Came for wheels bearings and got a life story about a box on the back. I suggest studying or making a couple practice runs before making us watch you learn for the first time.
Take the shock off the upper a-arm and tie it up with a piece of rope to the handle bar so it’s out of the way. then lift up on the upper a-arm And the axle will slide right out.
@@Owen-d1c6p concept is the same for different years part numbers may vary. I would recommend pressing in with a press if the freezer trick does allow you to get the bearing in all the way.
Turn out good! Some people do it different! I normally unbolt a-arms out, I've done it your way seems a bit easier, I've change out my 2014 foreman 500. I've sold that wheeler now I'm getting a new 2024 ribicon 520.
Came for wheels bearings and got a life story about a box on the back.
I suggest studying or making a couple practice runs before making us watch you learn for the first time.
Right on, bearing is still going strong.
Very good instructions
Thank you for the feedback glad it helped
Take the shock off the upper a-arm and tie it up with a piece of rope to the handle bar so it’s out of the way. then lift up on the upper a-arm
And the axle will slide right out.
@@tritonruns11 nice I'll try that when the other side goes out thanks for the advice!
What brand are the bearings please? Couldn’t quite read in the video
All balls however I would buy official Honda parts was testing these as I know the spacers will wear the bearings faster.
I didn’t need one I used a big socket and hammer took like 30sec
I hear ya, so far mine are holding up. Press may have been a better choice only time will tell
What year is it
This one is a 2013
@@thecitiots thanks but it was the wrong year
@@Owen-d1c6p concept is the same for different years part numbers may vary. I would recommend pressing in with a press if the freezer trick does allow you to get the bearing in all the way.
Does the 2017 use the same dust seals?
Ive done many in my lifetime, but not cars or trucks
How did it turn out?
Turn out good! Some people do it different! I normally unbolt a-arms out, I've done it your way seems a bit easier, I've change out my 2014 foreman 500. I've sold that wheeler now I'm getting a new 2024 ribicon 520.
@@thomasitta glad to hear it went well. New Rubicon sounds amazing I heard the ride quality is significantly better than my 13.
Got a winch and snow plow with it. Be next year snow plowing with it
@@thomasitta I hope you have snow, I didn't even pull my snowblower out this year
eye protection will help.
Good call, it's not fun getting metal in the eye.
Looks frustrating.
One step at a time you got this 🤘
Nice job man
@@OutbackOntario thank you feel free to post questions or your success
I see your a master mechanic. Good job.
@@thecitiots yup came back and referred you video, had to do a front left on my 2014 thanks again