How To Replace Battery Without Soldering - READ the DESCRIPTION - Electrolux Ergorapido 18V EER75NOW

This is the easiest way to fix Electrolux cordless vacuum cleaner, just replace whole Hand Unit from different model (order the cheapest one) and change top cover. EER models can use both Hand Unit (voltage 14.4 V or 18 V), so you can upgrade 14.4 V to new 18 V.
Batteries, motor or electronic board cost around 30 to 50 € and all new parts need to be soldered. Buy whole unit. Hand unit used in this video cost 40 - 50 €.
proex.sk/produkt/rucna-jednot...
If you need help choosing the cheapest alternative, just contact me: [e-mail]
www.proexservis.sk/nahradne-d...
www.proexservis.sk/ponuka/ser...
www.proex.sk/

[@crutchgecko]

I don't understand, why not just use the new one you just bought? Was it a different model that was not compatible| or something?

[@proexservis]

Because of color, but few Ergorapido (old models) has different plastic top cover, so If you have different color it is better to replace it. When it has the same color as stick it looks better. In case of old model ergorapido then you HAVE TO replace this top cover. So by this ,,trick,, you can replace any ZB, EER, EERC, QX etc. for half price and second benefit is that you can use 18V handheld unit instead of 14.4V.
At now the cheapest handheld unit is white.

[@emilkarlsson8732]

I need to replace my ar144L15. What is the best compatible one I can get and still works with original charger?

[@proexservis]

Hello, which model it is? EER73DB? 14.4V?
You can use both handheld units, 18V or 14.4V, charger is the same for both.

[@emilkarlsson8732]

Its an EER73BP 14.4V. What handle models are compatible? Thank you for great info!!

[@proexservis]

@@emilkarlsson8732 any model from these: 14.4V (Li-Ion):
AG3105 AG3106 CX7-1-30EB CX7-1-30IW CX7-2-30BP CX7-2-30DB CX7-2-30GM CX7-2-30HO CX7-2-HO2 CX7-30BM CX7-30IW CX7-30IWFLOORSTIC EER73BP EER73DB EER73HO EER73HO2 EER73IGM EERC72EB EERC72IW EERC73EB EERC73SW ERG105 ZB106ER ZB3104 ZB3105 ZB3106 ZB3501EB ZB3501IG
18V (Li-Ion):
AG3011 AG3012 AG3013 AG3014G AG3015SW AG3211 AG3212 AG3213 AG3214G AG35POWER CX7-1-35WK CX7-1-FLEX CX7-2-35WR CX7-2-45AN CX7-2-45BM CX7-2-45WM CX7-2-45WMFLOORST CX7-2-FLEX CX7-35-FFP CX7-35CB CX7-35OKO CX7-35TM CX7-35WR CX7-35WRK EER75NOW EER75STM EER77MBM EER77SSM EER79EBM EER79SWM EER7ALLERGY EER7ALLRGY EER7ANIMAL EER7GREEN EER85SSM EER87MBM EER89IBM EERC75DB EERC75SW EERC75WRK ERGO11 ERGO12 ERGO13 MX7-7000 QX8-1-45CR ZB112ER ZB11ER ZB13ER ZB3010 ZB3011 ZB3012 ZB3013 ZB3015SW ZB3211 ZB3212 ZB3212CK ZB3213 ZB3214G ZB3325B

[@proexservis]

This handheld unit was the cheapiest one: 140110035460 (depends on country where you can buy it)

[@nazirrumani6292]

Whwre can I buy this handheld unit ?

[@proexservis]

Hi, from any electrolux service (AEG / Electrolux) or electrolux website by your country

[@rsuaresrj]

Tá de sacanagem

[@proexservis]

No, I am not kidding you. Would you rather buy battery pack for 56€ (from Electrolux) or battery cells for 40€ OR handheld unit with new motor and BMS module for 49€? You can keep old motor and module as spare parts, but replacing only batteries in ergorapido is unreasonable… plastic of motor can easily break in old ergorapido unit (another 36€ if you replaced only batteries). So it is up to you how you spend money, and time in case of soldering each cell.