Це відео не доступне.
Перепрошуємо.
Bios Settings 7950x3D 7800x3D [Gigabyte Aorus Elite Ax x670]
Вставка
- Опубліковано 14 сер 2024
- Click on Settings in Video - Quality - Advanced - 2160p60 or HIGHEST QUALITY!! ENJOY!!!!!! :)
Radeon xfx merc 310 7900 xtx
Ryzen 7950x3D (7800x3d)
M.B Aorus Elite Ax x670
EVGA CLCx 360mm
DDR5 6000 ram
1440p 360hz 27"monitor
azeron game pad (Mix of controller and keyboard)
razer viper 8khz mouse (the lowest Latency and smoothest)
Soundcore VR P10 wireless gaming earbuds (best for position and foot steps direction!)
* No Sound EQ needed*
00:00 intro
00:15 Bios Settings
10:11 Re size Bar off
10:52 Re size Bar on
![Bios Settings 7950x3D 7800x3D [Asus Rog Strix B650E-F]](http://i.ytimg.com/vi/kqAsNB5xCVI/mqdefault.jpg)
![Bios Settings 7950x3D 7800x3D [Asus Rog Strix B650E-F]](/img/tr.png)
READ BEFORE DOING
If the pc doesn't boot up after applying settings, RESET BIOS BY REMOVING CMOS BATTERY OR PRESSING THE BUTTON THAT RESETS BIOS, Leave cpu clock control at 100.00 not 103.00
make sure you are only running 2 ddr5 ram sticks and not 4 to achieve high speeds.
If you have any questions, feel free to ask and I'll help the best I can
what is the number of curve 7?
@@S.KRISHERif I’m not mistaken it should be 30
Tried this and suddenly window can’t retrieve my pin and computer takes long time to boot
I have no earthly idea what these settings I'm changing are doing but after booting into a game and trying it out everything worked out ok. I just wanted to see about undervolting or whatever that step was with the negative offsets. The temps seem low 52-58 depending on the game. Thanks for the tutorial.
Mateo_FPS, I ve got the Aorus B650 ELITE V2 but i cant find the DRAM_Voltage setting. Do you now where i can find it?
@byquadrix_1177 does the bios look the same as this one? You can always use the search setting in bios
Hi, I am using CPU Ryzen 9 7950x and MB GIGABYTE X670 GAMING Ram 32GB Bus 5200 GPU 6700 XT, so can I use your setup?
@pimmoo0210 yes, but pls read my pinned comment first before you start
I’ve got 7950x3d, rtx 4090, 5200mhz ram, can I just copy paste these settings?
Ok, one more stupid question :D When you say "Find your two best cores through Ryzen Master" -- how do you do that? Just do the curve optimizer thing that takes like 2 hours? Or is there some other test in Ryzen Master to use to find that? Thanks!!!
Just open ryzen master and somewhere it will show you the cores and it will have a star and a circle next to your two best cores
Why is IOMMU in NBIO Common Options on Auto, when you disabled it in another part of BIOS?
So… works great! I had to take it down to 100, but I’m wondering if trying 102 or 101 would make any noticeable difference in speed. I also used the standard negative 18 on each core. Might tinker with that too.
@MyWifeCallsMeBear it's not a noticeable difference, I have mine at 102 stable, I just wanted to push my hardware to it's max potential, you should try -30 on all your 3D cores and see if that works
Mine’s not a 3D, just a 7950x. But I did think of changing my 2 best cores to 20 and the rest to 25 like you suggested.
Hello, I have the same configuration as yours but my memories are limited. They are working at 3800.
I have 2X 24GB 7600 (ViperGaming Xtreme 5). I can't increase the frequency.
@evandropauli3925 you should manually change the frequency between 6000mhz-6400mhz thats a more stable frequency,
@@Mateo_FPS thanks for responding. At first it worked, but then it stopped calling and after a long time a message appeared. ''Boot Failure detected: Curent CPU:4205.8MHz / Current BCLK: 99.62MHz / Current Memory Speed: 3586.35MHz
@evandropauli3925 did you try it with core clock 100.00 or 103.00?
Will these same settings work with a 7950X (not 3D) and a Gigabyte x670 Aorus Elite AX? Thanks!
Yes, this works for all 7000 series, just follow my pinned comment before you start
Hi Mateo, I just order a computer with tis motherboard and a 7800x3D with DDR5 6000 ram from corsair. You had any problem with your pc? Some people are complaining about his combo...
Thank you !
@@strobelightstrobelight nope all good 👍 you should be fine
@@Mateo_FPS Thanks man, all the best
Why is there no vcore voltage setting in bios?
It should be the (vcore soc) its on auto you can switch it to Manuel set your voltage
I have never had experience with BIOS, but I have the same processor and motherboard as you, should I do everything like you? Do I understand correctly, this is all done to lower the CPU temperature without losing power?
@@stsndard copy everything except clock control leave at 100.00 and not 103.00, plz read my pinned comment as well, if you have any issues let know, this will lower Temps and allow you to boost higher, meaning more performance, what's your pc specs?
@@Mateo_FPS Ok thx, thats my build:
Кулер Deepcool AK620 Zero Dark
Оперативная память Kingston KF560C32RSAK2-32 32 Гб
Видеокарта ASUS RTX 4070 Ti Super TUF Gaming OC 16 Гб
Процессор AMD Ryzen 7 7800X3D OEM
SSD Kingston KC3000 SKC3000D/2048G
Материнская плата GIGABYTE X670 AORUS ELITE AX
Блок питания CORSAIR RM850e 850 Вт
@@stsndard what monitor are you using? And what's your main type of gaming?
@@Mateo_FPS I don't remember the exact diagonal of the monitor, but it is 1920x1080. I play mostly shooters, I assembled the computer on ryzen 7 7800x3d mostly for a game called Escape From Tarkov
@standardtd ok, you should be good then, I don't recommend doing this to people who play single player titles and gaming less than 240 hz, because this cpu handles that easily with out the need to change any bios settings
Is there a before and after of the benefit these changes make. Would it be roughly the same for a 7900x, thanks.
7900x or 7900x3D?
@@Mateo_FPS hi thanks for the quick reply 7900x
@pauldonohue4255 yeah it should work the same, most 7000 series cpus get a -30 curve on pbo
@@Mateo_FPS thanks for your time, I've got the -30 on cores and curious what all the other settings you changed are. If it's not a bother do you have any links to an explanation of what they do. I'm assuming I can't mess it up and it'll just refuse to post. I have two xmp profiles 1 and 4 but they both look the same.
@pauldonohue4255 I didn't bother explain because most people don't bother with long videos, maybe in the future I'll make one, and your xmp profiles try them both out and see which one is stable and which one gives you more performance
Ok, now a NEW problem. It rebooted after I changed the CPU clock control back to 100, but then Windows said there was a problem with my pin, so to create a new pin… but it doesn’t do nothing when I click make a new pin. What’s going on?
Did you reboot by removing cmos battery? This shouldn't do anything to your windows 10/11, this is just to increase cpu performance
Not sure what happened. I went back and restored the computer to an earlier back up point and it worked fine. So weird.
Quality video brother. I was a intel guy my entire life so have no clue what anything in the bios is doing (nevermind it being a new platform am5 and a x3d cpu lol) , but i think my normally my cpu is running at 5.1 or 5.2ghz and it tops out at 5500mhz. When i run 3dmark it will say 5500mhz in the report and even shows up on my liquid cooler screen that shows my gpu and cpu clocks etc.
I know it should go up to 5.7ghz but it never does, its always 5500mhz or 5.5ghz. I dont know if that is good or bad. It bad because i never see it hit 5.7ghz , but is it running at 5500 on the 3d vcache cores? Im definitely confused.
I have a gigabyte Aorus X670E Master motherboard, ryzen 9 7950X3D, trident ddr5 6000mhz,
In the bios all i did was enable the rams expo 1 profile, and set my cpu to a negative 30 offset. I did set memclk=infclk (i pulled those two words out of the air, its the same as in your video where we both set it to 2000mhz. Also set the same setting you did from normal to motherboard (has to do with the voltages) , resize bar on, integrated graphics set to off. Also set my top temp to 90. It never even gets close to thermals. I have really good airflow and a 360mm kraken.
I know nothing i said made sense, im writing it from memory and watched your video but havent been home yet to try out your settings.
But if it was just set to stock settings, is the gaming cores supposed to run at 4.2ghz boosting to 4 8ghz and if i was running a non game would the cpu cores boost up to 5.7ghz? Or do all the cores ramp up and just run at 4.2ghz? Its confusing just to understand whats going on. I know this isnt making sense typing this out. Lol i feel like i always have all 16 cores 32 threads running at 5500mhz constantly. Game or no game.
I still have sometimes annoying startup times even with a gen 5 m.2 drive. I do always have a 8F code on my motherboard which was supposed to be fixed since day 1 with all rhe bios uodates but my bios is up to date, chipset drivers , xbox gamebar, all up to date. When i run the little benchmark cpuz has and i compare it to a normal ryzen 9 7950 my single core performance loses by like 25pts.
Could you tell me a couple of benchmarks i could run to see if im anywhere close to whatsver scores your getting? Lol sorry for the long post, sitting on the train right now.
If you follow this video it should solve the majority of your concerns, so in order to boost the 3d cores (0-7) from 4.2 to 5.1 you have to undervolt to maintain the speed or you could turn off the power savings feature and it will run at fullspeed but it will bring down your performance, my games run about 5, and cores (8-15) can boost up to 5.7 but you have to undervolt so It can try to maintain a high speed, I'm a gamer so these cores I can care less for, my benchmarks are game based, I don't run cinebench or anything that's not game related
Process lasso is going to be your best friend for this cpu, because depending what cores you assign to your application it's going to determine your performance
my Settings for 7800x3d
cpu Boost clock Override Enabled (Negative)
Max Cpu Boost clock Override (-) 250
platform thermal throttle manual (88)
curve optimizer (All cores)
All Core curve optimizer sign (Negative)
All Core curve optimizer Magnitude (20)
I have max temp 80.9 CinebenchR23 after run 7 min
how do you figure out how to optimize this, so many settings that i don’t even know
@invade_ google and watch videos on explanations, and then tested them out myself, then I replicated the same settings on different computers and it worked as well
hey i make everything u say - but i still get the same fps in warzone - before the change and after all the same - why ?
@edenezri5259 whats your pc specs?
@@Mateo_FPS amd 78003xd
4090 gigabate
U HAVE IDEA?
@edenezri5259 monitor?
4k Oled 240hz
I have a similar mobo , Gigabtye X670E Pro X, all the same settings. Just my Ram is CL 30 6000mhz 30 36 36 76 . I believe you said in the video to set the curve to -18 ? That didnt work for me unfortunately.
@@Greddy87 what cpu? How many ram sticks? Did you leave the core clock 100.00
@Mateo_FPS 2 Sticks , 7800X3D & yea I'm not sure gonna have to double check. All I know is it crashed as me to revert back Bios
@Greddy87 you should be able to easily do -30 all core, and put core clock 100.00 not 103.00
@@Mateo_FPSSo I had it at 103 the last time. I did set to All core, negative -30, Expo enabled - CL 30 6000mhz. Ran a 3D mark bench, got 13000ish CPU score. Did 11000 on my 5800X3D, same undervolt settings
is the cpu clock control the platform thermal throttle limit?
@triyo1089 no, the thermal throttle limit will be where the curve optimizer settings are at, if you are doing the clock control just leave it at 100.00
@@Mateo_FPS for sure, is mostly everything other than pbo base?
Just did mostly you did with clock control at 100 hoping it boots, it worked but my ram speed dropped down to 3000 mt/s from 6000. Well actually im confused bc nzxt states 3000mhz and then task manager stats 6000mt/s i think nzxt just confused me sorry
@triyo1089 if it says it on task manager you are good
Please don’t delete this video lol
I have a 7600 should i change the settings or no?
Yes, maximize your cpu performance!...just keep your core clock at 100.00 not 103.00
So i tried this on my gigabyte b650 aorus elite ax ice with 100 BCLK and negative 18 per core and then i tried -30 on all cores and it boots but it takes 85.2 seconds according to task manager. This cant be right, cant it?
If you care about boot times, enable memory context restore
I did that.
Disregard that. Where it says TSME, mine says auto but i also have TPM right below TSME and that is on auto. Can I leave that on auto?@Mateo_FPS
@sellecksprodigy just leave on auto , this doesn't effect performance
Would these setting be the same with a b650 board?
Yeah, just don't do the asynchronous mode, leave it at 100.00
What options (and where to find them) do I need to use for RAM overclocking?
It's in tweaker, ddr5 section watch from 2:53
@@Mateo_FPShi! Ty for getting abck so quickly! I saw that u enabled expo1, I also did that to get to 5600mhz, my question is what would I have to do if I wanted to get it to, lets say, 5800mhz
@Lowgravity56 the easiest solution and less of a headache would buy better ram, 5600mhz is a oc that's stable anything higher is going to cause instability and system crashes will occur, if you want better ram, you want to look for cl30 or cl32 and speed of 6000-6400mhz oc profile from manufacturer, but you also have to confirm your mobo supports those speeds, 6000mhz is standard for ddr5
@@Mateo_FPS ok I understand! Ty for the answer and the time!
Why did u disabled usb configuration don’t that pose be for my controller , mouse , keyboard ?
What part of the video did you see that? If I'm not mistaken I didn't turn those off
If you are referring to legacy usb support, it's for older usb/mouse/keyboards, I doubt you are using older equipment if you are using a ddr5 motherboard, but if you had an older usb with files, then you will need to turn this on to access it if not this is just a useless option
Ohhhh noo I was just wondering bro I disabled it like u did everything still works I’m frying on call of duty now !❤😂
Uhm mine does not want to boot anymore with these settings. B650 elite aorus 1.2, 7800x3d
Reset bios to default by removing the cmos battery or press the button that resets bios, redo the settings but leave asynchronous mode at 100.00
Pc specs?
@@Mateo_FPS 78003dx, 32gb ram aorus, b650 aorus elite x rev 1.2, aorus waterfirxe ii cooler 240
@GodfreyJMassa is your ram 16gb x 2 or 8gb x 4? I didn't mention this on the video but some people have 4 ram sticks instead of 2 and that has been an issue
@@Mateo_FPS mine is 2 x 16gb ddr5 ram
Can this settings be use on b650 elite ax?
Yes, just keep core clock to 100.00 and read my pinned comment before you try
hi, ive just bought a 4090 build with the 7950x3d and the GIGABYTE X670E AORUS MASTER motherboard... is this video the same for that motherboard? ive had problems with what i should put on in bios aswell as the fans on both the case and gpu dont spin... im so clueless haha
Should be the same just make sure update bios,and leave core clock to 100.00 read my pinned comment
@@Mateo_FPS wdym update bios? like update once a while or?
@cityofeverything check your bios version and then go to manufactures website and see if their is an update for your mobo bios
@@Mateo_FPS what do u mean by "make sure you are only running 2 ddr5 ram sticks and not 4 to achieve high speeds"
@@cityofeverything how many ram sticks are on your pc? 2 or 4?
what is the number of curve 7?
You should do all core -30, I have different numbers because I stress tested each core and those are the numbers I got, every cpu will be different when you do per core
My friend I did everything from your video and the responsiveness at the call of duty to my controller it was magic but I disable the Sam from bios after 3 days and the responsiveness lost I enable Sam again but the responsiveness didn’t change again.and I try to figure out what is the problem
Reset bios re-do everything again, see if that solves the problem
Do you suggest a program that can measure the input lag of controller?
@@dimitriskaragiannis8689 what kind of controller do you use? Some controllers you can oc to 1000 polling rate and that's about the best you can do
@@Mateo_FPSsony edge
@@dimitriskaragiannis8689 ua-cam.com/video/7ufKu2pMkw4/v-deo.htmlsi=fdjHGfaFHW1TNcVo
Follow this video to oc your controller
I now have no display... tripled checked every setting before moving to the next section
Check my pinned comment for trouble shoot, and if you still have issues let me know, what's your pc specs?
@@Mateo_FPS Really appreciate the message! I found a cmos video before I saw your message.
7800x3d
@@Mateo_FPS must have been the cpu clock control
@Mateo_FPS I guess I also didn't read the title fully, I typed in b650 elite ax and this was one of the first videos. Not sure if that would change much.
@Tyler.7 these settings apply to all 7000 series cpus, some settings are going to vary by mobo
Does asynchronous mode mean cpu clock control?
@@GigiGolanu yeah
Thanks for the response. For the curve optimizer do I copy your exact numbers 0-7 or 18 for each one 0-7?
@@GigiGolanu what cpu do you have?
7950x3d
@@GigiGolanu try -30 cores 0-7, see if that works, if it doesn't boot up, Re do the settings and bring the curve down to -28
How do I check if my ram is fully being utilized
The speed? Or actual utilization?
@@Mateo_FPS This is my ram Gigabyte AORUS Memory ARS32G60D5R (DDR5 32GB (2x16GB) 6000MHz) When i was in bios it was defaulted to 4800
so to answer your question idk, i just want to make sure that im using the rams full capability which is 6000mhz.
@AnInsaneZombie idk if you figured it out already but if you open task manager under memory you should see the speed of your ram
Ok thank you
Can i use these setting for X670E aorus Pro X?
Yes, just leave asynchronous/core clock to 100.00, and you should be good, make sure you are also only using 2 ram sticks to get high speeds
@@Mateo_FPS sweet thank you will do
Is it also fine for the x670e aorus master ?
@@iYouVee yeah, just make sure you leave cpu clock control at 100.00
I have R5 7600x, does it work the same?
Yes, just leave asynchronous mode on 100.00
@@Mateo_FPSwhat’s that name on bios?
@@Vakirialam cpu clock control
@@Mateo_FPS after this my wifi conectic work very bad, do you know why?
@@Mateo_FPS i mean after optimization on bios
Failed boot up if bclk is above 100
Leave it at 100.00
@@Mateo_FPS but how did you made it 103😦
@STRELITZIA5202 honestly I don't even know either but with 7900xtx I can do 103 but with 4090 I can do 102
My pc also crashed after applying memory settings
Try it again but leave asynchronous mode on 100.00 and see if it works
Can confirm pc does not boot now that I put these settings on
Was it working before with these settings or you did these settings and it didn't boot up?
@@Mateo_FPS I fixed it. This tutorial is amazing I love you
@@Ithinkso11 glad it helped
@@Mateo_FPS glad you were conceived honestly this shit is amazing
So I tried all your settings and upon saving and exiting the bios , I got the led VGA failure light turn on ,on my motherboard. My machine is booting into windows because the color theme I have set for all my fans etc are setup and eventually everything syncs up (keyboard, fans, memory, motherboard etc) except my video card. GeForce does light up, but it's not outputting any display and the lights should be green to match everything else. My kraken cooler small led screen shows my cpu speed which is 5300 with temps almost 20 degrees higher then they were with Just my negative 30 offset on all cores. (That negative 30 undervolt idled around 28degrees and would run at 5500mhz.
I've tried everything I have no idea why my gpu just isn't displaying anything. (It's also weird that it's lighting up so it's getting power, but the temp reader on the kraken is saying 0 degrees for some reason.
I think im going to have to create a bios drive and flash the bios and hope that allows me to atleast get back into the bios.
I have a rtx3080ti I could put it there to see if that will get me back into my bios , I'm done for the night trying. I'm just getting frustrated now. Will need to try the new gpu tomorrow after I get some sleep. Hopefully my graphics card isn't fried , which it shouldn't be, I didn't touch anything to do with in the bios.
I can be a lot of things, try resetting the bios by removing cmos battery, try different cable
@Mateo_FPS , it's just a pain in the ass removing my video card , then the battery then putting them both back in, hoping I can get into the bios etc. My bios isn't even on the website for some reason. I am using f21a or something that was released this month. I didn't see it on the website last night
@JerseyJohnnysElectronicsGaming you should be able to get into the bios if you connect the hdmi to the mobo
@Mateo_FPS , tried that but I disabled onboard graphics . The cpu is running super hot at 5325mhz 41 degrees . My.vga light on the mb is lit and I have a code A0 which is a successful boot im pretty sure. I think it's booting into windows because like I said even my wireless keyboard color profile loads up which is controlled by a program on my taskbar, I see the video cards fans on and GeForce does light up , but it's not the correct color and it's not communicating with the system which is why my kraken isn't showing any of the gpu temps or speed. I'm gonna have to open up the case and maybe see if I can short out the cmos with a screw driver . If not I'm gonna have to remove the video card, open up the heat shields on my MB and remove the battery. Such a pain in the ass.
@@JerseyJohnnysElectronicsGaming I think your mobo might have a button you can press to reset the cmos, either in the back of your pc or somewhere on the mobo, mine has a reset button close to the bottom of mobo so I can use a long stick and press it to reset so I don't have to remove anything
So i have everthing same like you i try it and my pc crasht 👍🏼
1 value must be off somewhere, if it crashed, it would be asynchronous mode,ddr5 oc,undervolt, what's ur mobo,ddr ram, cpu? I built to comps two weeks ago same settings no issues different mobo as well
You need to reduce the bclk. Try 102mhz instead of 103.
Try just change CPU Clock Control to Auto or test other values
Same , and my pc won't boot , no signal
You downloaded the wrong version of W11, you need to install 23h2
If you run windows stock, yes this is true but if you know how to optimize windows it doesn't matter
@evolutionTR can you send me a link of someone running this and that shows their benchmark in mw3 so I can compare
@@evolutionTRBoth are awful and reports have shown revios to be untrustworthy, 🤷♂️.
Is do you have discord? I am having issues with my system and maybe you can help me out I’m getting really bad lows and I’m not getting near that on average but I’ve tried to copy your settings we just have different motherboards so I can’t copy them exactly
Most mobos have the same settings just different places, so you would have to look for the settings, but your main thing to change would be asynchronous, expo/xmp profile, pbo with curb optimizer, if you still have trouble let me know, and we can get on discord later on
I couldn’t find the curb optimizer in the bios I have a MSI b650 Tomahawk wifi
@@tylermartin6929 it should be under pbo settings advance
@@Mateo_FPSis the curb optimizer the same for every 7800x3d or does it depend on other specs like ram or mobo
@juriestajilo9693 it's different for every 7800x3d, but with these settings should be a typical working oc/uv, if you want a per core uv I can show you how as well