I just bought my daughter a Bambu PS1 for Christmas. I hope she likes it. I'm going to show her your videos. We've never owned or used a 3D printer before. I hope it's not too difficult.
I usually check about every day or so to see if you have a new video. Today, I was at work when I saw it. I hadn't done anything all day but as soon as I try to start watching....non stop calls (the nerve of some ppl!). By the time I got through the whole thing, there had been 1000 more views! The one thing I love about small channels is that the creators often interact w/ the viewers more, but as they grow, there can be too many to keep up. You're well on your way to being 'too big' for us Macy! You deserve it.
Glad you were able to power through between all the calls :) I'm thrilled that the channel is growing but I wouldn't have any success without the viewers. I'll continue interacting as long as I'm making videos.
Love hearing about how you like printing things for your son. Just FYI, as kids get older they have opinions as to what you should be printing. My 8 and 10 year old keep the printer running almost 24-7. It's fun to set up a print over night and then it gets them out of bed in the morning on school days as they are excited to see the finished print. I'm new to 3d printing. Learning a ton from your videos. Thanks for putting it out there. Love that you're in NC, I'm an NC native - live in CO now (where its super dry and filament loves it out here).
Thanks! I’m glad you’re liking the videos. I can’t wait until my son figures out what 3d printing is. Hopefully he’s into it and I can get him his own printer to run 24/7 😂
I just want to thank you for your videos! I finally made a decision to get the Bambu Lab P1S with AMS and couldn’t be happier. I’ve used the AnkerM5C for the past year and had fun, but the prints weren’t not perfect. I printed that modern tree on the P1S today and I swear it looks like a resin print! I’m a crafter and quilter and can’t believe how this printer will expand that potential for those hobbies! I’m subscribed! Can’t wait to share with my niche audience how a 3D printer will benefit them. Just love your knowledge and content!
Is it funny how I got an m5c last year and also just got an p1s. It already is tide with print hours, couldn’t be happier.I would recommend it (p1s) over an X1 carbon.
@@Griffin-pg2qb I was just saying the something yesterday. I was telling her that there isn't any reason to get an X1C except for a few use cases she wont ever explore. So much easier to save your money and get a P1S.
All these designs look real good. So festive. You should show your Christmas tree once you have it up and decorated. Sounds like it would be a real pretty tree.
I stumbled across your channel on a youtube 3D printing spiral ive watched loads of your videos since and picked up sooo much learning a few different programs and ideas to try. Keep up the good work
Hi. Great video. Loving them all. I watched one where you put a little extra in with an order. You mentioned it was a Patreon where you can download their monthly and resell. I have been through trying to find the video but alas cannot. Would you mind sharing it here?
@@macymakes3d you are a star. Thank you so much. Looking at your Patreon too. So much useful info. Looking to order vvmy first P1S tomorrow, even though a new model is coming soon.
I bought some sunlu filament recently and got the new spools. Put in on my AMS Lite without realizing I needed an adapter. It came apart and got the floor at like 2am and completely unraveled everywhere 😂
Cool video- subscription made :) can you recommend a flexi model that I can print many of as small Christmas presents for colleagues, friends and maybe the children in kindergarten? Greetings from Austria :)
Thanks :) Glad you're here! Any of the little flexi toys on makerworld would be good for the kids, and maybe some of the planters or other decor options for the coworkers.
I have a few Rolls of Sunlu I'll have to give a try! Love the vid! :D also just got an order of Kingroon or something like that, paid 89 bucks shipped to my house for a multi pack of 10 1kg rolls!! printing with the green right now and seems to be doing ok
@@macymakes3d I did a test print with their green that came with the 10 pack and I'm impressed lol right now I got the mini doing a hulk bust in the green going! time will tell! so far so good!
@@macymakes3d The Ornament Candy Dish. I can't tell you enough how this made my day. I rarely make models. I don't have the time and I am not good at it. So with what you said about it being all over your facebook groups, it really made an old mans day. Thank you!
Can someone please tell me where I can get pla filament in flesh skin typical white person color. Elegoo suggested beige, but that is way too pale and towards yellowish. So far I bought two different rolls and they lack that slight pink, tan, olive, combination that makes skin tone. Please help. Thanks
Great video. A lot of awesome models. I've been a Patreon subscriber of PA1-Maker for several years now and Pascal is one of the best designers out there. He designs so many different types of models. Anything from Hot wheels dioramas to birdhouses and feeders. His birdhouses are built kind of like Fulvio's models. I know you would like them.
Nice! I see you have any printers and I guess a lot experience with them. Would like to ask what Bamboo Lab is better and is there any big differences?
@@macymakes3d Totally. Also happy to see Sunlu has filaments for the AMS.. And thank you so much for showing your business and how you work. Inspiring for someone like me, but my product is a niche product that has not been released yet as its still being developed.. :) Im slowly converting my Garage to a print farm (still tossing stuff I do not need hehe)
What glue do you use for your 3d models? I'm new to 3d printing and haven't had to use any glue yet, but I have some things I want to print that need it. Thanks in advance.
Stumbled across your channel! Your content is great. I have my own 3D Printing Business I've been running for 5+ years! I have a bunch of shorts on my channel🤘🏼
Please, put the audio in different languages. I’m from Brazil and I love your channel. It’ll be nice to listen in Portuguese language. You can generate it by IA or something like that
I’m sad I called the copper bronze the entire video haha, but yes I loved it! I’ll definitely be buying more.
Місяць тому+1
Damn, I enjoyed so much watching your previous videos without in video ads. I'm Premium subscriber, I do pay to not have ads and so I'm very annoyed by those ads,
Thanks for watching!! :)
The first 500 people to use my link skl.sh/macymakes3d11241 will get a 1 month free trial of Skillshare premium!
I just bought my daughter a Bambu PS1 for Christmas. I hope she likes it. I'm going to show her your videos. We've never owned or used a 3D printer before. I hope it's not too difficult.
Yay! I hope she loves it. I'm here to help if you or she needs it :)
@ I’m watching you assemble the haunted mansion! That looks way next level! 🤗
It is so beginner friendly, I’m sure she is going to love it. What a great gift 😃
She’s gonna love it! And there’s plenty of room to grow in how she’ll use it. My daughter took off and is designing her own prints! Have fun!
She is so lucky!
I usually check about every day or so to see if you have a new video. Today, I was at work when I saw it. I hadn't done anything all day but as soon as I try to start watching....non stop calls (the nerve of some ppl!). By the time I got through the whole thing, there had been 1000 more views! The one thing I love about small channels is that the creators often interact w/ the viewers more, but as they grow, there can be too many to keep up. You're well on your way to being 'too big' for us Macy! You deserve it.
Glad you were able to power through between all the calls :) I'm thrilled that the channel is growing but I wouldn't have any success without the viewers. I'll continue interacting as long as I'm making videos.
Love hearing about how you like printing things for your son. Just FYI, as kids get older they have opinions as to what you should be printing. My 8 and 10 year old keep the printer running almost 24-7. It's fun to set up a print over night and then it gets them out of bed in the morning on school days as they are excited to see the finished print. I'm new to 3d printing. Learning a ton from your videos. Thanks for putting it out there. Love that you're in NC, I'm an NC native - live in CO now (where its super dry and filament loves it out here).
Thanks! I’m glad you’re liking the videos. I can’t wait until my son figures out what 3d printing is. Hopefully he’s into it and I can get him his own printer to run 24/7 😂
I just want to thank you for your videos! I finally made a decision to get the Bambu Lab P1S with AMS and couldn’t be happier. I’ve used the AnkerM5C for the past year and had fun, but the prints weren’t not perfect. I printed that modern tree on the P1S today and I swear it looks like a resin print! I’m a crafter and quilter and can’t believe how this printer will expand that potential for those hobbies! I’m subscribed! Can’t wait to share with my niche audience how a 3D printer will benefit them. Just love your knowledge and content!
I feel the same way. There's a so many 3d printer UA-camrs out there, but her videos are the best to connect with the humble crafter.
That's awesome! I'm so glad you're enjoying the videos :) I'm glad to have you here!
Is it funny how I got an m5c last year and also just got an p1s. It already is tide with print hours, couldn’t be happier.I would recommend it (p1s) over an X1 carbon.
@@Griffin-pg2qb I was just saying the something yesterday. I was telling her that there isn't any reason to get an X1C except for a few use cases she wont ever explore. So much easier to save your money and get a P1S.
I just printed with the same copper filament ! it's amazing, I made the entire vision enclosure like that
Nice! I loved it! I'm definitely going to be using it again.
Thanks for showing that sunlu spool split - I just picked up two of their rolls and didn't realize they could be split!
All these designs look real good. So festive. You should show your Christmas tree once you have it up and decorated. Sounds like it would be a real pretty tree.
Thanks :) I'll hopefully get a glimpse of my tree in a future video!
I stumbled across your channel on a youtube 3D printing spiral ive watched loads of your videos since and picked up sooo much learning a few different programs and ideas to try. Keep up the good work
That's great! Thank you so much for watching :) I'm glad some of my random ideas have been useful for you haha
Great Video! I would love a video on creating a Christmas Village with 3D Printing. That would be great!
Some great ideas on the free ones especially, appreciate the content
I usually use super glue but I'm curious what glue you are using and how do u like it. thanks
Gorilla glue clear grip
amzn.to/3YNYIeY
I like how the holes in the new sunlu rolls make it looks like a biohazard symbol haha I dig it!
Hi. Great video. Loving them all. I watched one where you put a little extra in with an order. You mentioned it was a Patreon where you can download their monthly and resell. I have been through trying to find the video but alas cannot. Would you mind sharing it here?
Zou3d! Search that on patreon and you’ll find it.
@@macymakes3d you are a star. Thank you so much. Looking at your Patreon too. So much useful info. Looking to order vvmy first P1S tomorrow, even though a new model is coming soon.
Yay! You’re going to love it. They’re seriously the best
Great video, love the prints you have chosen!
I bought some sunlu filament recently and got the new spools. Put in on my AMS Lite without realizing I needed an adapter. It came apart and got the floor at like 2am and completely unraveled everywhere 😂
Noooo! What a disaster haha. Hopefully you were able to salvage some!
Cool that Sunlu is doing refills. Bambu continues to set the bar. So many companies still trying to catch up with their innovations.
I've printed quite a lot of Sunlu PLA and ABS and have had good results.
What i would dearly love is to know the exact filaments you got, are the pla, pla+ silk, etc, alot of options, thanks.
Love the Christmas makes and your joy at playing with them. Also just joined your Patreon today :)
Thank you so much! I’m glad you liked the models too :)
These are all super cute, you find and make some of the cutest things I’ve seen 😊
Thanks! I’m glad you liked it :)
Great video Macy.
Cool video- subscription made :) can you recommend a flexi model that I can print many of as small Christmas presents for colleagues, friends and maybe the children in kindergarten? Greetings from Austria :)
Thanks :) Glad you're here! Any of the little flexi toys on makerworld would be good for the kids, and maybe some of the planters or other decor options for the coworkers.
Lots of ideas, thanks for the links :)
Tactical kaoz comes out with fantastic models! That cookie tree box is fantastic
They’re so good! I wanted to print more of his models but ran out of time.
Amazing video I know what to print for xmas.
What glue do you use?
Gorilla glue clear grip
amzn.to/3YNYIeY
Are you going to try the new Bambu lab wood filament?
Thanks, Macy! Great Christmas projects. xo
Thank you! Glad you’re here :)
I have a few Rolls of Sunlu I'll have to give a try! Love the vid! :D also just got an order of Kingroon or something like that, paid 89 bucks shipped to my house for a multi pack of 10 1kg rolls!! printing with the green right now and seems to be doing ok
Yes! Kingroon is super cheap and prints well. Seems too good the be true haha.
@@macymakes3d I did a test print with their green that came with the 10 pack and I'm impressed lol right now I got the mini doing a hulk bust in the green going! time will tell! so far so good!
I am so excited that you collected one of my models!
Which one!?
@@macymakes3d The Ornament Candy Dish. I can't tell you enough how this made my day. I rarely make models. I don't have the time and I am not good at it. So with what you said about it being all over your facebook groups, it really made an old mans day. Thank you!
Can someone please tell me where I can get pla filament in flesh skin typical white person color. Elegoo suggested beige, but that is way too pale and towards yellowish. So far I bought two different rolls and they lack that slight pink, tan, olive, combination that makes skin tone. Please help. Thanks
Great video. A lot of awesome models. I've been a Patreon subscriber of PA1-Maker for several years now and Pascal is one of the best designers out there. He designs so many different types of models. Anything from Hot wheels dioramas to birdhouses and feeders. His birdhouses are built kind of like Fulvio's models. I know you would like them.
Yes! I plan on doing a bird house video in the spring so I’ll definitely be including some of his models.
Lots of ideas thx! What kind of glue do you use? Ty!🎉
Gorilla glue clear grip
I love the stuff Skipper07 makes and ahve printed quite a few of them. I am amazed they are free.
Right!? They’re so fun!
Nice! I see you have any printers and I guess a lot experience with them. Would like to ask what Bamboo Lab is better and is there any big differences?
just noticed that you also have a define mic. I'm still astonished as how good it sounds. :)
Right!? And for pretty cheap too. Super happy with it
@@macymakes3d Totally. Also happy to see Sunlu has filaments for the AMS.. And thank you so much for showing your business and how you work. Inspiring for someone like me, but my product is a niche product that has not been released yet as its still being developed.. :) Im slowly converting my Garage to a print farm (still tossing stuff I do not need hehe)
Can I ask what kind of glue you use. The stuff I have does not work well
Gorilla glue clear grip. It works ok, but I'm still on the hunt for something better.
What glue do you use for your 3d models? I'm new to 3d printing and haven't had to use any glue yet, but I have some things I want to print that need it. Thanks in advance.
I use gorilla glue clear grip
There is an error in description - link to sunlu filament doesnt include you ref
Does Sunlu actually sell refills? I can't seem to find them.
great job
If we join patron where you give us access to files, does this include mini rx files?
No, sorry! I don't own the files, I just print/ship for them in the US.
I really like the box’s but it’s 11hr print. Did you manage to bring down the build time? If so can you please share it.
I didn’t change anything for that print. Just ate the 11 hours haha
Thanks for sharing, what glue do you use?
Gorilla glue clear grip
amzn.to/3YNYIeY
Whoo Hooo Christmas :)
🎅🎅🎅
What kind of glue do you use?
Gorilla glue clear grip
amzn.to/3YNYIeY
Those hole on the Sunlu spool are too large, And don't fit properly on the ams lite
then print an adapter
what are you using to glue?
Gorilla Glue clear grip
amzn.to/3YNYIeY
Hey Macy, what's the name of the 3D designer that made that cool Halloween manor? Wonder if they have xmas themed houses/villages?
Fulv 3d on cults! He has lots of Christmas models. I’m working on the toy factory right now.
@@macymakes3d ty!
How many printers do you have?
I have 10 now
It is a Macy Makes kinda day! What are we making today, I wonder?
So many amazing things! Glad you’re here :)
@@macymakes3d The Ferris Wheel is now officially printing! You find the coolest stuff to print!
Will you sell these?
No, I just printed them for the video.
Stumbled across your channel! Your content is great.
I have my own 3D Printing Business I've been running for 5+ years! I have a bunch of shorts on my channel🤘🏼
That’s great! Thanks for watching, I’m glad you’re here :)
hi you are my foavte youtuber
Thanks for watching Jack! I'm glad you're here :)
Please, put the audio in different languages. I’m from Brazil and I love your channel. It’ll be nice to listen in Portuguese language. You can generate it by IA or something like that
Awesome
i printed the snowflakes in red green silver gold white and in winter from Inland and they turned out gorgus( i cannot spell very well lol)
I bet they looked so good! I need to print more colors for mine too!
You should follow and like ideas you like
Macy what kind of glue do you use putting items together with?
Gorilla glue clear grip
amzn.to/3YNYIeY
That red copper and the silver are both excellent. I just finished a project using them both.
I’m sad I called the copper bronze the entire video haha, but yes I loved it! I’ll definitely be buying more.
Damn, I enjoyed so much watching your previous videos without in video ads. I'm Premium subscriber, I do pay to not have ads and so I'm very annoyed by those ads,
The models shown are not for commercial purposes, which means you are not allowed to sell them.
Thank you, I’m aware :) I just print these models for UA-cam videos. I don’t sell them.
if it's not green it's not a christmas tree