One of my favorite channels for Jdm builds … people like this inspire me the most.. someday 🙏🏽😌I’ll start turning wrenches in my own shop like this can’t wait …
One of the Cleanest builds but to me i would of left the AC and not deleted it make it a real sleeper when people see the engine bay they would say oh it has AC and wont think it Hauls @$$
It's cool, don't rush it now, take your time and make it right, I'm looking forward to the hatch build too, but not that much, go over everything a few times to make sure
As soon as I saw you putting the tank in, I was thinking you prob should have done it before the other stuff lol but good job so far. She’s looking sick! You’ve done a killer job on this and the other cars!
Man this is very impressive! If I ever get another evo 8 again this is what I want to do even if it takes 10 years! It’s like better than new! The amount of work you’re willing to do and can do is amazing! Did you go to mechanics school or learn as you go Devin? Love the channel and can’t wait to see what’s next!
My Evo mechanic always marks the torqued down bolts and the area around it with a pink permanent market for 2 reasons. To check if they unbolted and also mark the ones he's done already.
After watching umpteen videos of Devin working on cars, I decided to buy tools and replace my front wheel hub and bearing nd install my coil overs, for my evo x. I could not for the life of me break loose the axle nut and gave up immediately... its now at a shop being worked on. Lol.
Devin, first of all very good work on the assembly. Did you mark the position the parts of the driveshat were assembled to put back the way it was? The driveshaft is balanced , if you assemble on a different position you may experience vibration and may need to balance it again.
It's crazy how much bushings make a difference. I had a Silverado was riding like crap put new shocks tires everything couldn't figure it out so Silverado has 8 body mounts yeah took one out it was dust put new poly's in felt like a brand new truck
Did u torque the main nut on the differential out put flange? Didn't see that in any of the videos. U need some kind of special tool to hold the flange when u tourqe it.
Hey devin I have a question here for you. I'm working on a project with my lancer se I wanted to switch the floor shifter I purchased an evo 10 floor shifter and it comes with two connectors instead of having one connector. now I really want to use this floor shifter cause I don't like stock ones so my question is any idea on wire mapping so I an make it work. Thanks
Looks Sic as, almost art, be awesome if cars came like this from the factory at same price, lol, still that was an 85k car when it was new in my country so I expect that level for that money 😂 It’s half a day, tomorrow bud, love your optimism , but you ain’t doing all that in an hour and a half, still good laugh, she gonna have be taken to car show’s after this, maybe SEMA if ya haven’t already entered here, she’s worthy of a category 🤘
i like to have one of your guys's air fresheners to put in my car i got a lancer GT that i'm trying to build up to make it look like an EVO i've got the hood a carbon fiber hood for it and everything else so i like to put your air freshener in there and tell me how much they are and how i give you the money to get one appreciate it guys i like love watching your videos
The fact that he does it by himself is insane
Another reason why I have SO much Respect for this mans!
+ filming in the process.
One of my favorite channels for Jdm builds … people like this inspire me the most.. someday 🙏🏽😌I’ll start turning wrenches in my own shop like this can’t wait …
The evo 8 had an absolutely wonderful suspension setup in the rear! Looks really nice to work on!
This Evo is on a whole other level! Everyone always talking about @TommyFyeah and his clean builds… Devins got your number homie 😈👊🔥💯
One of the Cleanest builds but to me i would of left the AC and not deleted it make it a real sleeper when people see the engine bay they would say oh it has AC and wont think it Hauls @$$
@@irvingtorres5316 a/c is so nice I’ll still have it at 1000whp lol
And the young man does it DIY stylez..... No 100K dry ice machines etc
Hey Devin, did you ever set the preload on the pinion gear for the rear differential? Don’t wanna see it shred apart after all the work you just did.
I hope he did.....if not at least see this comment.
Your comment is the reason why devin didn't put it all back together this time 😊👌🏼
It's cool, don't rush it now, take your time and make it right, I'm looking forward to the hatch build too, but not that much, go over everything a few times to make sure
Everything about that car is moving along just brilliantly, good job bro
Keep up the amazing work, love too see when you post!!
I am beginning to think this hyper blue evo8 is starting to be a sema build it’s gonna be one hell of a clean project when it’s all finished up 💯🇺🇸
These videos mean such a lot to me. Thank you!
As soon as I saw you putting the tank in, I was thinking you prob should have done it before the other stuff lol but good job so far. She’s looking sick! You’ve done a killer job on this and the other cars!
Man this is very impressive! If I ever get another evo 8 again this is what I want to do even if it takes 10 years! It’s like better than new! The amount of work you’re willing to do and can do is amazing! Did you go to mechanics school or learn as you go Devin? Love the channel and can’t wait to see what’s next!
I’m guessing you’re relatively new?
@@antoinewilliams129 🤷♂️🤷♂️🤷♂️
I’m sure it can get tough but I’m glad your so consistent with your vids ✊🏾✊🏾
you're the best man.. ! this evo look more new than a brand new lol !! this Hyper Blue Evo make me dream....
Can't wait to see the Evo finished!!
I appreciate the daily vlogs cause you give me something interesting to watch
Facts wouldn’t mind if they were a little longer tho 😂😂
Très belle restauration que tu fait sur la Evo !
Looking good Devin. Remember those intercooler piping.
Sick job so clean! 🦾✨✨✨✨
Dude ASMR af such a sick Evo. Devins the Evo guy
Absolute killer job dude🤘🏻🤘🏻🤜🏻🤛🏻
super clean 👊
that looks minty fresh. good work
I know that car gonna drive like a dream for sure 💯💯💯
Cleanest builds on YT atm bro keep it up💯🔥🤙🤙
Hard work pays off
I missed those vids i didn’t had time to watch even UA-cam Greetings from Germany ❤️ ps love your videos
My Evo mechanic always marks the torqued down bolts and the area around it with a pink permanent market for 2 reasons. To check if they unbolted and also mark the ones he's done already.
she's gonna drive like a dream now😍
After watching umpteen videos of Devin working on cars, I decided to buy tools and replace my front wheel hub and bearing nd install my coil overs, for my evo x. I could not for the life of me break loose the axle nut and gave up immediately... its now at a shop being worked on. Lol.
Beautiful work 👌👌
Sick transformation! The underside never looked so good.
Anyone else think he brought out minecraft music @3:22 ?
Devin, first of all very good work on the assembly. Did you mark the position the parts of the driveshat were assembled to put back the way it was? The driveshaft is balanced , if you assemble on a different position you may experience vibration and may need to balance it again.
If there’s a will theres a way. Always good content!!
My favorite UA-cam channel 😁 big 👍
she's brand new 😁
It's crazy how much bushings make a difference. I had a Silverado was riding like crap put new shocks tires everything couldn't figure it out so Silverado has 8 body mounts yeah took one out it was dust put new poly's in felt like a brand new truck
All the newbies Devin, doesn't make trailer princess all these cars Rip the 509🤘
Did you end up tighten the diff front plate to driveshaft? And replacing that seal or watever you had to do to leave it loose?
Did u torque the main nut on the differential out put flange? Didn't see that in any of the videos. U need some kind of special tool to hold the flange when u tourqe it.
Man U look so much happier as soon as you bought the supra
Did you eventually torque down the diff nut?
can't wait for a mountain run with the exhaust note of this Evo
Evo so fresh, it look like it just came out the Mitsubishi assemle line with all the aftermarket options.
It is looking better than i thought.
beautiful!
This is the Evo is about to be considered a restoration build . And it’s almost done ✅
Hey devin I have a question here for you. I'm working on a project with my lancer se I wanted to switch the floor shifter I purchased an evo 10 floor shifter and it comes with two connectors instead of having one connector. now I really want to use this floor shifter cause I don't like stock ones so my question is any idea on wire mapping so I an make it work.
Thanks
Devin can you do this to the subi hatch? that would be amazing to see!
I’m pretty sure Devin was good at building Legos when he was a kid
You should put lock tight on the driveshaft bolts
Thank you bro
Wonder how hard it is to pick what car he drives each day I wish I had that problem
Your a beast Devin
Last step in the project is devin placing the evo 8 in a swimming pool and filling it up with epoxy resin lol. it's becoming a masterpiece!
@Lord Humungous Yeah exactly, it will be a dioramas lol
FRESH! ✨ ✨ ✨
damn new mic?, came in clean af on the opening lmao
When those bolts go missing after getting them done, theres no way to get them back?
🔥🔥🔥👍
Soooo cleeeean 🧼🔥🧼
Looks Sic as, almost art, be awesome if cars came like this from the factory at same price, lol, still that was an 85k car when it was new in my country so I expect that level for that money 😂
It’s half a day, tomorrow bud, love your optimism , but you ain’t doing all that in an hour and a half, still good laugh, she gonna have be taken to car show’s after this, maybe SEMA if ya haven’t already entered here, she’s worthy of a category 🤘
Clean my guy!
So good.
I thought you were suppose to torque down bolts that go through bushing after the car is under load?
He said that
Devin I suggest for you to try rigid collars
🔥💯👌🏽
7:57 getting a little too paranormal activity for my liking 👻
Did you torque your diff nut?
Do you use alldata or anything like that??
Where did u get ABS sensor ?
Yess back with another day of very interesting video hope everyone here will enjoy this video 💯👌🏻🇺🇸
Love your videos
Need to see the mrs with the matching yoga outfit again ;)
🤙🏻🔰
Yeap. Still waiting for the evo 9 build. 🥲
Bulid my supra bro💨💨
I’m pretty sure those drive line bolts need Locktite
😎💪🏻
Rear shocker?
where to buy abs sensor? Pls.
Love your vids can’t wait for the subiee I have one of my own and there so much fun
Lmk when you're hiring i'll drive the built hatchie there ;)
Hi love your evos man that's my dream car
No winder bobby is always happy...
😂 fucking dope just rolled with Bobby or you devin blue rs 💙
good content.
Should do a v8 swap on the old black evo
I rate ur hyper blue evo sexy as. Keep up the motivation.. I’m all ways a evo fan.. but I have mazdaspeed
i like to have one of your guys's air fresheners to put in my car i got a lancer GT that i'm trying to build up to make it look like an EVO i've got the hood a carbon fiber hood for it and everything else so i like to put your air freshener in there and tell me how much they are and how i give you the money to get one appreciate it guys i like love watching your videos
I'm so jelous. I need to do the underbody of mine now.
Sheesh
Should wear a thick jacket so if something dose happen your protected 🤔
Never clicked so fast
still can't believe you got a supra lol
Torque everything Bro
Should of called the shop and asked them if they have your missing hardware
Tomei exhaust
anyone missing the long sweet videos?
I would’ve greased and anti-seized everything lol