I would love to see new wrap design on the Evo10 and new wheels this evo really need a complete makeover it’s only evo that had your channel videos go viral
@Devin Niemela Please look into a product called PIG Mat. It is an oil absorbing mat that you can put down when you are working on any of your messy and oily projects. You can even drop it onto an oil spill to soak it up. We used it a lot in the factory where I used to work. You can even get the Hamo PIG Mat if you want it to match our car, lol. But it will make the clean up of a project like this so much easier. It will absorb way more oil than towels and shop towels.
He should keep the old Oven for smaller stuff and as an OG reminder to the glory of the past work it’s done. What Id do, no need the throw the bath out with the bath water!
He should keep OG oven for food too then Bobbi wouldn't have to bring him cold tacos. Can just see it now, brake calipers on one shelf, pizza on the other. 😀
Braided lines make a noticeable difference in pedal feel. Also. If there is a way to support the master cylinder from the strut bar. Some sort of rod between the two. It helps with firewall flex.
I wish i had the commitment that Devin have, its been months since i want to tune my lancer havent done yet, i have started today to sand my car, will keep working on it
Love the white powder coating. I'm 65 years old and I have a 2010 Volvo Wagon that is a special edition R Design fully loaded and I would love to do my calipers but I'm on disability after I fell from a 2 story school roof a few years ago and so I can't afford the gun you have but have you ever used one of the cheaper brands and maybe recommend one?
I was thinking of going for white when I do my calipers so excited to see how the hold up over time. I figure white will show a lot of brake dust. Also, be cool to see you try a ceramic coating like cerakote. Edit: found an old video on cerakote from you, what havent you done?
Does anyone know what the size of the Brembo front brake bolts are? Specifically, the ones that keep the Brembo brakes together not mounted to the hub.
Bro idk if your interested or not I know you love evos but you should build a 2g dsm it has same engine that a evo has just the timing belts and stuff are on opposite sides
Hey man what are the torque spec for the brembo assemble for front and back like the 4 bolts? Im putting mine back together. Id appreciate your respond thanks!
Hey devin I’m trying to do the half wrap snow camo! How much do you recommend for just half the car ? Metro restyling of course and did you go with 3m material ? Thank you 😎
Awesome Vid! Question: What model brembos would fit stock (bolt on) to an 06 STI to get the same heavy duty rear brakes that you have on your new EVO? Also, a retro style chrome finish on brembos with red decals would look Money! interested to see how you would do that type of finish? Thanks again for the great content.
I would love to see new wrap design on the Evo10 and new wheels this evo really need a complete makeover it’s only evo that had your channel videos go viral
10000%
yes! I think same thing!! A complete new wrap all the same color.....
he needs to build an R35 to blow up
I think now that there white calipers the mag blue Matte with a meaty tire would look absolutely stunning 💙
With some proper camber💦
@@Tony-tk4ht nope the car is completely fine with where it is at right now
That's what we already knew when he said the wheels gotta come back off already
Hi, I'm from Russia, your channel is very cool! It helps to draw ideas when repairing and tuning cars! Keep up the good work! Thanks!
You've done this like a million times
@Devin Niemela
Please look into a product called PIG Mat. It is an oil absorbing mat that you can put down when you are working on any of your messy and oily projects. You can even drop it onto an oil spill to soak it up. We used it a lot in the factory where I used to work. You can even get the Hamo PIG Mat if you want it to match our car, lol. But it will make the clean up of a project like this so much easier. It will absorb way more oil than towels and shop towels.
Gonna be a sad day when you get a new oven. The OG oven been there since the start 😢
He should keep the old Oven for smaller stuff and as an OG reminder to the glory of the past work it’s done. What Id do, no need the throw the bath out with the bath water!
He should keep OG oven for food too then Bobbi wouldn't have to bring him cold tacos. Can just see it now, brake calipers on one shelf, pizza on the other. 😀
Keep the OG oven for hot knifing some hash.
:)
I love seeing work being done to the EVO X.....Game changer
Awesome video!
I really like the white calibers with the blue.
As an owner of an X with brownbo, I envy those calipers.
That polar white looks amazing
Sweet video man, just popped by your shop and was good to meet you! Thanks for being so cool to a random dude just stopping by asking questions!!!
What an awesome morning. Devin & Bader new videos. Can’t beat that 👍👍
Brembo mania! Tell Bobbi to feel better soon
Braided lines make a noticeable difference in pedal feel. Also. If there is a way to support the master cylinder from the strut bar. Some sort of rod between the two. It helps with firewall flex.
Bobbie is such a supportive missus, mine would be so pissed bleeding brakes with me till midnight haha
What did you soak the calipers in
I wish i had the commitment that Devin have, its been months since i want to tune my lancer havent done yet, i have started today to sand my car, will keep working on it
Devin I believe that it’s time to change the wrap on the evo 10
Its been time like 1 year ago lmao
@@twntyfive26 like 2 years
Calipers are cool 😎, the break lines are bad Ass 💯🔥👌🏽
What product did you use for paint stripper chemical? I'm in the process of getting my Brembos re-painted.
what do you call that bucket that removes all the paint? and how do i get one?
Where can we bought them paint stripper?
Restoration is your niche, you are really good at doing things like this
Any updates on those stunning wheels that were on the s2k that would fit the EVO perfect!
Hey Devin, what torque specs did you torque the bolts that held together the caliper halves front and rear respectively? Thanks
Everything I've researched it says 30lb
Bobbie coming in clutch a day early wit the tacos 🌮 🙌🏽🙌🏽😆
Nice job on the calipers they look sick! Can't wait to see what you do next on your Evo X.
Awesome video man ! 🤘👌Those brakes and wheels look fire
i would watch these videos all day long, great content keep it up and daily
Love the look of the white calipers. Throw the red TE37’s on the 10 and it’ll look 🔥
Gute bremsen ist immer gut Devin ✌️✌️
X....... THE GRIMM RIPPER 💯💯💯
A great color on that Evo X. Who is on that background track? A great song at @the end of your videos. Stay safe brother.
Calipers came out great. However they look better on the Blue side then on the Red side.
The cream soda tho!!! I knew you only drink fire 🔥
Evo x needs a Makeover man 💯
did my eyes deceive me??? no braided brake lines on the Evo X beastie????!!!!
the white is sweet man!
Go to a restaurant liquidator you can get commercial ovens cheap
Those taco's 🌮 look #bussin👌🏽
Evo x time 👍
make a vid on ur sandblasting setup plzz
Love this evo
Can you provide a link to where i get the powdercoat stripper tank? Thanks in advance
2nd this
Amazon
Love the white powder coating. I'm 65 years old and I have a 2010 Volvo Wagon that is a special edition R Design fully loaded and I would love to do my calipers but I'm on disability after I fell from a 2 story school roof a few years ago and so I can't afford the gun you have but have you ever used one of the cheaper brands and maybe recommend one?
Hey Devin what chemicals are in the strip tank ?
You should do a tournament style race with all your cars
Absolutely amazing 🤩🤩
What if you change the camo half wrap a different color? It looked nice all white, half wrap, half solid color.
Awesome job as always bro
Looks rad!
Question, where did you get the brembo decal?
F
Amazon sells multiple kits
ill re reply to this with a link If I find it!!
@@boundbytimettv2684 thanks! I'll check there aswell
What type of barrel are you using, and what mixture of stripper material??
how much powder is needed to coat brakes? 5LBS?
What were you using to cover the piston area in the calipers?
Which socket did you use to pull those torque bolts out
Can you please tell me where you bought the seals for the brembos
So clean 🔥🔥🔥
Can't wait for you to put the ZE40's on the X...I'm pretty sure that's the plan
What do you use in that paint stripper tank?
Beautiful Beautiful Beautiful 🔥🔥👌👌👌
Sweet can I send you mine to do next🤔🤔
Can you have a link for the exact brembo stickers for the x please ?
Looks dope man. 👍🏻👏🏻
13:47 Is that disc rusty?
Looks fire asf
Those calipers are if I’m correct the same as the 2015+ wrx sti
What type of masking tape is that?
Where do you buy brembo stickers?
Hi my name is stefano where do you buy your brembo decals please ✌🏼😎
I was thinking of going for white when I do my calipers so excited to see how the hold up over time. I figure white will show a lot of brake dust. Also, be cool to see you try a ceramic coating like cerakote.
Edit: found an old video on cerakote from you, what havent you done?
Does anyone know what the size of the Brembo front brake bolts are? Specifically, the ones that keep the Brembo brakes together not mounted to the hub.
You da man broski !
You should offer brembo powder coating to us Evo guys.
I was thinking about copping the grey car on facebook that you're intrested in😂 but I wanna see you bring the best out of it
what stripper is in the tank?
i died laughing at the time lapse and all the food was disappearing XD
Diet Shasta Cream Soda?! Now that's SUS...!
Dope video devin!! Can you tell me where you buy your decals? I’ve been searching everywhere
What do you use to remove the powder coat?
Bro idk if your interested or not I know you love evos but you should build a 2g dsm it has same engine that a evo has just the timing belts and stuff are on opposite sides
I could dig a 2g gsx build.
Yeah I like those 👌🏽
I need that tape. Where can I get it?
What are the torque specs for the brembo caliper bolts?
Zshow us the bleeding procedure
how long did it take all together ?
Hey man what are the torque spec for the brembo assemble for front and back like the 4 bolts? Im putting mine back together. Id appreciate your respond thanks!
Should be 30ft/lb
super jelly the Trans in my Lancer 13 ES just blown. RIP ME
Hey devin I’m trying to do the half wrap snow camo! How much do you recommend for just half the car ? Metro restyling of course and did you go with 3m material ? Thank you 😎
Ad a video how you bleed them
Should have done gunmetal on the snow camo side
Awesome Vid! Question: What model brembos would fit stock (bolt on) to an 06 STI to get the same heavy duty rear brakes that you have on your new EVO? Also, a retro style chrome finish on brembos with red decals would look Money! interested to see how you would do that type of finish? Thanks again for the great content.
With you removing Brembo’s so damn much how do you not ever have a seized bolt 🤔
Help me with my brembo's just let me know where I need to meet you 😂😂😂
Anyone know the bgm after 13:00 , let me know.
You lucky dog! Bobie is such an awesome chick. The support is unreal! Im jealous as fuckkkkk
You should update the name of the channel to the brembo brake repainter guy.
Evo ft brembo xd 🥴
Bruh that’s sexy as shit! Those white Brembos look sexy as hell great job man! My Evo 9 brembos look like toasted bread lol
Dude it’s time for a new wrap..the half wrap is played out..switch it up 😉
Please you can put subtitles on spanish? Because i don't understand nothing
MIINT👌