Kenny one of the reasons I follow your channel is because you respond to your followers not to mention your cool projects! Thank you for taking the time to do that. Because I know it is time consuming.😁🛫
I like kenny I been followed him since 2018, and I do not understand why hes so underrated on youtube, yet there people in eastern europe who and get over 1 million youtube hits......... with a music background with no information... something is clearly not clear with youtube algorithms. Keep up the great work and diverse on other platforms my Canadian friend, as you really are a great star and I enjoy y our videos all the time! :)
There are a lot of channels out there that pay for bots to get subscriptions to their channel. I'm not one of those. I've been doing this since 2013 and the subscribers I have are genuine and I've earned every one of them. Would I love for this channel to explode and become extremely popular? Of course I would, but I would rather see an honest and slow growth of the channel, than to see a quick and dishonest growth that is unrealistic. Hopefully, one day, I will gain the popularity that I would like but for now, I am grateful for those who have followed me over the years and those who are newly discovering the channel. Thank you for tuning in and for taking the time to leave the kind words. I hope that you continue to enjoy the content and that you continue to tune in. Thank you.
Thanks for the kind words James. There isn't much to explain here. I use a couple of bench dogs and then a Veritas, quick release wonder dog to form the vise section. You can find them at Lee Valley. Here's a link. www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/74622-veritas-quick-release-wonder-dog?item=05G1030 I hope this helps. Thanks for tuning in to the show.
Glad that you liked it Randy. It was a lot of fun to design and use. It's pretty darn handy when it comes to cutting larger scroll saw pieces as well. Thanks for tuning in to the show.
Ken I have looked into a scrollers drill press and I was shocked at the price over $200 on some of them I have never thought of making a scrollers drill press this is something that I will have to look into it's such a simple design that I can make one in an hour if there is room on the base maybe I could drill a hole and set a small LED bulb that is battery operated to light my way when drilling it always seems that I miss a few places that needed to be drilled and that's even after checking to make sure I have them all done, Thanks Ken
Glad that you liked the project Alan. It was a lot of fun to make and for anyone who is into scrolling and fretwork, this little press is priceless. Thanks for tuning in and good luck on your build.
This was just the first, "fly by the seat of my pants" prototype Bryan. I'm sure that there will be modifications and alterations as time goes on. Thanks for tuning in and taking the time to chime in with your suggestion. It's very much appreciated.
Excellent project Ken! You gotta love Princess Auto for tools and oddball stuff, especially the surplus section. I have a motor with a drill chuck attached that I'll use for the tool. Thanks for the ideas.
You never run out of good ideas, do you? I really like this! Me and the scroll saw have a love/hate relationship, but I keep trying! Maybe this project will put me over the top, and I’ll be as good as you on the SS! Naaaaaaah! Never happen! Maybe I need to look into getting some Joe Boxers for the shop! Ha! Thanks for another good edition!
Those Joe Boxers are fantastic for cleaning up the shop. The are very absorbent for when you have an accident. (while wearing them, or not. LOL). Thanks for tuning in Tom.
Kenny, excellent project! The commercial versions cost what I think is 2 to 3 times what they should cost. Seems like your version should work every bit as well. Very nice and so easy.
I do not have a review on it Joseph but that sounds like a great idea for the show. I do love the unit and it has always served me well. I guess I need to start filming a power carver review. Thanks for tuning in and for the show idea.
Good idea. How well do you think this base would work for inlay work using your carver or a Dremel type tool? I'm guessing if it would be sturdy enough it would need at least a depth stop.
This would work very well for that purpose I think but I do agree that a depth stop would be necessary. Thanks for tuning in and for chiming in with your idea.
I'm not 100% sure what you mean by this question but I am going to go out on a limb and say that you are referring to the INCRA T-rule that I use for layout. They are available at most woodworking suppliers or directly from Incra.com. I got mine at Lee valley tools. I hope this helps. Thanks for tuning in to the show.
There are no plans for this one Woody. This was done on the fly but all the dimensions you require are in the video itself. If you follow along and take a few notes, you'll have no problems duplicating this project. Sorry about that. Thanks for tuning in to the show.
@@acutabove_woodworkings Thanks for your swift response. Much appreciated. I watch your channel with interest and its enjoyable and I learn something new everytime.
Making one ASAP. This is why your content is so important.
Glad that you like it Bob. Thanks for tuning in and good luck on your build.
Cool looking little tool... nice work...
Glad that you liked it Joel. Thanks for tuning in to the show.
Great project, this would come in very handy
For anyone who does any scrolling, it's extremely handy Brett. Thanks for tuning in to the show this week.
That's a great idea. Thank you.
You're very welcome Mark. I'm glad that you liked it. Thanks for tuning in to the show.
Great video Kenny, thanks.
Glad that you liked it Bill. Thanks for tuning in to the show.
Fantastic I have been waiting for this . These drill stands are silly money many thanks sir
Glad that you like it Stuart. Good luck on your build and thank you for tuning in to the show.
Thank you for your expertise.
You're very welcome. Thanks for tuning in to the show.
Cool tools for Tuesday great idea all it needs now is a brilliant LED light and maybe a magnifying glass. 😁🛫
There's always room for improvement. Great idea. Thanks for tuning in.
Kenny one of the reasons I follow your channel is because you respond to your followers not to mention your cool projects! Thank you for taking the time to do that. Because I know it is time consuming.😁🛫
@@TheFalconJetDriver Glad to have you on board as a regular viewer.
I like kenny I been followed him since 2018, and I do not understand why hes so underrated on youtube, yet there people in eastern europe who and get over 1 million youtube hits......... with a music background with no information... something is clearly not clear with youtube algorithms. Keep up the great work and diverse on other platforms my Canadian friend, as you really are a great star and I enjoy y our videos all the time! :)
There are a lot of channels out there that pay for bots to get subscriptions to their channel. I'm not one of those. I've been doing this since 2013 and the subscribers I have are genuine and I've earned every one of them. Would I love for this channel to explode and become extremely popular? Of course I would, but I would rather see an honest and slow growth of the channel, than to see a quick and dishonest growth that is unrealistic. Hopefully, one day, I will gain the popularity that I would like but for now, I am grateful for those who have followed me over the years and those who are newly discovering the channel. Thank you for tuning in and for taking the time to leave the kind words. I hope that you continue to enjoy the content and that you continue to tune in. Thank you.
Great as usual, please explain your great vice setup
Thanks for the kind words James. There isn't much to explain here. I use a couple of bench dogs and then a Veritas, quick release wonder dog to form the vise section. You can find them at Lee Valley. Here's a link. www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/74622-veritas-quick-release-wonder-dog?item=05G1030
I hope this helps. Thanks for tuning in to the show.
I love this I will be making one
It works really well Shawn. Good luck with your project and thanks for tuning in to the show.
PERFECT TIMING! I needed a baby-router and now I have the needed push in the proper direction. Thanks Ken!
You're very welcome Jeff. Thanks for tuning in to the show.
Clever project Kenny ….. always enjoy seeing what you come up with 🤠
Glad that you liked it Randy. Thanks for tuning in and taking the time to leave the kind words. It's appreciated.
This is really cool, I love seeing videos like this, taking a tool and making it do one more thing for you. Thank you for sharing
Glad that you liked it Randy. It was a lot of fun to design and use. It's pretty darn handy when it comes to cutting larger scroll saw pieces as well. Thanks for tuning in to the show.
Great idea I need to make one
I hope you do make one. They are super useful and a great addition to any shop's scrolling arsenal. Thanks for tuning in and good luck on your build.
nice job there kenny...
Glad that you liked it Robbi. Thanks for tuning in to the show this week.
Wonderful project, thanks for sharing your idea!!! 👍
You're very welcome. I'm glad that you liked it. Thanks for tuning in.
Wonderful project, thanks for sharing your idea.
You're very welcome Francisco. I'm glad that you liked it. Thank you for tuning in to the show this week.
Im not into scroll sawing yet. But I enjoyed the video. Neat idea.
Glad that you enjoyed the show Doug. Always great to hear your comments on the show. Thanks for tuning in
Clever man
I hope this means you liked the project. Thanks for tuning in.
Ken I have looked into a scrollers drill press and I was shocked at the price over $200 on some of them I have never thought of making a scrollers drill press this is something that I will have to look into it's such a simple design that I can make one in an hour if there is room on the base maybe I could drill a hole and set a small LED bulb that is battery operated to light my way when drilling it always seems that I miss a few places that needed to be drilled and that's even after checking to make sure I have them all done, Thanks Ken
Glad that you liked the project Alan. It was a lot of fun to make and for anyone who is into scrolling and fretwork, this little press is priceless. Thanks for tuning in and good luck on your build.
Great project and more of your ingenuity. I might have made to top section out of a transparent plastic, as you suggested.
This was just the first, "fly by the seat of my pants" prototype Bryan. I'm sure that there will be modifications and alterations as time goes on. Thanks for tuning in and taking the time to chime in with your suggestion. It's very much appreciated.
Excellent project Ken! You gotta love Princess Auto for tools and oddball stuff, especially the surplus section. I have a motor with a drill chuck attached that I'll use for the tool. Thanks for the ideas.
Glad that you liked the show Chuck. Thanks for tuning in and taking the time to leave your comment. It's appreciated.
You never run out of good ideas, do you? I really like this! Me and the scroll saw have a love/hate relationship, but I keep trying! Maybe this project will put me over the top, and I’ll be as good as you on the SS! Naaaaaaah! Never happen! Maybe I need to look into getting some Joe Boxers for the shop! Ha! Thanks for another good edition!
Those Joe Boxers are fantastic for cleaning up the shop. The are very absorbent for when you have an accident. (while wearing them, or not. LOL). Thanks for tuning in Tom.
Nice work.
I'm glad that you liked it Karl. Thanks for tuning in to the show sir.
Kenny, excellent project! The commercial versions cost what I think is 2 to 3 times what they should cost. Seems like your version should work every bit as well. Very nice and so easy.
It really does work well Paul. It's a great addition to anyone who enjoys fretwork and scrolling. Thanks for tuning in to the show.
Hi Kenny, this is a great idea. This could be adapted too many things, well done 👍🏻.
Glad that you liked it Philip. Thanks for tuning in to the show.
love to have that power carver do you have a review on it?
I do not have a review on it Joseph but that sounds like a great idea for the show. I do love the unit and it has always served me well. I guess I need to start filming a power carver review. Thanks for tuning in and for the show idea.
Good idea. How well do you think this base would work for inlay work using your carver or a Dremel type tool? I'm guessing if it would be sturdy enough it would need at least a depth stop.
That sounds like a great application for this base. What came to mind is using a drill stop collar for the depth stop.
This would work very well for that purpose I think but I do agree that a depth stop would be necessary. Thanks for tuning in and for chiming in with your idea.
Great video!! What’s the tool you use to make you boarders?
I'm not 100% sure what you mean by this question but I am going to go out on a limb and say that you are referring to the INCRA T-rule that I use for layout. They are available at most woodworking suppliers or directly from Incra.com. I got mine at Lee valley tools. I hope this helps. Thanks for tuning in to the show.
@@acutabove_woodworkings yes that was what I was talking about thank you
@@bigjohn2727 You're very welcome. Glad I could help.
Excellent !!! Are you okay sharing the plans ?
There are no plans for this one Woody. This was done on the fly but all the dimensions you require are in the video itself. If you follow along and take a few notes, you'll have no problems duplicating this project. Sorry about that. Thanks for tuning in to the show.
@@acutabove_woodworkings Thanks for your swift response. Much appreciated. I watch your channel with interest and its enjoyable and I learn something new everytime.
@@woodyal3726 Glad to hear it. Thanks for your dedication to the show.
поменьше бла бла
There are plenty other channels on UA-cam. Feel free to move along to them if you don't like the content here. Thanks for tuning in.