Straight up petrified to do hats, my machine hasn’t even shipped but I see so many people have issues. I’m going to follow all your advice when I get the machine. Thanks again for your videos
My online training is scheduled for this Friday & I'm expected to have my hat ready to be embroidered. I can't seem to get the sweatband underneath the metal tab with the groove line in it. & this video did not show how she was able to do that . 😪
Any tips for stitching the new poly spandex structured hats? I had trouble with it being out of registration, I doubled the backing and still had issues. I did not try temporary adhesive spray or binder clips. Machine was set at 480 spm
how do i set up a graphic to put on a hat that would be either to the left or right side of the center of the front of the hat on a ricoma 1010 Please?
cebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Can you do a video from creating a hat design in the software to taking it the machine show how to get the correct size for the hat hoop? Other than just a name please.. very new that embroidery an multi needle embroidery
Hi. I think is important to know your parameters on the machine, The exact width and height size of your actual design, and if you move it down with your machine arrows. 😁 thanks.
I have a brother pr 670e , I’m completely new to embroidery but I’m having trouble seeing on patches, when I make my placement stitch and the actual stitch it always comes out bigger then what I program, why do you think that is? Love your videos btw just found them the other day
I just got my em-1010 and have only done a couple hats. Have guy found that the machine rubs on the bill of the hat and leaves a mark? Is there a way to avoid that?
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Hi..My friend just bought a Ricoma 1010, I am trying to help him but we don’t know how to go from flat driver to cap driver . The panel arrows does not want to go to the front. Please help us
Hay extremely helpful but I have one problem when I’m embroider Dadhats the brim of the hat pushes up aguantes the machine and that’s making my design flag. Any help ?
I have an EM1010 and my customer wants his logo on the left side of the hat close to the brim. I keep hearing you can embroider as close as 1/2 inch from the brim, but it won't let me. I get the error of the Y or X and my design is 1 and 1/2 inches from the brim. How do I change the threshold for this?
Trying to get the logo closer to the brim with the EM 1010- when tracing the brim jams up the hat and stops it from rotating so the hat ends up off center is there a fix for this?
Thank you. Could you teach us how to set up the high of the preset foot for 2mm or 3mm foam to be used in a 3D design for Caps on the EM1010. I think this machine is an excellent product for a business. Excellent videos, and they are an excellent resource for learning and understanding about Ricoma and the embroidery machines.
I embroidered a hat very similar to that one and got a lot of loops in the thread. The hat was bouncing a lot, no matter how I hooped it. 😫😫 What can I do to eliminate that bounce?
My machine isn't due for another 9 days ago, but I have been watching your videos. Very helpful. Thank you. The only suggestion I have is please lose the background music.
Hi there, thanks so much for watching. try reselecting your hoop from the design set menu. This should recenter your design automatically. Hope this helps! We also suggest joining our Facebook support group: Embroidery and Custom Apparel Mastery. Here you can post your creations, ask questions and learn from your peers. We hope you join us! facebook.com/groups/embroiderymastery
It is amazing how Ricoma's UA-cam channel has grown so much in just a few months, you guys are doing a great job, keep it up 😁👍
Thanks so much!
Painters tape on the bill so if it rubs on the machine while embroidering it doesn’t leave a wear mark 💪🏽
I love your videos! Thank you for all you do 👍🏻
Yeah!! 20K!
Straight up petrified to do hats, my machine hasn’t even shipped but I see so many people have issues. I’m going to follow all your advice when I get the machine. Thanks again for your videos
Watch ALL our Cap videos and practice a lot! You'll get it!
LOTS TO LEARN THANK YOU. I HAVE PE
Any specific suggestions when embroidering a 5 panel hat ?
Hi! You can check out this previously done video on our UA-cam channel, hopefully this helps!
ua-cam.com/video/g9UF3iKy8O0/v-deo.html
I want to see if you guys can do a video doing embroidery on the side and the back of the hat please I’m looking to buy the MT1502.
Hello we have some videos on this
ua-cam.com/video/92blIuRGVdQ/v-deo.html
ua-cam.com/video/D0v6vuFDoWg/v-deo.html
Hope it helps
Thank You
thank you!
Hi Can you Embroider on the side and back of caps with this machine also?
Hi Daryl, thanks so much for watching. Yes, you can!
Hi.. if I don't have any 80/12 sharp, can I use 80/12 Ball point?
My online training is scheduled for this Friday & I'm expected to have my hat ready to be embroidered. I can't seem to get the sweatband underneath the metal tab with the groove line in it. & this video did not show how she was able to do that . 😪
Hi! Please send our team an emails so they can walk you through service@ricoma.com
Well done👏👏 my question is do you have to have a resellers license to buy those blank hats? and how can we follow on IG? Thanks!
Hello. Yes here at ricoma we do have the license.
You can follow us on IG here: instagram.com/ricomahq/?hl=en
Can you embroider on sneakers with an em 1010?
Absolutely! ua-cam.com/video/USx41BEiwDA/v-deo.htmlsi=x--mpVqqVuxln_Oa
Any tips for stitching the new poly spandex structured hats? I had trouble with it being out of registration, I doubled the backing and still had issues. I did not try temporary adhesive spray or binder clips. Machine was set at 480 spm
Hey there we will look into these.
how far from the brim must we emb a design
Hi there! Check out this video that shows the best practices/tips that can help you ---->ua-cam.com/video/nl9UTNJwxLk/v-deo.html
how do i set up a graphic to put on a hat that would be either to the left or right side of the center of the front of the hat on a ricoma 1010 Please?
Hi Chuck! You can digitize it to be on different locations.
How low to the brim can a design be stitched? I have a brother machine and looking to switch out due to the brim getting in the way.
cebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Can you do a video from creating a hat design in the software to taking it the machine show how to get the correct size for the hat hoop? Other than just a name please.. very new that embroidery an multi needle embroidery
Hi there, thanks so much for watching. Please check out this video for more info: ua-cam.com/video/hCjEfRBHsUI/v-deo.html
Super helpful - Thx!
You are welcome!
Hi. I think is important to know your parameters on the machine, The exact width and height size of your actual design, and if you move it down with your machine arrows. 😁 thanks.
I have a brother pr 670e , I’m completely new to embroidery but I’m having trouble seeing on patches, when I make my placement stitch and the actual stitch it always comes out bigger then what I program, why do you think that is? Love your videos btw just found them the other day
Join our free face book group and make a post. Someone will be more than happy to help. facebook.com/groups/embroiderymastery/
How are you able to get the design so close to the brim seam of the hat?
contact our support team and they will walk you through it!
I like that it’s off center
Thanks so do we!
I just got my em-1010 and have only done a couple hats. Have guy found that the machine rubs on the bill of the hat and leaves a mark? Is there a way to avoid that?
Hi there, contact our tech support and they will walk you through how to avoid this: ricoma.com/us/tech-support
Hello, what is the tallest design you can do on a hat
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
I just bought this machine love your videos I’m actually opening it now lets see how this goes 🤦🏽♂️ lol
Thank you! we're here to help for everything!
Hi..My friend just bought a Ricoma 1010, I am trying to help him but we don’t know how to go from flat driver to cap driver . The panel arrows does not want to go to the front. Please help us
Hi for help with this make sure to contact support here - ricoma.com/US/tech-support
Hay extremely helpful but I have one problem when I’m embroider Dadhats the brim of the hat pushes up aguantes the machine and that’s making my design flag. Any help ?
Using the em 1010 btw
Hey there. Reach out to our support team for help
ricoma.com/US/tech-support
I have an EM1010 and my customer wants his logo on the left side of the hat close to the brim. I keep hearing you can embroider as close as 1/2 inch from the brim, but it won't let me. I get the error of the Y or X and my design is 1 and 1/2 inches from the brim. How do I change the threshold for this?
I suggest getting in contact with our support team so they can assist you with this. ricoma.com/US/contact-us
Trying to get the logo closer to the brim with the EM 1010- when tracing the brim jams up the hat and stops it from rotating so the hat ends up off center is there a fix for this?
If you are having issues please contact our support team.
ricoma.com/US/contact-us
How do you embroider a logo on the side of the cap?
Hi there check out this video tutorial: ua-cam.com/video/CdqfSZQ8QLc/v-deo.html&t
Could you embroidery a 3D cap design on this EM1010 machine?
Yes you can.
Thank you. Could you teach us how to set up the high of the preset foot for 2mm or 3mm foam to be used in a 3D design for Caps on the EM1010. I think this machine is an excellent product for a business.
Excellent videos, and they are an excellent resource for learning and understanding about Ricoma and the embroidery machines.
I embroidered a hat very similar to that one and got a lot of loops in the thread. The hat was bouncing a lot, no matter how I hooped it. 😫😫 What can I do to eliminate that bounce?
Hey there here is a video that might help. ua-cam.com/video/nl9UTNJwxLk/v-deo.html
Can you embroider any type of hats in the EM-1010??
yes!
My machine isn't due for another 9 days ago, but I have been watching your videos. Very helpful. Thank you. The only suggestion I have is please lose the background music.
You have any trouble doing caps
Why does my hat brim hit my machine?
I’m having the same issue 😢
Hi there, contact our tech support and they will walk you through how to avoid this: ricoma.com/us/tech-support
The background music is way to loud. It makes it hard to HEAR YOU.
Thank you for the feedback!
could really do without the background music..............otherwise I have learned alot thank you
Please discard the monotonous music
How would I go about centering a design ? My design keeps going to the side and not center
Hi there, thanks so much for watching. try reselecting your hoop from the design set menu. This should recenter your design automatically. Hope this helps! We also suggest joining our Facebook support group: Embroidery and Custom Apparel Mastery. Here you can post your creations, ask questions and learn from your peers. We hope you join us! facebook.com/groups/embroiderymastery