedspinx
      @TheRedspinx 2 роки тому +1

      It's the particular Dyno, hub dynos allow you to lock the rpm and check throttle position.

    • @hpa101
      @hpa101  2 роки тому +2

      Sorry I missed your question, if you search the word dyno on the channel there are a few videos that explain this and other elements of dyno options and operation.
      This is a load bearing dyno, and that is the feature of this type. You can hold a set load, being RPM here. You can have a hub, chassis or engine dyno that is load bearing.
      And alternative is an inertia dyno which doesn't hold rpms like this making them only good for sweeping runs. They are an older and cheaper style really, but still quicker and a little more accurate than just road tuning - Taz.

  • @AIRCOOLEDLIFE
    @AIRCOOLEDLIFE 3 роки тому

    You are a GOD send🙏🏾🙏🏾🙏🏾. I just want to learn to turn my own car. Thanks for all you do. NEW SUBSCRIBER 👍🏽

  • @LeviHeizer
    @LeviHeizer 4 роки тому +1

    My car has the issue that you mentioned with an undersized internal wastegate. Not easy to tune around, but it's fun! 🤣

  • @TheCarpenterUnion
    @TheCarpenterUnion Рік тому +1

    Just had 2 tuners freak out that my AFRs were so lean... They were richer than yours at 10PSI and now they have me running in the 0.68lamda region by 14PSI. Knew something was off with what they were saying...10AFR is ridiculous, right?

  • @PANTYEATR1
    @PANTYEATR1 4 роки тому +2

    awesome video as customary HPA...hopefully in the future we can see how dual VE fuel mapping works and if it gives us double the fuel mapping resolution? dual ignition maps, and for us without a dyno, is it ok to datalog smooth, modulated pulls in each gear to redline, tuning each cell that each gear is reaching? i have more questions, but I'll save them for later. thanks HPA friends💪

  • @PANTYEATR1
    @PANTYEATR1 3 роки тому +2

    such a good video, that i had to watch it again! i have a question on where the "coasting" area would be? I'm sure it could be in the high vacuum area, but I've coasted in the "cruising" areas before. any tips for running those situations? thanks and great job HPA💪

    • @hpa101
      @hpa101  3 роки тому +3

      I define coasting as being when you're completely off throttle. There's a bit of semantics involved though and you could also call an area where you're cruising and slowing down 'coasting' and wouldn't be necessarily wrong. If you're completely off throttle though then you can disable injection which helps save fuel and reduce emissions. On the other hand if you still require some amount of engine power and you're still lightly on the throttle then you'd want to target your normal cruis AFR - Andre

    • @PANTYEATR1
      @PANTYEATR1 3 роки тому

      @@hpa101 yes Andre, i agree with you. you da man!💪

  • @Fayis1341
    @Fayis1341 10 місяців тому +1

    28:50 you said 100% pressure but in table it’s 0. What you mean by that ? What is the negative value of map sensor ?

    • @paulmickle1135
      @paulmickle1135 Місяць тому

      100kpa is 0 positive pressure just 14.5 psi of atmospheric

    • @paulmickle1135
      @paulmickle1135 Місяць тому

      For example if your map sensor is inside your manifold behind your throttle plate your sensor could read 50kpa or a vacuum compared to outside

    • @paulmickle1135
      @paulmickle1135 Місяць тому

      It’s a scale where 0 is a vacuum instead of 0 psi

  • @KJarbo
    @KJarbo 5 місяців тому

    40:35 ”start rich and retarded” felt that in my soul and it perfectly describes my automotive journey 😂

  • @Troy.K
    @Troy.K 3 роки тому

    Graphical illustrations would really help one stay fixed to the lessons even more

  • @richardtickler8555
    @richardtickler8555 3 роки тому +3

    its funny how you see a decline in views and a change of community the more technical a youtube channel gets
    the car channels that just shout numbers and flash images get millions
    great stuff here

    • @hpa101
      @hpa101  3 роки тому +2

      There's something out there for everyone which is cool, but glad you're enjoying what we're putting out for you guys Richard. Appreciate the comment 🤘 - Taz.

  • @Sano685
    @Sano685 3 роки тому +1

    very good video mate.im putting a gt35 turbo in my vt v6 commocore and i want to know what ecu can i use?plss

  • @BenAboodyPhotography
    @BenAboodyPhotography 4 роки тому +1

    WOW GREAT CONTENT, KEEP UP THE GOOD WORK.

  • @stefandsc1028
    @stefandsc1028 3 роки тому +1

    are the principals similar for supercharged engines too? I'm trying to understand various torque curves for an Audi S4 B8 supercharged in order to figure out which tuning suites me best

  • @amyasseektruth8246
    @amyasseektruth8246 4 роки тому +1

    I LOVE THIS CHANNEL !!!

  • @fabrb26
    @fabrb26 4 роки тому +1

    Can you make an episode on cracks , bangs , pops map tuning , whatever they call that , to explain why it's bad or not useful on young people daily car please . So i can , again having a nice sleep at night in 2020 . Thank you !

    • @hpa101
      @hpa101  4 роки тому +2

      I think there might be one on anti-lag lined up, but we won't cover tuning just for 'aesthetics' outside of the 'ghost cam' webinar we have done. It's just not our focus or what our paid membership base wants sorry, nor is it something we do to our own vehicles - Taz.

    • @johnscott1981
      @johnscott1981 4 роки тому

      ya do realize that turbo charged engines are going to pop and bang right? Even a bpv still has a little sound to it. Get over it and let the peeps vent to atmosphere in peace...

  • @194Easy
    @194Easy 5 місяців тому

    Is it good, to set fuel cut at 100-110kPa while tuning turbocharged engine for more safety in this process at the beginning?

  • @kzz8971
    @kzz8971 3 роки тому +1

    Hey, do you have any videos on Subaru tuning?

    • @hpa101
      @hpa101  3 роки тому

      Yes, we use a Subaru in a few different tuning examples from standalone ECU tuning to using the likes of EcuTek, COBB or EcuFlash - Taz.
      PS: This package deal has everything you need to get starting learning how to tune your Subaru application: www.hpacademy.com/hpa-starter-package//?

  • @terrancecollins2696
    @terrancecollins2696 2 роки тому +2

    I feel so much smarter now lol

  • @BourneThisWay
    @BourneThisWay 2 роки тому +1

    What’s the best way to tune a base fuel map? For example, I have a R32 GTR and I tune the fuel map based on the TPS, but my AFR target map uses RPM/kPa. I’m also tuning in VE mode and my O2 control is set to use both TPS and MAP

    • @hpa101
      @hpa101  2 роки тому

      This is the lesson you want: www.hpacademy.com/blog/first-startup-no-base-map-watch-this-first-afr-initial-startup-free-lesson/?
      Hope it helps! - Taz.

  • @mackstone5303
    @mackstone5303 Рік тому +1

    So maybe this is a stupid question but is a lambda value a percentage of stoich like is .87 lambda 13% more rich than stoich and 1.15 15% more lean than stoich or am i way off base?

  • @comradecrawford3318
    @comradecrawford3318 10 місяців тому

    do you have lessons for Hondata and Haltech products?

    • @hpa101
      @hpa101  10 місяців тому

      Yes, we have content specific to both over on www.hpacademy.com
      The Hondata course is in the Practical Reflash Tuning course.
      The Haltech content is in the Practical Standalone ECU Tuning course
      This special deal packages both together along with the courses you should take before either if you are new to tuning (EFI Tuning Fundamentals and Understanding AFR) - Taz.
      www.hpacademy.com/starter-package-with-bonuses-course-series

  • @107gunner
    @107gunner 4 роки тому +1

    Thank you 🙏

  • @danloosmore8099
    @danloosmore8099 4 роки тому

    Very informative video, obviously the lower the IAT's the better but, how hot is too hot?

  • @danronck3636
    @danronck3636 4 роки тому +1

    Hi there, i got a question, been data logging my factory 1.4 tutbo Leon and recognized that under 100% pedal, throttle position won't go above 88%. There is no knock detectable and the boost is just 1bar on 102 octane. Is that a factory power limitation or just that they have the same throttle body for different engine sizes where it would go to 100% of throttle position? Thanks a lot for the amazing video lecture as usual🙏🙏🙏

    • @nicoleibundgut534
      @nicoleibundgut534 4 роки тому

      I have heared that some manufatores limit de throttle position to limit power. Is it an electrical tb? Maybe you find a limiter in any settings.

  • @rodriguezangel62
    @rodriguezangel62 2 роки тому

    How does this form of fuel tuning compare to using VE? If using a VE model the ecu will adjust fuel accordingly right? Assuming our VE is correct

  • @billbrockbank8111
    @billbrockbank8111 4 роки тому

    hi, I enjoy watching your video's and have started making some how to's for an ecu make we use here, and I'm interested in what mic setup you use in car when on the dyno, as your sound quality is good, and all I get is my voice ok until cars started then my voice disappears into the noisy background of the car... Your sound is good. Whats your setup if you dont mind sharing.. Many thanks. Bill

  • @princesssolace4337
    @princesssolace4337 7 місяців тому

    I got issue in keeping the torque under 500Nm for reliability reason on my 2012 MPS3 .... its using stock k04 with aftermarket down pipe+intercooler and cats delete .... rest of the exhaust is stock at 1.25bar tuned to 100 octane ... i settled at 300hp @ 480Nm .... if I touch 320hp, the torque gonna be above 500Nm ... I use Mazda Edit software to fiddle with the stock ECU.
    Q - is there away to raised the peak power but keep the torque at 480Nm? ... I'm at lost here

  • @roflchopter11
    @roflchopter11 4 роки тому

    Seems like the process of tuning fuel to AFRs could be automated pretty trivially. Could probably do the same with timing.
    Is that done? If not, why not?

    • @marshallbayer7398
      @marshallbayer7398 3 роки тому

      Tuners don't want to put themselves out of business.

  • @boyorougesauvage8584
    @boyorougesauvage8584 4 роки тому +2

    could you put time stamps please ? very interesting but it would make it easier to navigate through the whole hour

  • @vinzchannel01
    @vinzchannel01 2 роки тому +1

    I like it when he says ear fule rayshow

  • @xxii9911
    @xxii9911 8 місяців тому

    What if you are on stock ECU and the AFR map is RPM/Load percent?

    • @BrodeyDoverosx
      @BrodeyDoverosx 7 місяців тому

      This is easier actually. Figure out your “NA load cells”, usually 100% is 100kPa but you’ll need to figure that out by assessing your ECU maps or via data log.

  • @dalehally9871
    @dalehally9871 4 роки тому

    That last question 😂😂😂😂

  • @Staf00plz
    @Staf00plz 2 роки тому

    How did you get the car to go WOT w/o revving up the engine?

    • @hpa101
      @hpa101  2 роки тому

      The dyno holds a specific RPM, as requested by the tuner - Taz.

  • @MrJoubert1
    @MrJoubert1 3 роки тому

    why would a tuner remove boost pipes & tune ve table first, explain this pls. also why it applies to alpha n more?

    • @BrodeyDoverosx
      @BrodeyDoverosx 7 місяців тому

      No boost, let’s the tuner develop a working VE table for the engine itself. This will let you “see” the efficiency curve of the engine…You can extrapolate that “up” when you add in the turbo.

  • @242DJD
    @242DJD 4 роки тому

    Thank you

  • @sampayne1949
    @sampayne1949 4 роки тому

    What settings should you put the car on before you put it on the dyno?

  • @vrusso535i
    @vrusso535i 3 роки тому

    Are you available for hire I have a highly modified N54 and port injection is going in shortly

    • @hpa101
      @hpa101  3 роки тому

      No sorry, we only teach - Taz.

  • @kaijagekironde
    @kaijagekironde 4 роки тому

    Thanks

  • @NoName-nk8sc
    @NoName-nk8sc 2 роки тому

    Can I ask you what is your Mic in this video !?

    • @hpa101
      @hpa101  2 роки тому +1

      Not sure what it is, but don't buy it, it's not that great. This is what we use at the moment - www.bhphotovideo.com/c/product/1407870-REG/dpa_microphones_4288_dc_f_b00_mh_d_fine_core_4288_directional.html

  • @stewartrhaines
    @stewartrhaines 3 роки тому

    When setting up your tune at 6000ft altitude, would 81kpa be your transition zone instead of the 101kpa at sea level? Thanks for your help!

    • @JohnDoe-mx1sq
      @JohnDoe-mx1sq Рік тому

      I know this is a year old. Absolute pressure is absolute. If you've accounted for the extra heat from compressing the air it should be no different at 100kpa from boost or the atmosphere.

  • @panashe12ify
    @panashe12ify 4 роки тому

    hi. at 13.02 you said the conditions need to be as realistic as possible. so i was wondering wouldn't it be better street tuning?

    • @mikefoster4105
      @mikefoster4105 4 роки тому +4

      I'm not sure what video it is but he says to get the best tune you should be doing both... Wot on the Dyno, cruising should be checked and adjusted on the street....

    • @R0cketRed
      @R0cketRed 4 роки тому +2

      Yea I feel like temps on the dyno are going to be higher for sure then one the street.

    • @hpa101
      @hpa101  4 роки тому +4

      The last step of a dyno tune is to confirm your results on the street, or the track - Taz.

  • @mr.m6691
    @mr.m6691 3 роки тому

    Is there a reason for AFR to change based on gear? I recently starting messing with my car under boost. I have it 10lbs in 3rd gear full throttle 6,000rpm its 11.1 AFR, but same condition in 4th gear the AFR changes....

    • @ndog1234765
      @ndog1234765 3 роки тому +1

      My guess would be a change in engine load and a slight rise in boost during the shift

  • @boosted1241
    @boosted1241 4 роки тому +1

    Is there a big difference between cars and bikes?

    • @hpa101
      @hpa101  4 роки тому +1

      Fundamentally, no. The main differences are 4 stroke vs 2 stroke and gasoline vs diesel when it comes to EFI. Even when it comes to piston engines vs rotary the tuning fundamentals remain the same, the application of them just changes a little - Taz.

  • @beefysghost867
    @beefysghost867 4 роки тому

    Seen you posted a video about efi tuning went to watch tonight now it's private?

    • @hpa101
      @hpa101  4 роки тому

      The free live lessons are streamed live and then removed sorry, you can sign up for them here: www.hpacademy.com/free-live-lesson
      Most of the information in them is already spread around the channel, the most advantageous thing about catching them live is being able ask questions and get answers from Andre during the stream 😉- Taz.

    • @beefysghost867
      @beefysghost867 4 роки тому

      That's understandable, I'm wanting to get the reflash tuning course but not sure if it would be what I need for eurodyne maestro tuning suite my my vw jetta.

  • @dtetizada9310
    @dtetizada9310 4 роки тому

    how could the engine be sitting at 2.5k at wide open throttle? The dyno was applying load or de ignition table wasn't fine tuned enough so there cant be acceleration?

    • @hpa101
      @hpa101  4 роки тому +4

      The dyno is applying load :)

  • @gravitycharge
    @gravitycharge 3 роки тому

    how are you keeping it at a specific rpm with it at WOT

    • @gravitycharge
      @gravitycharge 3 роки тому +1

      is it a dyno specific feature

    • @2511jeremy
      @2511jeremy 3 роки тому

      @@gravitycharge inertia dyno is what you normally see this is a load bearing dyno probably alot more cost

  • @st8133
    @st8133 3 роки тому

    33:00

  • @SLYDIT
    @SLYDIT 4 роки тому

    Do you set a target afr number flat across the rpm range for a given load, or do you adjust it richer/leaner when going through some motors "torque hump/trough". Or is adjusting timing more important for that? Hope the question makes sense.

    • @sirdaylight5670
      @sirdaylight5670 4 роки тому

      Engine was at 4000 rpm when he was tuning the afr. Rpm stays, afr is changing.

  • @subyoooyoy
    @subyoooyoy 3 роки тому

    Im soooo confused. how is the throttle wide open with the rpm locked on 2500?

    • @hpa101
      @hpa101  3 роки тому

      It is a feature of this type of dyno - Taz
      www.hpacademy.com/previous-webinars/234-how-to-choose-a-dyno/

    • @subyoooyoy
      @subyoooyoy 3 роки тому

      @@hpa101 haha i thought about it all day, it was driving me nuts. It dawned on me last night before going the bed, the damn dyno is putting load on the car 🤦 Thank you sooooo much for your videos! they are so freaking informative, i love you

    • @hpa101
      @hpa101  3 роки тому

      @@subyoooyoy glad you cracked it! It's not something all dynos can do, but it's pretty standard these days and makes tuning life much easier and more accurate.
      You still do sweeping runs once you get up into the rev range though of course.
      No worries, thanks for watching and enjoying them Akram! - Taz.

  • @JaydenET
    @JaydenET 4 роки тому

    If you optimized only the timing of a car on pump gas and saw torque gains, without changing the fuel tables (or on a standalone Ignition ECU), does that effect fuel economy? In this case would it actually improve fuel economy, because you're making more power with the same amount of air and fuel? How often is it that you can see torque gains from just timing adjustment without increasing octane?

    • @konradnee844
      @konradnee844 3 роки тому

      Yes obviously the engine is producing more power with the same fuel as the ignition event happens at a mechanical superior point during the rotation.

  • @lolwhatt820
    @lolwhatt820 3 роки тому +2

    *Has no real interest in tuning*
    “Cool, an hour long video on tuning. Let’s watch this.”

  • @jackhaddon4755
    @jackhaddon4755 4 роки тому

    Will these videos now stay up permanently?

    • @hpa101
      @hpa101  4 роки тому +2

      Not sure yet. We won't release them all, but releasing some does help promote the archive there a bit as well which we haven't done a great job or so far. Would love to give it an overhaul once we have a few other things ironed out - Taz.

  • @baribari600
    @baribari600 Рік тому +1

    I just leaned today that a dyno will let you run WOT at a steady RPM…

    • @hpa101
      @hpa101  Рік тому

      Some dynos will, but not all are created equal 😎 it's a very helpful feature. Hope you enjoyed this one - Taz.

    • @baribari600
      @baribari600 Рік тому

      @@hpa101 I did. Very educational. Not going to touch the tune on my RX-7 any time soon, of course… haha

  • @kevin-jm3qb
    @kevin-jm3qb 5 місяців тому +1

    i love you

    • @hpa101
      @hpa101  5 місяців тому

      Love you back! Cheers for the support 😎

  • @herbalistsway7967
    @herbalistsway7967 3 роки тому

    I have no idea what the fuck you said that I enjoy the video

  • @reeljamescooper
    @reeljamescooper 2 роки тому

    👍🏼

  • @InClaymont
    @InClaymont 3 місяці тому

    You may consider a mic that isnt so close to your mouth or another style of microphone. As someone with an unreasonably disgusted reaction to mouth noises, it has made it close to impossible to watch very many videos. Just thought I would mention it since I can't watch the bulk of your videos due to the mic on the mouth. A lapel mic may be at least a step in the right direction. Keep it up though. It seems like good content from what I have seen.

    • @hpa101
      @hpa101  3 місяці тому

      We've since changed mics. Every one we've tried has a different trade off, but we've moved away from this setup some time ago.
      We can't change this now, but I would turn it down and turn the captions on to avoid some of the annoyance but still benefit from the content - Taz.

  • @shnill
    @shnill 3 роки тому

    Vocal fryyyyyyyyyy

  • @herbalistsway7967
    @herbalistsway7967 3 роки тому

    Yuh

  • @lguest95
    @lguest95 2 роки тому +1

    You need a cup of water, all I can hear with headphones on his how dry your mouth is

    • @hpa101
      @hpa101  2 роки тому +1

      Water! Bah! We don't want to spoil him - Taz.

  • @freddyrosenberg9288
    @freddyrosenberg9288 4 роки тому

    X

  • @SayWhaaaaaaaaaaaaaaaaaaaaaaat

    DIESEL ROCKS GAS SUCKS! :D

  • @southernswag813
    @southernswag813 2 роки тому

    He needs water

    • @hpa101
      @hpa101  2 роки тому

      3 more webinars and we'll give him some. We don't want to spoil him - Taz

  • @sanderromer6490
    @sanderromer6490 3 роки тому

    Am I the only one finding this boring? Not the content but the presentation.