The only thing I tried that worked. THANK YOU! Side note. If any plays with the updated versions like 5.0-9494 for example and is having trouble getting this to work, just get it running in 5.0 first and then open your newer version afterward. Run your game in the newer version of Dolphin(for better performance in my case) but keep 5.0 open in the background idle. The Wiimote will work for current versions of Dolphin as long as you at least have 5.0 open at the same time. Hope that's helpful to some of you. =]
5:02 For people using version 5.0-9500 and beyond, your Wiimote will vibrant each time you start the emulator, the refresh function indicated here will not be available. Best way to check is to restart the Dolphin emulator and wait for the vibration.
Honestly on PC it's going to be better than on a real wii. Because LCDs TVs had absolutely fucking awful input latency at the time of the console. They still do tbh. With my 1ms monitor it feels like nothing. Get a good monitor and input lag becomes a thing of the past.
ua-cam.com/video/FPP0ANi1-PY/v-deo.html Just found this, gets rid lag using internal bluetooth. You can use old sensor bar, just need to power it or buy a usb one. www.aliexpress.com/item/4001093553263.html?spm=a2g0o.productlist.0.0.1a5d43dc9klKgM&algo_pvid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d&algo_expid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d-14&btsid=0ab50f0815924665756305508ed2e5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Seen many videos, and been on Dolphin's web but... this video was the solution! Adding this to my favourite for future configurations! Thank you very much! :D
I really can't recommend the DolphinBar. I was impressed at first but it stopped working after 3 weeks. I then found out that the left Infra-Red LED's broke. Many people on Amazon have reported this issue too.
You need to update the firmware. They fixed the burning LEDs in the firmware. You could replace the broken infrared LED with a new one after updating the firmware.
THANK YOU SOOOO MUCH! i don't even know how you translated the "chinglish" instructions they provided but you're a godsend man. I swear i thought my bar was busted
Funny thing about Skywars Sword, th egame does not use a sensor bar for aiming, all done with the motion plus. Awesome evice, I just got mine and not set it up yet
Thanks for a very to-the-point video. The input lag on Wiimote sensor motion isn't tiny but masssive! Easily over ten frames. And for me a deal breaker.
I Have a problem. When I start the game it tells me that the connection with the wiimote was lost. But if I press the home button it works, but it's like I'm not aiming with the wiimote.
Do you know if not-original controllers, those not signed by Nintendo but still looking like ones (Wii Remote and Nunchuk) , will work with Mayflash bar?
I've bought the bar and downloaded a rom for skyward sword but even if the remote is vibrating when I open the game it tells me that the emulator disconnected the wii mote, I've tried everything and I'm kinda going crazy to make this work. Can you help?
I ordered an Oem Nintendo Wii Motion Plus and Nunchuk just so I can play Skyward Sword in 4k here's hoping it turns out nicely and im expecting my order to arrive by Monday.
@@jcalvarado07 it works 100% bro im at the last temple before demise and the dolphin bar allows up to 4 wiimotes to work DO NOT USE 3rd party only LEGIT NINTENDO wiimotes and you wont have an issue at all
I see, I have 2 problems, first, I have a Wii original sensor bar but a fake USB Bluetooth Dongle, and second my Winnie is a fake one as well so I think buying this and getting an original Wiimote will solve it all! 👌🏼 Thanks for your reply! By the way did you install the firmware? 😉
@@jcalvarado07 No as I use Windows 10 I simply bought the mayflash dolphin bar and wiimote motion plus and nunchuk from Amazon for 80$ CAD and both worked 100% with no issues.
the wiimote pairs, the light is on, but when i launch the game supermario galaxy for example, its like the wiimote isn't plugged in. Wonder if i got a faulty bar. Update: I can use the wiimote as a mouse for my computer, but the dolphin doens't seem to work with it.
Gracias (thanks) un dato más, para los que hablan español, tienes que estar a un metro de distancia para que trabaje bien la barra sensora. Ustedes prueben con la distancia. Yo pensé que la mía no servía hasta que me empeze a retirar de la pantalla
que tal el alacanze bro dicen que es un poco inestable el tema de la sensibilidad realmente vale la pena como para jugar juegos de tenis boxeo o incluso al doblar en mario kart es preciso o es muy inestable de controlar ? y funcionara a 2 metros? pienso jugar en una de 50 pulgadas gracias
Hi, i ordered the controlers with nunchak, but do I realy need the sensorbar to use it with emulator ? Does the cheap sensorbar from ebay work ? Thanks
Hello, excuse me i have a question, i have ordered in internet a Wiimote Plus with nunchuk. Is it possible to play games without Sensor Bar or we must buy the sensor bar. I would like to play Games Like Skyward Sword & Mario Galaxy.
Have to check which version I have installed but I followed your video And it seems to work! I tested mario kart and I could use the wiimote to point and select in the menu of this game. also when driving I could go to left and right with the wiimote. The refresh button didn't worked under dolphin controller configuration? It's in mode 4.
Hey I know this video is ancient at this point, but I found my Mayflash Dolphinbar in a box and wanted to get it working with the latest Dolphin, I can't figure it out though. I have Real Wiimote selected, the Wiimote is paired to the bar, it's in Mode 4, and Continuous Scanning is enabled. But, no vibration, and the controller doesn't seem to be working in Dolphin. Any thoughts?
To anyone who has a wii and sensor bar do not buy this just instal ur wii close to ur pc and plug ur bar in the wii and then place it under ur monitor it works because its the remote who senses the lights of the sensor bar
very nice and understandable video.i have in m hands the dolpin bar and i am waiting the order of wii remotes and nuncunks to connect .can you tell me plz,i have readen this : Mode 3: Game Controller Mode - Supports up to 4 Wii controllers+Nunchuck or Classic controller Mode 4: Wii Emulator Mode: Supports up to 4 wiimotes. 1) so do you use mode 4 to play WITH nunchucnk or do i have to place it in mode 3? in mode 4 you have tested and playw wii remote with nunchunk and it's ok? 2)( do i need yo update firmware of mayflash bar ? today i get that bar 3) i read the manual and writes to the wii remote you press home+directon mode right to get mode 4 (as mayflash dolphin) cause by default is in mode 1 (keyboard and mouse)..is that nessecary to do? or by syncronization get iin mode 4? cause you didint change wii remote mode in that video.. tyvm
The input lag is just the same as on the original Wii. I just played on the old white block last month, and it is absolutely terrible xD How nostalgia can blur your memories... But good to know, that you can emulate Super Mario Galaxy on PC. I never got through this game as a child, maybe I can end this pitty now...
I saw I have dolphin 3.5. My mame cabinet start directly into my mgalaxy fronted. With the mayflash also plugged in it disturbes my usb controller from my pc that controls my cabinet. So my joysticks and buttond didn't work. When unplugging the mayflash and restarting my pc it worked again. Is there a solution for this?
Looks like I lost my stand somehow! Time to get a new one. Too bad I already bought a nearly 50 dollar new wii remote and nunchuk since I read reviews from the fake ones for not working with Dolphin. I didn't even need to get a new remote and nunchuk, I just needed a new dolphin bar... fml. :D EDIT: For now, I have this going the total ghetto way. I literally used Scotch tape to stick it to the top of my TV. Unfortunately, it is covering the very top area, so I can't even see my browser tabs, lol.
Is there any way to use more than one wii remote? On their website it says you can, but it just doesnt work for me. Do you use mode 4, or a different mode?
I plugged with mayflash bar into my xbox to play games. The button inputs work just fine, but the IR sensitivity is way too high. Is there a way to lower my sensitivity?
I literally just bought a pair of wii motes and that same bar just to play Mario Galaxy on Dolphin. I watched a guide about how to configure motion and aiming and I was like "fk this sht!" 😆
I just bought a Mayflash Bar and the sensor range for my wiimote is only ~24 inches (i measured with a ruler). Any farther than that and the wiimote is unresponsive on the screen. Is his normal?
I wonder if the "alternative" Remote Plus + Nunchuk sold in the aliexpress.com (1set-Black-Wireless-Remote-Controller-For-Wii-with-Built-in-Motion-Plus-Remote) can work with this Mayflash bar.
To finally answer my own question, lol It works, but... I have a big tv, 40 inchs, and to calibrate the pointer for this kind of enviroment... It's not easy man. I tried the top, the buttom... it's not precise. The dude in the video is using a typical monitor, maybe the smaller radious makes the sensor more precise? At least that's the theory, I guess. Never played an actual wii in my entire life, I was assuming the mote worked if we pointed to the TV, not the actual bar. I have to point to the bar, I guide myself from there, I assumed we point out to the tv lol Maybe I was expecting too much. Still, it's playable.
***** Naah, the signal works fine. It's a matter of getting used to. I had the wrong impression watching other people playing this, they used the motion and the pointer as some kind of "extension" of the well know analog stick. In games like Metroid and Mario Galaxy, this shit works pretty well, almost on the same level of a mouse. At first, I imagined people simply pointing the thing to the tv itself, the pointer was super precise following the space ratio of the tv (not a small bar) etc... But the reality is far from this, lol This tech was launched 10 years ago, I was ingenous to believe nintendo achieved this kind of precision right at the get go.
***** It's because I have 15, 20 days to get accostumed with the motion thing. By no means it's more precise than a mouse, but it gets close. I was expecting some Minority Report shit, lol But what the tech actually does is pretty neat, serviceable. The materials is pretty cheap, but considering the opinion of a friend who actually owned a Wii years ago, the chinese control works exactly like the original.
Hello i got question Do you always have a diode on your belt even when you switch off wiimote and you too have Sensor on 2 switch in back i you have this bar plis tell me why is this 2 switch in the back ??
The only thing I tried that worked. THANK YOU!
Side note. If any plays with the updated versions like 5.0-9494 for example and is having trouble getting this to work, just get it running in 5.0 first and then open your newer version afterward.
Run your game in the newer version of Dolphin(for better performance in my case) but keep 5.0 open in the background idle.
The Wiimote will work for current versions of Dolphin as long as you at least have 5.0 open at the same time. Hope that's helpful to some of you. =]
5:02 For people using version 5.0-9500 and beyond, your Wiimote will vibrant each time you start the emulator, the refresh function indicated here will not be available. Best way to check is to restart the Dolphin emulator and wait for the vibration.
Kevin Masters thank you! I can finally stop clicking the refresh button like an idjut!
My remote vibrates, is connected to the dolphinbar, but the buttons don't react. Help.
@@chrisdiegobaines1250 you may need to change modes on the Dolphinbar
@@DungarooTV i'm on mode 4
Worked, thanks. Thought I needed the dolphin bar, but worked great with a usb sensor bar and laptop Bluetooth
This could also be used to play lightgun games in mame arcade.
If only there was some kind of video providing service where you could type "wii remote mame" and it would show you video's
LEGOpachinko
I’ve been looking myself but nothing yet.
Also wanted to use it in gun games in other emulators.
Hope get something sorted soon
ua-cam.com/video/9U3DXBriQOI/v-deo.html
@@LEGOpachinko ua-cam.com/video/VqA78ssTlFY/v-deo.html
Its what I use it for and loving it.
i can finally point at the screen and do stuff, and hopefully this won't disconnect like the crappy bluetooth stick
thank you
That input lag is far from tiny imo....
Well playing on hd tv's the wiimote has delay way more then crt.
Honestly on PC it's going to be better than on a real wii. Because LCDs TVs had absolutely fucking awful input latency at the time of the console. They still do tbh. With my 1ms monitor it feels like nothing. Get a good monitor and input lag becomes a thing of the past.
yeah is there a way to get around the input lag, sensor bar games are unplayable just been using the original bar does the dolphin solve this.
ua-cam.com/video/FPP0ANi1-PY/v-deo.html Just found this, gets rid lag using internal bluetooth. You can use old sensor bar, just need to power it or buy a usb one.
www.aliexpress.com/item/4001093553263.html?spm=a2g0o.productlist.0.0.1a5d43dc9klKgM&algo_pvid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d&algo_expid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d-14&btsid=0ab50f0815924665756305508ed2e5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
so still cant get the speaker to work properly but seems pass through is the way to go ua-cam.com/video/oV4hZxbOkXI/v-deo.html
Seen many videos, and been on Dolphin's web but... this video was the solution! Adding this to my favourite for future configurations! Thank you very much! :D
I just wanna say THANK YOU. That is all :)
Thanks for making this video! I found the instructions in the booklet (particularly the stuff about modes) completely indecipherable!
I really can't recommend the DolphinBar.
I was impressed at first but it stopped working after 3 weeks. I then found out that the left Infra-Red LED's broke.
Many people on Amazon have reported this issue too.
I'm sad, all the sensor bar look terrible, guess i won't be able tu fully play Wii in PC.
You need to update the firmware. They fixed the burning LEDs in the firmware. You could replace the broken infrared LED with a new one after updating the firmware.
Did you ever find a way to lower the input lag?
brought this figured out dolphin for the remotes can't wait to try on my hyper mix hdd
THANK YOU SOOOO MUCH! i don't even know how you translated the "chinglish" instructions they provided but you're a godsend man. I swear i thought my bar was busted
Funny thing about Skywars Sword, th egame does not use a sensor bar for aiming, all done with the motion plus. Awesome evice, I just got mine and not set it up yet
Thanks for a very to-the-point video. The input lag on Wiimote sensor motion isn't tiny but masssive! Easily over ten frames. And for me a deal breaker.
I Have a problem.
When I start the game it tells me that the connection with the wiimote was lost. But if I press the home button it works, but it's like I'm not aiming with the wiimote.
I have the same problem. How can it be fixed?
did you ever figure it out? i have the same problem right now
Yup, I just had to buy another controller, the genuine one. Apparently Mayflash Dolphinbar does not support third party made / copy controllers.
well im using the wii u mote and doing the same thing, any other idea?
@@hankosanko Boot your game, Go to config and hit refresh only when your save/state/game has been loaded.
Do you know if not-original controllers, those not signed by Nintendo but still looking like ones (Wii Remote and Nunchuk) , will work with Mayflash bar?
How do you use a Wii Guitar Controller with this adapter to play Clone Hero?
mine sucks and doesnt work right. i've bought three of them and they all suck. How is everyone getting them to work so well
This seems like the best investment I could ever make
Or you could just get a WII U and mod it lol
I've bought the bar and downloaded a rom for skyward sword but even if the remote is vibrating when I open the game it tells me that the emulator disconnected the wii mote, I've tried everything and I'm kinda going crazy to make this work. Can you help?
Whats mode 3 you never said what it did
Will this work with third-party Wii remotes?
I ordered an Oem Nintendo Wii Motion Plus and Nunchuk just so I can play Skyward Sword in 4k here's hoping it turns out nicely and im expecting my order to arrive by Monday.
Did it work?
@@jcalvarado07 it works 100% bro im at the last temple before demise and the dolphin bar allows up to 4 wiimotes to work DO NOT USE 3rd party only LEGIT NINTENDO wiimotes and you wont have an issue at all
I see, I have 2 problems, first, I have a Wii original sensor bar but a fake USB Bluetooth Dongle, and second my Winnie is a fake one as well so I think buying this and getting an original Wiimote will solve it all! 👌🏼 Thanks for your reply! By the way did you install the firmware? 😉
@@jcalvarado07 No as I use Windows 10 I simply bought the mayflash dolphin bar and wiimote motion plus and nunchuk from Amazon for 80$ CAD and both worked 100% with no issues.
@@GrifballNation Hey can you send me a link to the wiimote from amazon?
Thank you kindly, you see I thought the modes were for different players not actual modes, silly me, and then it worked, so thanks, again.
Ir sensor doesn’t read on mine? Brand new may flag adapter too? I ordered 1 and the other works
the wiimote pairs, the light is on, but when i launch the game supermario galaxy for example, its like the wiimote isn't plugged in. Wonder if i got a faulty bar. Update: I can use the wiimote as a mouse for my computer, but the dolphin doens't seem to work with it.
Very helpful, surprised you don't have way more subs.
Does the Dolphinbar work with third-party Wiimote?
Amazing video, I'll buy that for sure 😋
Please tell me your amazing outro song :0
Gracias (thanks) un dato más, para los que hablan español, tienes que estar a un metro de distancia para que trabaje bien la barra sensora. Ustedes prueben con la distancia. Yo pensé que la mía no servía hasta que me empeze a retirar de la pantalla
que tal el alacanze bro dicen que es un poco inestable el tema de la sensibilidad realmente vale la pena como para jugar juegos de tenis boxeo o incluso al doblar en mario kart es preciso o es muy inestable de controlar ? y funcionara a 2 metros? pienso jugar en una de 50 pulgadas gracias
My wiimote syncs up OK and I see a little box that says wiimote connected, but the game can't "see" the wiimote. The refresh button is greyed out.
Hi, i ordered the controlers with nunchak, but do I realy need the sensorbar to use it with emulator ? Does the cheap sensorbar from ebay work ? Thanks
Hello, excuse me i have a question, i have ordered in internet a Wiimote Plus with nunchuk. Is it possible to play games without Sensor Bar or we must buy the sensor bar. I would like to play Games Like Skyward Sword & Mario Galaxy.
Thank you so much... I finally set me wii remotes up easily after fumbling around for a week. Jay
very helpfull! Gonna try this out soon; bought my mayflash last summer but still in the package because no time for it.
Have to check which version I have installed but I followed your video And it seems to work! I tested mario kart and I could use the wiimote to point and select in the menu of this game. also when driving I could go to left and right with the wiimote. The refresh button didn't worked under dolphin controller configuration? It's in mode 4.
Are there any sensor bars with a clip? I don't want to use the sticky surface. It won't attach to my laptop monitor since it's too thin.
My problem was getting turned around in FPS. I could only travel in one direction.
But perhaps my settings were wrong. I'll try it again.
Does anyone know if this works with retroarch?
If your Wiimote gets disconnected, uncheck Scanning might help.
Amazing video. Helped me a lot. Thank you so much.
Wait, so if you have bluetooth on your computer, do you need a sensor bar?
Nice job, and thanks for the video. I'm sure it will help a lot of people.
So how exactly do I connect this bar wireless? It says right on the box that it can be used wirelessly but I don't see it in my Bluetooth settings.
working goog,i try speaker data and autodisconnect.Can i use this feature via bluetooth for speaker data and mayflash for controller?
Hey I know this video is ancient at this point, but I found my Mayflash Dolphinbar in a box and wanted to get it working with the latest Dolphin, I can't figure it out though. I have Real Wiimote selected, the Wiimote is paired to the bar, it's in Mode 4, and Continuous Scanning is enabled. But, no vibration, and the controller doesn't seem to be working in Dolphin. Any thoughts?
1 issue I'm having with this: the sensor bar and wiimote light up but it doesn't vibrate and I can't play games with it.
I'm having the same issue, did you manage to fix it ?
My 4 doesn't work my Wiimote turns off
It works perfectly
To anyone who has a wii and sensor bar do not buy this just instal ur wii close to ur pc and plug ur bar in the wii and then place it under ur monitor it works because its the remote who senses the lights of the sensor bar
i plugged my dolphin bar into my pc and no blue light shows on it.
very nice and understandable video.i have in m hands the dolpin bar and i am waiting the order of wii remotes and nuncunks to connect .can you tell me plz,i have readen this :
Mode 3: Game Controller Mode - Supports up to 4 Wii controllers+Nunchuck or Classic controller
Mode 4: Wii Emulator Mode: Supports up to 4 wiimotes.
1) so do you use mode 4 to play WITH nunchucnk or do i have to place it in mode 3? in mode 4 you have tested and playw wii remote with nunchunk and it's ok?
2)( do i need yo update firmware of mayflash bar ? today i get that bar
3) i read the manual and writes to the wii remote you press home+directon mode right to get mode 4 (as mayflash dolphin) cause by default is in mode 1 (keyboard and mouse)..is that nessecary to do? or by syncronization get iin mode 4? cause you didint change wii remote mode in that video..
tyvm
Much appreciated sir.
Does this help connect the Wiimote?? because my wiimote is refusing to connect
im on linux manjaro (an arch distro) for some reason mine doesnt work, pls help
Me with my desktop with bluetooth: 👁👄👁
The input lag is just the same as on the original Wii. I just played on the old white block last month, and it is absolutely terrible xD How nostalgia can blur your memories... But good to know, that you can emulate Super Mario Galaxy on PC. I never got through this game as a child, maybe I can end this pitty now...
introducing Wii motion plus, you can just buy a motion plus controller lol
No, you're wrong. The lag from using a Wii controller on PC is by far worse than using Wii controllers on the native hardware.
dude must do crossfit with those blister and calluse hands
I have a question iLinnucGaming, does the "Enable Speaker Data" option in the controller configuration enable the speaker on the Wii remote? Thanks.
yes
I saw I have dolphin 3.5. My mame cabinet start directly into my mgalaxy fronted. With the mayflash also plugged in it disturbes my usb controller from my pc that controls my cabinet.
So my joysticks and buttond didn't work. When unplugging the mayflash and restarting my pc it worked again. Is there a solution for this?
Is this good for playing games at short range, i.e., sitting comfortably in front of your computer monitor?
Cae Herlin yes
I want to play to dolphin with my joycon (Switch) but, there is an issue to point at screen with joycon ? :/
Having problem with my wii buttons not working. cursor works fine, when I need to press a button to start a game, buttons dont work. any advice?
bro do you know how yo use the sensor bar or the wiimote like a head tracker on pc?
Awesome thanks for this tutorial
I tried using game mode, but it would spin my camera like crazy if i tried to point my wii remote at it. Any fixes?
Looks like I lost my stand somehow! Time to get a new one. Too bad I already bought a nearly 50 dollar new wii remote and nunchuk since I read reviews from the fake ones for not working with Dolphin. I didn't even need to get a new remote and nunchuk, I just needed a new dolphin bar... fml. :D
EDIT: For now, I have this going the total ghetto way. I literally used Scotch tape to stick it to the top of my TV. Unfortunately, it is covering the very top area, so I can't even see my browser tabs, lol.
I have a sensor bar and a wii remote but the point feature doesn’t work, everything else does though. Help?
Is there any way to use more than one wii remote? On their website it says you can, but it just doesnt work for me. Do you use mode 4, or a different mode?
hi! Can it be used to other not wii games, Like COD for example?
It can be used to replace your mouse, so yet it can. I dont know why you would do that though XD
he meant can he use the wiimote as an input device in pc games
there's sprig ran for PC that allows you to do this without the bar I've done it before
program I don't even know how that came from program
Nice Video, subscribed just for that 1080p 60fps shit!!!
Great job on the video, thank you
what if you have a USB sensor bar from a wii? will it still work on pc?
yes it works
I can get my blue wiimote to sync but not my white one. Idk why. 🤔
i am having a issue with mine the whole process does work but when i start up a wii game my controller does nothing can you help me pls
But what if you already have Bluetooth in your pc
Can i use that for wii party games?
I plugged with mayflash bar into my xbox to play games. The button inputs work just fine, but the IR sensitivity is way too high. Is there a way to lower my sensitivity?
I have a problem, when I click the mode button it goes 1-3 but why I try getting into mode 4 there is no light and nothing happens pls help
I guess this is a dumb question but....does this allow pointing your wii remote at the screen? And does it work with Wii Motion Plus Remote?
yes
So you need the Dolphinbar in order to play games like Mario Galaxy 1 and 2. Otherwise the wiimote is just a regular controller?
CoolsBreeze yep
Holy cow, what's the name of your outro-song if I may ask ?
Ultimate by Roli MC
Thank you so much. :3
I have a MontionPlus Wiimote but I believe I still need a sensor bar in order to use the point function like in Super Mario Galaxy, correct?
Yes..
Can I use a wii remote with motion plus build in it with that?
I literally just bought a pair of wii motes and that same bar just to play Mario Galaxy on Dolphin. I watched a guide about how to configure motion and aiming and I was like "fk this sht!" 😆
My PC dont need Bluetooth right?
Because you have to connect the Wii Remote over the Sensor Bar
The sensor bar is usb and you pair to it through your mayflash bar using legit Nintendo Wii stuff or U
I just bought a Mayflash Bar and the sensor range for my wiimote is only ~24 inches (i measured with a ruler). Any farther than that and the wiimote is unresponsive on the screen. Is his normal?
what if i don't have a dolphin bar but a wii bar?
I wonder if the "alternative" Remote Plus + Nunchuk sold in the aliexpress.com (1set-Black-Wireless-Remote-Controller-For-Wii-with-Built-in-Motion-Plus-Remote) can work with this Mayflash bar.
To finally answer my own question, lol It works, but... I have a big tv, 40 inchs, and to calibrate the pointer for this kind of enviroment... It's not easy man. I tried the top, the buttom... it's not precise. The dude in the video is using a typical monitor, maybe the smaller radious makes the sensor more precise? At least that's the theory, I guess. Never played an actual wii in my entire life, I was assuming the mote worked if we pointed to the TV, not the actual bar. I have to point to the bar, I guide myself from there, I assumed we point out to the tv lol Maybe I was expecting too much. Still, it's playable.
Rafael Teles maybe the cheap off brand has poor signal to go with.
*****
Naah, the signal works fine. It's a matter of getting used to. I had the wrong impression watching other people playing this, they used the motion and the pointer as some kind of "extension" of the well know analog stick. In games like Metroid and Mario Galaxy, this shit works pretty well, almost on the same level of a mouse. At first, I imagined people simply pointing the thing to the tv itself, the pointer was super precise following the space ratio of the tv (not a small bar) etc... But the reality is far from this, lol This tech was launched 10 years ago, I was ingenous to believe nintendo achieved this kind of precision right at the get go.
Rafael Teles your other comment said something different and this one says the opposite lol
*****
It's because I have 15, 20 days to get accostumed with the motion thing. By no means it's more precise than a mouse, but it gets close. I was expecting some Minority Report shit, lol But what the tech actually does is pretty neat, serviceable. The materials is pretty cheap, but considering the opinion of a friend who actually owned a Wii years ago, the chinese control works exactly like the original.
Hello i got question Do you always have a diode on your belt even when you switch off wiimote and you too have Sensor on 2 switch in back i you have this bar plis tell me why is this 2 switch in the back ??
Awesome tutorial, worked flawlessly. Thanks!
wiimote doesn't vibrate when clicking on Refresh
help pls :/
Only works the button home. HELP !!!!!!!!!!!
I try to connect 2 wii controller but when select second the first stopped work,,, So seem work only with one controller and not mor
Does it work with multiple Wiimotes? (Local Multiplayer)
It work for two wiimotes?
I can only connect 1 remote. is that the limit?
Can you use the original Nintendo Dolphin thingy to use your wii remote to your pc?
The original Wii sensor bar? If thats what your talking about then no. The Wii bar doesnt have a USB cable.
does it can support 4 wii mote. i plan to use for play 4 people