I had a water control valve go bad. I installed a new water control valve and I still get the E1 Error code within a few minutes. Screens are clean and water flows well. What else could cause the code?
@@skeletor751 I had to switch to wires on the two cold water valves. If you look at the original and the new valve, on mine the low pressure orifice are switched. Hope that makes sense. Just look at the outlet side of the old and new and it will be obvious.
Not a real fix but, if it fills, washes, drains then spins but won't fill to rinse, use the wash cycle as your rinse cycle. After the wash turn it off and start another wash cycle, without detergent that is a rinse. As long as it drains and spins it can work. Good luck
Couldn't have been less helpful, there Chief.
I have E: 33 code what does that means 😩
Google Midea E33 code. There's a whole list with how to fix it..
I had a water control valve go bad. I installed a new water control valve and I still get the E1 Error code within a few minutes. Screens are clean and water flows well. What else could cause the code?
Did you find out what was going on with it?. Mine is doing the exact same thing.
@@skeletor751 I had to switch to wires on the two cold water valves. If you look at the original and the new valve, on mine the low pressure orifice are switched. Hope that makes sense. Just look at the outlet side of the old and new and it will be obvious.
Thanks man I'll give it a try
It completes wash but won't fill on rinse. Help!
Not a real fix but, if it fills, washes, drains then spins but won't fill to rinse, use the wash cycle as your rinse cycle. After the wash turn it off and start another wash cycle, without detergent that is a rinse. As long as it drains and spins it can work. Good luck
My washer is showing Fd error on screen. Can anyone help?
Do anybody know where's the reset button
Cual es el arreglo ? Revisar la manguera
MALINIS NAMAN, WALANG KAHIT ANONG DUMI SA FILTER, DI PADIN NAPASOK TUBIG AWIT SA INYO
Son enteras mala No la compren