Chevy Rollback Revival! 60+ miles, no engine, on the road and towing after 10+ years?
Вставка
- Опубліковано 9 жов 2024
- Me and Ike bought a 83 Chevy c30 rollback. Oh with no engine, can we just show up with an engine an hour and a half away and stab it in and drive it home 60 miles to go tow a 3500 hd? How many times does it overheat?
Wanna talk to a ramblin idiot?
Completetoiletgarage@gmail.com - Авто та транспорт
Hahahaha 😂, Wes makes the truest statement ever! "If you don't feel like flaring it twice, put the fucking fitting on first..."😅😅😅😅😅
Yup,you're both stunned lol! Another minty assed vidja,toss the sick 350 and insert the dirty diesel complete w rims and new pipes,miiiint!!
STUUUUNNNEEEEDDD!
Fuckin Willard is stunned again?
I’ve seen a shit ton of will it start/ revival vids but I gotta tell ya! This one is great!! You’ve easily reached “Peg” status!!
Oh hell yeah haven't even watched the video can't hit that like button any harder without breaking my phone I've never been bored with the single episode entertained all the way and had fun thank you really appreciate the work you put in your videos for us I know it takes way longer to do a simple job because you have to video it I can only imagine what it it's like doing it all the time do a great job again thank you
I appreciate that fella! It does add time, but I enjoy it!
The guy had a sweet orange 60's gem where you picked up that tonner! Dang it caught my eye!!
63 with the original straight 6 and 3 on the tree. Guy restored it he's had for 20 years. Minty!
Ok bud awesome video. I would first like to say that you passed my parents house in Florence at 37:22. You are right about Taberg being meth town, USA. I'm going to say one thing though, Majestic jew did not put any money in that truck, because well he is who he is. Glad to see that old truck running again.
You're damn right!
I mean, contrary to what ole Peg says, Chevy's usually run, if they don't then something is seriously fucked and I have questions.
Awesome. Better than those other channels "revive" & drives, its one thing to start something thats been sitting, whole other level when you got to bring an engine along to do so.
I've seen drywall screws used for lots of things, but I think this is a first for seeing one used as a brake port plug. Waiting to see what other hackery gets uncovered on this one.
ya she was pretty hacked together, time to un-fck it!
Dude WTF you talkin about great video IM STUNNED!!!
Can we talk about the minty 656 in this video next time? Lol the fact that your tools were organized on that hood tells me you aren't a hack so busted that's not how a derlick would do it!! Lol great video man love it!!
Congrats you guys! Love the episode.
Out in the country here in a America we wave at each other. We're not all giant pricks.
I got shoulder issues from doing yardwork. Not from the work. From wavin to all the people driving by.
"How ya doin"👋
Best video yet, keep them coming 👍🏻
Just had a ball the whole video, ole rollback gonna be sweet.
Howdy bloke. Aww yeah, some fresh CTG work. Strap in people, this will be good. Hope ya been well mate. Cheers
Nice job getting that rig home.i have a 93 3500hd but its a gasser its a beast of a rig. Hope u guys get her running
I adore these old work trucks. I currently own a 77 C30 with a mechanical wrecker bed, and an add on hydraulic wheel lift. Its also a 350 4spd truck. But i keep looking at square body roll backs like this one. I want one
I’d love to see that get swapped with that rear and and diesel !
Every stop is going to be different 😆 🤣 😂
When loading things on your rollback. Roll your bed forward like 95% of the way before you tilt it down, leaving it way back and tilting it down puts a lot of leverage and weight back. Good way to bend your bed and break stuff. Funny chanel,just found you tonight. Liked and subscribed.
thanks fella! will do!
You are correct...Gm with iron heads can cook over and over. 4.3 does same, and I'm sure its part of the reason Buick 3.8 last like they do. Iron heads =same rate of expansion....don't start asking about LS stuff because I don't know how it stays together when they cook. But they seem to have solid enough sealing surfaces
awesome vid! Hope to see that diesel/5speed and axle swap too!
Great vidyah cave sam !
That thing is BRUTE. Rollbacks are the only way to go. Cant believe how many times you overheated that 350...!!!! Hahahaha Great video man! Epic!
hahaah thanks fella
I'm a Ford guy but I will say that gm does have some vehicles that could go to the moon and back with all the abuse, but the next one off the line couldn't make it off the lot. When you find that runner don't touch it.
Awesome video👍. She’s hot but she still got the job done. You gotta love the durability of these engines 😊🇺🇸
Now see when I come onto the bitch tube this is the minty videos I wanna see on my page ,definitely one of my favs
No expanding foam..... no self tapping sheetmetal screws.... no duck tape?????
Way nicer than my old square body plow truck
lmao i flared with an impact on the old school flaring tool like that, it does work haha!!
The American zip ties n bias plies! You guys rock!
First time watching your videos definitely will be back subscriber for life👍🏻👍🏻👍🏻👍🏻
hahah welcome to the fackery!
Now it would be an interesting picture, if you using the Tow Dolly, pulled by the Blazer with the flatbed on it.
All you did when it overheated, is steam cleaned the AC Box.
Fucking great! Small blocks don't give any fucks when ran hot n I personally know this.
Just gettin it. Plain and simple.
Tht was the best can’t wait for the next one
Great video, nice save on that chassis dudes.
what a hot pile of shit perfect for the complete toilet garage! loved the clip of peg 😂🍻🚬💨
I remember back in high school 03 I use go work on alot of squeak bodies there was one that scared the living Jesus out of me it was a 90 GMC Jimmy classic with no headers on the engine this thing used to set off nine car alarms in the school parking lot and it always made your eardrums pop lol I think it had a 350 big block efi switch to carb
Rite on with the editing and comedy here boys you guys together make a funny ass team and will go far!
Way better than zip ties lol jk peg!!
hhaha peg and jayco are one helluva team!
Damn! That was awesome!!
Cool truck, I own a couple old square body’s.
great clip from Peg
GREASY OL' JOO!! 🤣
after just putting a grill in my marquis, made me a little sad to see the grill get tapped lmao
YOUR LANUAGE IS THE SIGN OF SIMPLE MAN
What a Minty FKN old truck that is. 👌👌👌
ZipTie throttle cable gives it quicker response for sure Fkn 👌
ol timer speed trick for a carb hahhahah
That's how I've always had to do it that's how real men do it and tell me this why is every tow truck I've ever rode in sound exactly like that
Those brand used are barely even dry rotted. That’s how you know it’s good. You don’t need to worry about safety.
Slap about as much undercoat oil on there as you can, then double that. What a treat this old chev
gotta save on it somehow from NY taking it with all the salt
That steel deck tilt is heavy but you can beat the hell out of it way more than an aluminum one.
Those big tires will leak right out the side if they're dryrotted - ask me how I know.
No fan is going to be an issue...
My friend down in Mohawk had one like this and the biggest issue with it was it leaked hydraulic fluid like a bastard.
If you need another parts truck I have a '93 GMC 3500 dually you could drive home. Not that far away maybe an hour. I used it to haul a few cars off the hill in Mohawk. But it's a POS.
i will keep this in mind fella
@@CompleteToiletGarage Best thing about it is the NV4500 5-speed in it. Worst thing about it, I had to get a floor mat and put it down along the left side of the floor, or it would throw a mist of water in off the tires through a little gap in the floor, if the road was wet.
I think you need to pull that little Small Block back out of it and put a Nice Big Block in it.
When buddy goes to finger bang the tire divet and you can literally hear the buttholes pucker! Great fucking movie guys!
hahahaha they did!
Good job hope to see the axle swap like to see how old that how are you do it
“Your an asshole “ I think that’s a complement!
hahhahah yeeeepp!
Keep it up please. Great work. Those other non 1 legged revie and drive channels have gone limp wristed. Not you guys. Full on poundtown.
Should of put the headers on while the engine was up in the air at a 45 degree angle. It should have just went in and then tighten the mounts.
z bar is in the way on the drivers side.the header wasnt designed to clear it
Outstanding
absolutely mint boys
Hell yea toilet time!!
Just as I was starting to get DTs
they showed me a commercial for a electric gmc denali during this , youtube doesn't get it.
Define little rusty in upstate NY. Them tires " free-range road gators ". Let me tell you what when the inside dual tire blows it'll take the outside one out too on the way out the door . Ask me how I know. Oh don't call your so called friends that own have 24 towing that don't answer their phone . So iron wheeling it is . # 27 miles to home on two steel wheels. Welcome to pottery class . Tornado of sparks. Faster you go the farther firenado went. 50 mph is good it's fine. Mud flap on right was angle cut for custom deflection!!!
shes custom!
I've driven worse. One Suburban had no rocker panel left at all when I parked it
Not the first pond water tree fitty I saw ....
they love it!
Dude I know this sounds like some uppity shit but the Eastwood brake line tool is worth every penny. Course you can’t really use it except in a vise but perfect every time. Brake lines were a pain in the ass until I got this. It’s Chinese and you can find the same thing like $20 cheaper without the Eastwood name. Tried like 5 of those stupid little clamp kits first including OTC and they can all go fuck themselves I haven’t even given them to my brother second hand because I like him.
Although some might find it offensive I like hearing it straight from the horse's mouth uncensored tell it how you feel it! This politically correct I have to watch my words so I don't offend Society we live in because several people of the people our spineless weak don't have a backbone and want to cry over anything and everything. If you didn't win you don't get a trophy!
Hell yeah love the fuckery
10:10 mark
Is the bleeder screw on the bottom of new caliper?
hahah nope
Good video kid. I look forward to seeing the axle swaps and diesel swap.
Yes
Absolutely
Wheezing harder then a fat kid and a Jane Fonda workout. Or peg watching Baywatch
Awesome
7.3 idi in slave lake is air cooled hauled a van and a truck to da dump
Other than an old small block the only other motor that can do that is 3hundie 6 the one on the car crusher I used to run just thrived off of abuse in neglect that thing would just run off bad gas and used oil because it leaks so bad I drain it out of a car and had more and I'm not even a ford guy you just couldn't kill it lmfbo. Any great vidjayo ya minty FAQ! 👌
ya those 300's were damn fine units!
Are you up in NY? I hauled home a 85 GMC tow truck. I've got it all operating and now I'm working on a 4x4 conversion for it. I've been looking for a rollback forever. You got a nice hauler project going on.
If you're going to use it, which is what it's for, right?... I'd pop in a 5.9 Cummins from around 96-2004. You cannot beat the low rpm torque and high MPG.
I have a 2004.5 dually and it gets me 18-24ish MPG loaded or not it doesn't give a damn and 18-20 MPG at least!!.. all day every day.
You don't need to turn it up. Stock 100% she'll do all you ever want.
I'm still planning on finding one like yours. I'll be doing an oldie body swap, squarebody frame, and 5.9 for the win.
@24:45 check out that sassy shirt
Put a 12valve in it. Lol
Fuckin a bud!
its funny he says the younger generation has no ambition yet he doesnt even have the abition to take pride in his own work
there is a difference between getting a pile of shit home, and actually working on it. You have 3 days in 90 plus degree sun with no shade and i'd like to see what work comes from it. That said this thing is getting a huge overhaul
Pride? We all seen the rainbow flags, pride litteraly means your gay. Your comments will be forwarded to- completely open closet channel, and im doing a whip around to pick you up a packet of pride pants, better known as depends, you know, for when your arse leaks shit cause you done broken it.
@@CompleteToiletGarage i guess they want you to do a complete body off resto in the fuckin parking lot!
Just call us Canadians "frost backs" we don't care
Ricky and Julian working on a Shitmobile!!!
Where the FUCK is your merch?
Sh!t🤣 the crew only got one shirt. We have to rotate who shares em.
hahah one of these days fella
Pull timing out it will cool down
already put a light on it... shes fuckkked
Make a truck boat truck
Wish i had a buddy like the Jew. FFS, fella that has no knowledge and is willing to work would even be nice
Its a bi engine blazer 5:05
are you just assuming? hahahahha
You must be kin to Peg
Sadly from 2030 on all combustion cars including classics will be banned
from public streets in entire EU and Scandinavia :-( In Germany the
Green Peoples Party gave order to shorten fuel supply from 2025 on by
reducing all conventional fuel stations to only one state operated
central gas station per city or county. Now they even want to slow down
all the gas pumps from 20 litre per minute to 2 litre per minute...From
2027 on in the EU certain car spare parts will be banned too....as
exhaust systems, turbo chargers and even some engine and gearbox
oils...California and New York will do the same from 2027 on.... So no
investments should be done in oil burning cars any longer....They even
created a new kind of crime here, called emissions and smoke crime!
Should have ls swapped it
it was considered
@@CompleteToiletGarage it would have more power and torque won't have to rev so high ls would be awesome in that old truck put that turd tree fiddy on the hanging tree and let it flop till it dies
First time coming across the channel. Sound like a bad AVE knockoff, or a cringy 13 year old with all the f bombs.
You come out of that with AVE. 🤣. Should hear Wes’s mouth in person. This is him censoring himself!
Fah fahks sake man.
For future reference, a sheet of tempered or hardened ⅛" wood panel makes wheelin engine hoists and tranny jacks in the dirt a breeze lol
Who the fuck can afford ply wood these days with Brandon’s build back broker plan in place???
@@Hard_Right its like $12 for a sheet and itll last years of heavy abuse lol
@@Hard_Right he better get a sheet or 2 while its still cheap though!
"What the fuck didjew gimme into?"
... that's an *automatic* like... XD
You dont need to worry about the dry rot in the tires if they hold air youre good.... gonna need to find yourself one of em er 8.1 vortecs for that unit or a sassy pants 12 valve
now wtf you planin on doin with that hd3500? is that motor any good still? fuck i cant wait im sure your plans ull be a treat