Lowriders are slowly making a comeback. I grew up around them but never had one. I am looking for a Monte Carlo that Im gonna hook up. I have never installed hydraulics before myself, but thankfully I know folks who has. Lowriding is an expensive dream.
I hope they are! I got back into it in 2019. Sold a really nice Cutlass in December to fund my 64 rag top project. Maybe I should do some videos of the build
For being a suspension shop you would think these guys would know when you add switches without reinforcing the frame your asking for trouble. Regardless of it being a hopper or not there are a few areas that need reinforcement.
Nothing gonna happen with a four battery set up even if he runs 36volts to the front there’s not much to stress the the frame or body unless he does a high rear end lock up n three wheel for a couple years daily
Perfect setup for a street cruiser, same setup I put in my S10. That was my summer ride way back in 1997. Its been a long time since ive built a lowrider, but Im looking fkr a clean g-body to do a real nice body off, for a clean street cruiser.
I love your van bro! I recently just bought a "Switch Suspension Dixxon Flannel".. because I own a 1976 Chevy G20 Van also. I'd love to bring it bye sometime!
No reinforcements you are looking for trouble. I don’t care if it’s 4 batteries or not. I have been there Had to get whole new frame for my 63. And I got a Canadian one at that. Great install but would do so upgrading down line for sure. But then it depends on customer. You guys did great job on the trailing arms.
I’m new to all this but my guess is when it starts 3 wheeling as you said or bouncing when the frame could be constantly be under pressure and damage. Now for a 2 pump front side side play setup it doesn’t need it because it’s not bouncing more of lifting wheels off the ground
Sorry for the delayed response. Three wheel or lots of power and time to reinforce. This kit is very mild and will not do a thing to hurt this chassis or body.
Great video! I watch all of your content and enjoy it but as a lowrider lover, this one was one of my favorites. I'm curious as a potential future customer, what does this or something similar roughly cost? Thanks in advance!
Still could have given him FBSS with two pumps four dumps. I had a single pump two dumps, three switch in the rear of a Plymouth voyage mini van pro hopper 12" cylinders
I have a question for anybody in here that has disc brakes I have a 1963 impala I wanna do disc brakes I have 13 inch rims can anybody help me out on what disconversion I can do?
The fact that they didn't even reinforced the frame .. He will have issues later on down the road quick .. Even if its just a cruiser they should have don't that regardless..
Can’t wait to juice my Lincoln town car. Saving up rn. Got it on 13s with some beat. I’m only 20 I don’t got money for no 64 that’s big boy stuff. one day😂
Wow no other reinforcing ? U can't have one reinforcing done without the rest. One strong point will weaken a other. No matter if he's hopping or not it's all stress and overtime the frame or something will crack bend or break. Every real lowriding dude knows this. Smh shit ant going to last long
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Lowriders are slowly making a comeback. I grew up around them but never had one. I am looking for a Monte Carlo that Im gonna hook up. I have never installed hydraulics before myself, but thankfully I know folks who has. Lowriding is an expensive dream.
I hope they are! I got back into it in 2019. Sold a really nice Cutlass in December to fund my 64 rag top project. Maybe I should do some videos of the build
@michaelzubal5100 most definitely bro, spread the education and beauty.
These videos are so cool! So well put together and we need more episodes!!
Thank you 🙏🏼 trying to do a new episode every 3-4 weeks
This is my version on the American dream right here. Bad ass cruiser on switches
For being a suspension shop you would think these guys would know when you add switches without reinforcing the frame your asking for trouble. Regardless of it being a hopper or not there are a few areas that need reinforcement.
Yeah that's what I was thinking I'm seeing buckled quarters, snapped trailing arms in the car owners future.
🤣 Everyone is an expert and has their own opinion. Our experience is just based on actual cars built not just commented on🤦🏻♂️
Nothing gonna happen with a four battery set up even if he runs 36volts to the front there’s not much to stress the the frame or body unless he does a high rear end lock up n three wheel for a couple years daily
@@switchsuspension Nah buddy coming from a guy who who builds cars also, yeah your getting buckled quarters bent trailing arms.
Build it right or not at all.
I'm so happy these are back!
🙌
Great idea on how you did the power balls on the trailing arms. Most people just weld them on top. You Frenched them in. 🔥
I watched the video to see if I could learn anything more. And that was one thing I’m definitely doing on my new 64’ impala.
What’s a rough estimate on the cost of a project like this ?? Great work🔥
Happy to see you guys are back and especially with this episode featuring what my daughter calls Marco's 64' " the most beautiful gucci car"
Congratulations man that thing is nice and shout out to the shop for making it possible beautiful simple set up go get em in the street bro
Mane this is just pure motivation right here. Cnt wait to get get my 91 cadillac brougham juiced up
Perfect setup for a street cruiser, same setup I put in my S10. That was my summer ride way back in 1997. Its been a long time since ive built a lowrider, but Im looking fkr a clean g-body to do a real nice body off, for a clean street cruiser.
Right on!
You guys are so cool. That 64 is rad!
I love your van bro! I recently just bought a "Switch Suspension Dixxon Flannel".. because I own a 1976 Chevy G20 Van also. I'd love to bring it bye sometime!
We appreciate the support! If you're ever in town, stop by the shop! We would love to check out the van and give you a little tour!
Great video, with great information.
Beautiful work
Thank you very much!
Amazing video taught me a lot
Glad to hear it, thanks for watching!
No reinforcements you are looking for trouble. I don’t care if it’s 4 batteries or not. I have been there Had to get whole new frame for my 63. And I got a Canadian one at that. Great install but would do so upgrading down line for sure. But then it depends on customer. You guys did great job on the trailing arms.
Fake news
Need more videos like this 🔥🔥🔥 i have a 63 on hydro's ⚡️
At what point do yall start thinking about reinforcing the frame? Right about when 3 wheeling hits the table?
I’m new to all this but my guess is when it starts 3 wheeling as you said or bouncing when the frame could be constantly be under pressure and damage. Now for a 2 pump front side side play setup it doesn’t need it because it’s not bouncing more of lifting wheels off the ground
Sorry for the delayed response. Three wheel or lots of power and time to reinforce. This kit is very mild and will not do a thing to hurt this chassis or body.
Another amazing video
Thanks dude !!!
Great Video!!!!!!! What Carb. You switched into. Thinking about changing mines out my 82 Deville
Did he have to get the frame wrapped or re enforce the an arms and axel of anything?
If solenoid fires during pumping you have waste of power and piston dumps! Solenoid drops car no pumping needed. Right?
Great video!
I watch all of your content and enjoy it but as a lowrider lover, this one was one of my favorites.
I'm curious as a potential future customer, what does this or something similar roughly cost?
Thanks in advance!
Around $8500 all in 👊🏼
Ford Model T, VW Beetle and Ford F Series have all sold over 1 million cars in a year…as a matter of fact, the Model T did over 2 million!
Bruh where y’all located I need everything y’all did for him for my 64 i need price for everything y’all did to his I want the same exact setup
Putting Mesa, Az on the map
⚡️🐺💪🏾 solid 2 cut
Unless i missed it, but was that rug/trunk liner left in after the install?
Carpet was put back under the battery racks during final assembly 👍🏼
Nice work 👌
Thanks ✌️
How much of a difference is it from 4 battery setup to 6 battery
(2 pump) lay and play setup ? ...
This is my version of the American dream clean cruiser with juice
Where can I get those disc brake conversion kit from ?
Call or email sales. 800-928-1984 or sales@switchsuspension.com
It better to start from the ground up or get a car that was well kept ?
I wanna take my 88 cadi there nice work!
Thank you 🙏🏼
Jus got a 2010 Lincoln towncar, I jus wanna know how much does all this cost? I'm trying make this joint candy orange with orange everything
Around $8500 all in 👊
Great Video!! Guys!!👍👍🙂
Thank you 🤗
Fun video!!!
What’s a price on a set up and install like that ?
that 64 needs some Wirez and a Moon roof primo!!
So what's the estimate average price for a basic setup like this ?? Seems everyone is scared to talk about pricing. Should be nothing to hide.
Around $8500 all in 👊🏼
8500, sheesh for a basic set up with no reinforcing. Ouch. For 8500 that a 4 pump 14 battery price plus reinforced frame.
how much would a work like this cost?
If he grew up working on low riders one would think he could do his own hydros
Costs as much moneey in equipment as it does for the install
Still could have given him FBSS with two pumps four dumps. I had a single pump two dumps, three switch in the rear of a Plymouth voyage mini van pro hopper 12" cylinders
Very cool 👍🏼
Should have got the Daytons at the same time .
I have a question for anybody in here that has disc brakes I have a 1963 impala I wanna do disc brakes I have 13 inch rims can anybody help me out on what disconversion I can do?
Give the shop a call or email. We have a “zero offset” kit designed specifically for 13” & 14” wheels. 800-928-1984 or sales@switchsuspension.com
The fact that they didn't even reinforced the frame .. He will have issues later on down the road quick .. Even if its just a cruiser they should have don't that regardless..
2.5 years later, no issues 🤷🏻♂️
What’s the cost of doing a small set up like that?….ball park
Can’t wait to juice my Lincoln town car. Saving up rn. Got it on 13s with some beat. I’m only 20 I don’t got money for no 64 that’s big boy stuff. one day😂
I just turned 20 tryna juice my towncar to haha
Parabéns que trabalho show de bola aqui no 🇧🇷 amamos a cultura lowride queria ganhar a camisa da loja
Get your Switch gear here
switchsuspension.com/shop/apparel/
thanks for your attention unfortunately I can't buy it, it's too expensive for a worker 🇧🇷
Adding hydraulics to a 64 Impala is only right
Curious what a job like this would cost for parts and labor? Roughly of course lol
This would be right at $8500 😉
I wanna hopp with 4 pumps $?
💯💥💥💥💥
Amazing video, way to few likes
Thanks a ton!
That's Waz up yo
Luna had the wrong Hubcaps those are for a 63 lmpala
Wow no other reinforcing ? U can't have one reinforcing done without the rest. One strong point will weaken a other. No matter if he's hopping or not it's all stress and overtime the frame or something will crack bend or break. Every real lowriding dude knows this. Smh shit ant going to last long
😂😂😂 it's a simple lay and play set up on a Canadian chassis 64... There's absolutely no reinforcements needed
𝔭𝔯𝔬𝔪𝔬𝔰𝔪 😋
Out of curiosity how much does a set up like this cost?
How much that kit runs for
Still waiting for anyone to respond. I asked them the same thing all I got was crickets.
Around $8500 all in 👊🏼
Wheel lean isn’t cool wtf….
No reinforce Frame wrap what the hell , this car will be bent before long Frame twisted no doubt
what does a system like this cost? Any idea? ballpark?
How much you guys cost for a biuld 2pump 4 battery