This is, by far, the best drill press table video on the Internet. If you are building a table for a drill press, chances are you have a good idea how to build it. This video is about the functionality of that table. Thank you so much.
English is my second language. You speak so clearly, I can hear and understand every word. Thank you for showing us this great idea about the drill press. Greetings from South Africa.
Nick and Travis, You guys are so amazing! This is the best drill press video I have ever seen. I am not worthy. At 66, I have been woodworking for 50 years now and still learn every day. Thank You, Tom K.
It's what happens when you take a long, deep dive into a subject you love. And I sometimes get the sense that the accumulation of knowledge goes had in hand with the proliferation of questions, so that no matter how much you know, there's always something you need to learn.
Hi Nick. Kirk here, or Cold Creek Craftsman. Thank you for your videos. I am a professional but still find your videos helpful. Loved the idea of turning my drill press into a pocket hole jig.
“Workshop Companion” is the one stop woodworking channel in my opinion. No need to search youtube for info that may be accurate or may be misleading, you just need to search this channel, no fluff and no fads but straight forward and all you need to know. I still can”t believe its free
If you are the same guy who put out a book series called the Workshop Companion, I had the whole series as a kid. 40 years later I am going to start a woodworking class for my high school students here in our small missionary school in Brazil. Glad I found you on video! Your dedication to this craft is now going to inspire a group of Brazilian teachers!
I've had some great teachers through the days and worked at a lot of shops, and this is one of the best and simplest table designs I've come across. can't wait to build one.
I so very much wish that I had you as an in person 10:13 instructor. I have watched all the UA-cam videos that I can find and I want to thank you so very much for your clear and concise explanations concerning woodworking. I am a rank amateur and you have helped me so much. Thanks again.
I've stopped clicking on UA-cam videos with titles in the form of "The last XYZ you will ever need" or "The Ultimate XYZ " or "Genius Idea for XYZ" or "The Best (or Nicest) XYZ you've ever seen." I broke my rule for Nick Engler and I am really glad I did. Unlike most hyperbolically title videos, this one does not disappoint. In fact it really could be the nicest drill press table! I don't know what I am more impressed with, the design, construction, or presentation. Very nice work all around. For the purpose of setting the table tilt, would it be possible to add a large fender washer either flush with or just below the melamine veneer to accommodate magnetic angle finders such as the ones made by Wixley? I don't own such a gauge so am not certain in which axis relative to the magnets they can measure angles, but depending on the capability of the gauge could it be sufficient to adhere some washers to the side of the table so the work surface is not interrupted?
Believe me I'm with you on the whole "Nicest or best, Ultimate, top 5" thing with youtube titles and I've tried to avoid doing that for any title on our youtube videos because it sounds like clickbait and its misleading or at least an opinion. But that is the name of the game with youtube. In order to keep these video's from going stagnate and being seen in search results we've had to up our game with keywords and unfortunately adding titles like this is one of the only ways to separate our video from the other 10k videos over drill press tables on youtube according to Tube Buddy and Vidiq. Trust me "Nicest" is not the word I would choose on my own.😂 As far as inlaying washers under the veneer that is a fantasic idea, we generally use a Vixon style inclinometer but push the phone one because if you have a smart phone then you have an inclinometer. - Travis
@@WorkshopCompanion Hi Travis, no judgement here on the title, especially because the video backed it. If you don't play the YT algorithm, then the YT algorithm will play you.
@@woodshopnerdery Actually, it's more like if you don't play the YT algorithm, then it won't play you. ;-) Just wanted to jump in here and say that I agree with both you and Travis about the overuse of superlatives. And the choice of "nicest" for this video was particularly cringeworthy, at least for me. Every time I read it, it has the same effect as scraping my nails across a blackboard. But research showed us that "nicest" was a better choice than "best" or "great." During my writing career, I've designed and built several of these tables, each one a little better than the last. And I already have an idea for an even better (nicerest?) drill press table -- the design evolves with experience. So if I was being entirely honest, algorithm be damned, I would have titled this vid as "pretty good."
I always have a habit of clicking the 'Like' button usually at start of the video, in order not to miss my registration of appreciation for the 'content-uploader'.. With your videos sir, I know it'll be worth my while at the beginning itself.. And it is indeed, this time as well.. Thank you so much.
I have been working with wood, tools and in workshops nearly all of my long life. I have to say that not only is this video a superb explanation and guide (forgive the pun) to the most versatile and worthwhile addition to a drill press I have ever seen. Much respect from an old "chippy" and thank you for taking the time and trouble to post.
When I saw the title I thought of a Shopsmith in Drill Press mode. Other than rack and pinion adjustment your jig has it all. You have inspired me to make one for the local community centre wood shop which has a metal working drill press complete with all the frustration you mention.
Not sure why I enjoy your videos so much. Maybe it's because of how you talk and what you say; natural, believable, usually anticipating my thoughts as I follow along. Most likely it's because you are experienced and know what you're talking about. I've seen earlier videos on the Shopsmith channel (would like to have their planer) and you've definitively improved and look forward to your next video. You're the mentor I need. Many thanks.
Wow! The front to back tilt is terrific! I needed to drill a bunch of holes sloped at 5 degrees and had a difficult time. I sure wish I saw your video before I built my drill press table! I made a fence that doesn’t need T-track slots, but yours is better. Now all you need is a way of adding a replaceable sacrificial pad so you don’t damage your beautiful top. Thank you for this video.
I just bought the plans for this and highly recommend them. They're incredibly detailed and look easy to follow. Hopefully I will follow throughout and actually build it.
Great video. I use my largest foster bit with some left over melamine to get my table surface to zero. Recently I Drilled a set of 20mm hole on the top to allow me to use my 20mm and 3/4" accessories. I was surprised at how useful this could be.
Great additions to the humble drill press Nick. The use of the dowel and stop would be good for a line of holes also. Generally incremental errors to spacing would not be a problem, unless measurements between multiple holes was a priority. I'm definitely going to fabricate the tilting top because it is often impossible to get 100% vertically accuracy with the factory cast iron top from front to back. The dust collector is a necessity - as so much mess is created especially when using large forstner bits. Great video and narrative also Nick. Thanks!!
OK, I liked you from about 3 seconds into the video. First time I've seen your channel; subbed. I find your presentation far more useful than the typical "how-to" videos. I like being presented ideas much better than being shown how to run a piece of wood through a table saw.
An outstanding video presentation. I love your clear and well practised voice and the excellent quality of your presentation. The product itself is outstanding too. Such a clever bit of kit. I am delighted to see that the plans I purchased from you meet the very high standards you already set on your visual demonstration. Now I have my work cut out to replicate such an ingenious project. Thank you so much. I love it!!
I’ve seen a bunch of drill press table videos but none that mention the tilting top, how to drill round stock without a specific jig or how to do pocket holes. Lots of great information here.
Every video of yours that I've watched so far tackles a "head scratcher" issue I've already had haha. Guess that comes with all the extra years you have on me. Necessity is the mother of all invention haha
ingenious, as usual ☺️. Mine is held to the iron table with neodyme magnets glued into the bottom of the table. And kept in position with wooden strips fitting the grooves of the iron table. So it's easily removable.
Another great idea. I’ve seen so many videos with ‘great tips’ that are irrelevant to me, yours are very practical. The only change i would make to this top would be to inlay a sacrificial wood block. You could even flush it using your router jig from another video.
Thanks for your kind words, but I disagree with the need for an inlaid wood insert to protect the table. If you have a fixed piece of sacrificial wood, you cannot easily use it for backup. I keep several pieces of scrap plywood handy not just to protect the table, but also to backup the work and prevent tear-out when the drill exits. I move the plywood just a little bit between each hole drilled so the work always has a fresh backup surface.
This is perfect. I got a used drill press that works great, but that tiny table will definitely not work. Thanks for this video. And... your dog is beautiful.
Thank you. We find it handy for lathe turning as well -- I just fasten it under the tool rest. It only gets about 50% of the shavings, but it greatly reduces the dust in the air when sanding.
There is a useful small modification that can be made to this table. If a well routed in the centre an insert of ply can be let in. This sacrificial piece of ply can be disposed of and a fresh insert used for the next operation. Ragging on the exit side of the hole will be minimised and the risk of damaging the table is significantly reduced.
Great content, and advice on getting more out of current tools. Reminds me of my shop teacher's from the early seventies when metal, woodshop and drafting were standard part of curriculum.
0:42 I've noticed so many make a new top out of wood then they attach it to the old metal table by various means. I have also noticed a lot of drill presses use a pipe for mounting to the swing and tilt gadget on the column. if it is within your abilities, I say attach a pipe to the new (wooden) wood working top and plop it in place, this also allows you to swap it out for the original metal top if you wish. Just one extremely simple method is to glue up several layers of ply and hole saw a hole through them, then glue them in place and plop your pipe piece in. BTW there is already a tilt on the original mount. 2:22
This is, by far, the best drill press table video on the Internet. If you are building a table for a drill press, chances are you have a good idea how to build it. This video is about the functionality of that table. Thank you so much.
Most welcome.
But how does one go about copying *exactly* the table Nick has here??
@@erkl8823buy the plans from the link in the video description.
This episode was so reminiscent of the late afternoon programs that came on every Sunday that I used to love to watch when I was a kid. Thank you.
English is my second language. You speak so clearly, I can hear and understand every word. Thank you for showing us this great idea about the drill press. Greetings from South Africa.
Most welcome, and Hey! from Ohio.
Nick and Travis,
You guys are so amazing! This is the best drill press video I have ever seen.
I am not worthy. At 66, I have been woodworking for 50 years now and still learn every day.
Thank You,
Tom K.
It's what happens when you take a long, deep dive into a subject you love. And I sometimes get the sense that the accumulation of knowledge goes had in hand with the proliferation of questions, so that no matter how much you know, there's always something you need to learn.
As an engineer retired with a drill press in my garage, this video suggested to me is perfect in every way.
Thanks for saying.
Hi Nick. Kirk here, or Cold Creek Craftsman. Thank you for your videos. I am a professional but still find your videos helpful. Loved the idea of turning my drill press into a pocket hole jig.
Seen a lot of these, but this one wins hands down, Thank you
Most welcome.
Your instruction and presentation are just fantastic. How am I only seeing you now?! Keep up the great work.
Thanks for the kind words. Visit often.
@@WorkshopCompanion 99999999999999
Same bro... I've been watch a heavy dose of woodworking yt for about 4 years and it just rec'd this to me last month
This table is better than most I've seen on youtube!
@6:15, Storage of the fence, EXCELLENT!
“Workshop Companion” is the one stop woodworking channel in my opinion. No need to search youtube for info that may be accurate or may be misleading, you just need to search this channel, no fluff and no fads but straight forward and all you need to know. I still can”t believe its free
If you are the same guy who put out a book series called the Workshop Companion, I had the whole series as a kid. 40 years later I am going to start a woodworking class for my high school students here in our small missionary school in Brazil. Glad I found you on video! Your dedication to this craft is now going to inspire a group of Brazilian teachers!
So good to hear. Tell your kids I wish them well. You too.
The tilt is very ingenious - that’s cool!
The ideas you have swirling around ….. 👍👍🤜🤛
Thanks, John.
I've had some great teachers through the days and worked at a lot of shops, and this is one of the best and simplest table designs I've come across. can't wait to build one.
Thanks for saying.
I so very much wish that I had you as an in person 10:13 instructor. I have watched all the UA-cam videos that I can find and I want to thank you so very much for your clear and concise explanations concerning woodworking. I am a rank amateur and you have helped me so much. Thanks again.
I have no aspirations to own a drill press but you had me enthralled with this instructional video thank you.
This is a truly amazing channel. I find it so easy to really see what, how, and why you're doing what you do. Respect to you.
Thanks for your kind words.
I've stopped clicking on UA-cam videos with titles in the form of "The last XYZ you will ever need" or "The Ultimate XYZ " or "Genius Idea for XYZ" or "The Best (or Nicest) XYZ you've ever seen." I broke my rule for Nick Engler and I am really glad I did. Unlike most hyperbolically title videos, this one does not disappoint. In fact it really could be the nicest drill press table! I don't know what I am more impressed with, the design, construction, or presentation. Very nice work all around.
For the purpose of setting the table tilt, would it be possible to add a large fender washer either flush with or just below the melamine veneer to accommodate magnetic angle finders such as the ones made by Wixley? I don't own such a gauge so am not certain in which axis relative to the magnets they can measure angles, but depending on the capability of the gauge could it be sufficient to adhere some washers to the side of the table so the work surface is not interrupted?
Believe me I'm with you on the whole "Nicest or best, Ultimate, top 5" thing with youtube titles and I've tried to avoid doing that for any title on our youtube videos because it sounds like clickbait and its misleading or at least an opinion. But that is the name of the game with youtube. In order to keep these video's from going stagnate and being seen in search results we've had to up our game with keywords and unfortunately adding titles like this is one of the only ways to separate our video from the other 10k videos over drill press tables on youtube according to Tube Buddy and Vidiq. Trust me "Nicest" is not the word I would choose on my own.😂
As far as inlaying washers under the veneer that is a fantasic idea, we generally use a Vixon style inclinometer but push the phone one because if you have a smart phone then you have an inclinometer. - Travis
@@WorkshopCompanion Hi Travis, no judgement here on the title, especially because the video backed it. If you don't play the YT algorithm, then the YT algorithm will play you.
@@woodshopnerdery Actually, it's more like if you don't play the YT algorithm, then it won't play you. ;-) Just wanted to jump in here and say that I agree with both you and Travis about the overuse of superlatives. And the choice of "nicest" for this video was particularly cringeworthy, at least for me. Every time I read it, it has the same effect as scraping my nails across a blackboard. But research showed us that "nicest" was a better choice than "best" or "great." During my writing career, I've designed and built several of these tables, each one a little better than the last. And I already have an idea for an even better (nicerest?) drill press table -- the design evolves with experience. So if I was being entirely honest, algorithm be damned, I would have titled this vid as "pretty good."
One of the most comprehensive woodworking drillpress videos I’ve ever had the pleasure of watching. Thanks for sharing!!!
Most welcome.
Fantastic! This is how a woodworking drill press table should always be built! I love it!
workshopcompanionstore.com/products/drill-press-table-plans ; but I'm guessing you figured that out already.
I always have a habit of clicking the 'Like' button usually at start of the video, in order not to miss my registration of appreciation for the 'content-uploader'.. With your videos sir, I know it'll be worth my while at the beginning itself.. And it is indeed, this time as well..
Thank you so much.
Most welcome. And thanks for your kind words.
I'm glad I found this channel
I have been working with wood, tools and in workshops nearly all of my long life. I have to say that not only is this video a superb explanation and guide (forgive the pun) to the most versatile and worthwhile addition to a drill press I have ever seen. Much respect from an old "chippy" and thank you for taking the time and trouble to post.
Most welcome.
This video is definitely going in my projects and jigs playlist. Love the ingenious design of the front to back tilt.
Thanks.
When I saw the title I thought of a Shopsmith in Drill Press mode. Other than rack and pinion adjustment your jig has it all. You have inspired me to make one for the local community centre wood shop which has a metal working drill press complete with all the frustration you mention.
Thanks for your kind words. And good luck.
I really liked your dowel peg tip for getting regular spaced holes. Thanks!
Most welcome.
Not sure why I enjoy your videos so much. Maybe it's because of how you talk and what you say; natural, believable, usually anticipating my thoughts as I follow along. Most likely it's because you are experienced and know what you're talking about. I've seen earlier videos on the Shopsmith channel (would like to have their planer) and you've definitively improved and look forward to your next video. You're the mentor I need. Many thanks.
Full of heart and love.....thank you so much.
Most welcome.
Wow! The front to back tilt is terrific! I needed to drill a bunch of holes sloped at 5 degrees and had a difficult time. I sure wish I saw your video before I built my drill press table! I made a fence that doesn’t need T-track slots, but yours is better. Now all you need is a way of adding a replaceable sacrificial pad so you don’t damage your beautiful top. Thank you for this video.
Most welcome.
I have that exact drillpress, I bought it secondhand, I was thinking of upgrading it but I am definitely keeping it now!!!!
best video I have seen in months Thank you
This is sooooooooo cool! As I grow my shop, this will definitely be implemented to my tools!
I just bought the plans for this and highly recommend them. They're incredibly detailed and look easy to follow. Hopefully I will follow throughout and actually build it.
Thanks for the endorsement. And good luck.
Thank you so much for valuable advices.
And what a wonderful assistant you’ve got!!
Most welcome...from both of us.
Just finished the drill press table and dust collector. Awesome plans. Can't believe what Ive been missing.
Thanks for saying.
Great video. I use my largest foster bit with some left over melamine to get my table surface to zero. Recently I Drilled a set of 20mm hole on the top to allow me to use my 20mm and 3/4" accessories. I was surprised at how useful this could be.
This was very informative
This is the greatest idea yet! Love the duct collector
Thanks much.
That's my weekend sorted!
A true craftsman!
So glad I found this video. That design is genius with storage
Thanks.
your explanation of way to do setup squaring cuts are easy to understand it helps a lot thank you
Most welcome.
Some very useful ideas especially the sequential dowel spacing .
This is brilliant. Especially the fence storage
Thanks for the kind words.
Great additions to the humble drill press Nick. The use of the dowel and stop would be good for a line of holes also. Generally incremental errors to spacing would not be a problem, unless measurements between multiple holes was a priority. I'm definitely going to fabricate the tilting top because it is often impossible to get 100% vertically accuracy with the factory cast iron top from front to back. The dust collector is a necessity - as so much mess is created especially when using large forstner bits. Great video and narrative also Nick. Thanks!!
Most welcome.
Genius! I've been making do with my drill press table for way too long.
Best addon ever. Great build. Thanks.
Most welcome.
Brilliant! Thank you!
Great project and presentation - again!
Love the dogerlude too!!
Thanks.
Most wel;come.
OK, I liked you from about 3 seconds into the video. First time I've seen your channel; subbed. I find your presentation far more useful than the typical "how-to" videos. I like being presented ideas much better than being shown how to run a piece of wood through a table saw.
Thanks for saying... and welcome.
An outstanding video presentation. I love your clear and well practised voice and the excellent quality of your presentation. The product itself is outstanding too. Such a clever bit of kit. I am delighted to see that the plans I purchased from you meet the very high standards you already set on your visual demonstration. Now I have my work cut out to replicate such an ingenious project. Thank you so much. I love it!!
Thanks for the kind words.
I’ve seen a bunch of drill press table videos but none that mention the tilting top, how to drill round stock without a specific jig or how to do pocket holes. Lots of great information here.
Thanks.
8:20 This video is the gift that keeps on giving. I was just wondering how repeat spaced cuts would be possible and this is it... Thank you
V good! Will have to do similar when I get my replacement drill press for my new shop.
i love the fence storage solution. Thanks for sharing.
Most welcome.
Congrats, since watching woodworking on UA-cam, THIS has been the best video ever to watch. You are as smart as you think you are :)
Thanks for saying.
The dowel stop for repeating hole is pretty clever.
Very cool guy, calm and precise without all the show off. And he likes dogs!
Really good. I wished I lived across the road. I wouldn’t leave you alone for a second!
Smart and simple idea! Thanks
Every video of yours that I've watched so far tackles a "head scratcher" issue I've already had haha. Guess that comes with all the extra years you have on me. Necessity is the mother of all invention haha
Head scratching is exactly the reason my hair is so badly behaved. ;-)
ingenious, as usual ☺️. Mine is held to the iron table with neodyme magnets glued into the bottom of the table. And kept in position with wooden strips fitting the grooves of the iron table. So it's easily removable.
Good idea for a shop where you do both woodworking and metalworking.
i love your tilt mechanism. Thank you!
Thanks for the great video Nick. I love my Shopsmith drill press, but really enjoyed this and learned a couple of things.
Blown away... Superb.
Thanks.
Wow. What a special video and jig. Thanks for sharing. Very useful.
Most welcome.
Yet another superb video and project! You sure have a gift. Thank you for sharing your wisdom and skill!
Most welcome.
Excellent video presented like a true teacher, thank you,
Most welcome.
great teacher .. thanks
Just perfect in every way
Thanks for saying.
I totally need to do this.
One of the most ingenious videos on the subject. Invaluable information, excellently presented. Thanks, thanks, thanks.
You're welcome, welcome, welcome.
love this guy
Another great idea. I’ve seen so many videos with ‘great tips’ that are irrelevant to me, yours are very practical. The only change i would make to this top would be to inlay a sacrificial wood block. You could even flush it using your router jig from another video.
Thanks for your kind words, but I disagree with the need for an inlaid wood insert to protect the table. If you have a fixed piece of sacrificial wood, you cannot easily use it for backup. I keep several pieces of scrap plywood handy not just to protect the table, but also to backup the work and prevent tear-out when the drill exits. I move the plywood just a little bit between each hole drilled so the work always has a fresh backup surface.
Very simple and usefull! Many thanks from Austria!
Many cheers from America!
That was a great production! Very ingenious solutions too. The dog at the end was a nice ending too. Thanks for producing this!
Most welcome.
Qué capo que es este tipo! me vuelvo loco
This is perfect. I got a used drill press that works great, but that tiny table will definitely not work. Thanks for this video. And... your dog is beautiful.
Yes, she is -- 16 years old, but healthy and (somewhat) alert.
Your vid was simple, instructional and effective. Thank you for sharing.
Most welcome.
Just brilliant - especially the round stock drilling feature!
Thanks for the kind words, Chris.
That tilt mechanism is really clever - very cool idea. I may try to add that to my existing table!
Thanks for saying.
Nicely done.
Just made one of the dust collectors, it’s awesome!
Thank you. We find it handy for lathe turning as well -- I just fasten it under the tool rest. It only gets about 50% of the shavings, but it greatly reduces the dust in the air when sanding.
nice jig for the brill press..thank you for share..
Most welcome.
What a great setup it’s so much better than having to put a vice on the table.
Absolutely. Much more versatile.
Brilliant video
I feel really stupid after making my drill press table this one is so simple and works so much better
Master tips.
There is a useful small modification that can be made to this table. If a well routed in the centre an insert of ply can be let in. This sacrificial piece of ply can be disposed of and a fresh insert used for the next operation. Ragging on the exit side of the hole will be minimised and the risk of damaging the table is significantly reduced.
See my thoughts on this subject in my responses to Bill Wilson, Hue Janus, and Tiny Planet Adventures.
Another absolutely BRILLIANT video!
Thanks again! From London England 👍💪😎🏴🙏
You're welcome again.
Thanks for sharing this with us
Most welcome.
You sir, have a subscriber.
You sir, have a thankful host.
Great content, and advice on getting more out of current tools. Reminds me of my shop teacher's from the early seventies when metal, woodshop and drafting were standard part of curriculum.
Thanks for saying.
0:42 I've noticed so many make a new top out of wood then they attach it to the old metal table by various means.
I have also noticed a lot of drill presses use a pipe for mounting to the swing and tilt gadget on the column. if it is within your abilities, I say attach a pipe to the new (wooden) wood working top and plop it in place, this also allows you to swap it out for the original metal top if you wish.
Just one extremely simple method is to glue up several layers of ply and hole saw a hole through them, then glue them in place and plop your pipe piece in.
BTW there is already a tilt on the original mount. 2:22
Great video
These are awesome! Thank you!
This is brilliant. I will start to build mine soon.
Thanks.
Thank you, again!
Awesome job!! Very smart