That trimmer head on your model is a quick feed system. There is no need to remove the cap and go through what you just did. Just line up the arrows and holes, feed the line to equal lengths on both sides and use the knob on top to pull the line in with about 6 inches left and you are all set!!
His method is way easier. That cap gets stuck and is a pain in the butt and doesn't always catch. The method shown in this video saved me time and frustration.
Thank you so much for making this video. I was getting so frustrated with this. I threw the spool across my porch twice and almost gave up. This video saved my blood pressure 😂
This was almost helpful. More details please. It’s like watching shady tree mechanic. After the break we will install the alternator and when they came back the alternator was already back in So you don’t see how to install the alternator for example.
Could you please elaborate on what else you would like to see? I feel like it was pretty detailed, just cut out unnecessary footage and tried to get straight to the point because most people don’t want to sit and watch a 20 minute video of someone restringing a weedeater
@@TheColeFix well maybe your hand gets in the way. Like I see you thread the like into the hole and wrap it. But could not see what you did with the end of the line. Then how you got it into the other doodad. Maybe a little slower might help. It was good other wise. Just felt like I missed something or went fast to try and do it at same time. First time with a weed wacker and being “independent”. I appreciate the help. I truly do.
I’m actually trying to fix my friends right now, it’s either the drive shaft our clutch same brand as yours. Can you make a video for replacing those our taking the weeder apart a little I’m a little afraid of breaking something on here
That trimmer head on your model is a quick feed system. There is no need to remove the cap and go through what you just did. Just line up the arrows and holes, feed the line to equal lengths on both sides and use the knob on top to pull the line in with about 6 inches left and you are all set!!
His method is way easier. That cap gets stuck and is a pain in the butt and doesn't always catch. The method shown in this video saved me time and frustration.
The way this trimmer head works sucks so bad and the lines does f feed properly. Probably the biggest pos I have ever bought.
Thank you so much for making this video. I was getting so frustrated with this. I threw the spool across my porch twice and almost gave up. This video saved my blood pressure 😂
By far best weedwacker I’ve had
can't see the video because of the dumb blue square on the screen.
same here, video is blocked because UA-cam says i have ad blockers, which i do not.
This was almost helpful. More details please. It’s like watching shady tree mechanic. After the break we will install the alternator and when they came back the alternator was already back in So you don’t see how to install the alternator for example.
Could you please elaborate on what else you would like to see? I feel like it was pretty detailed, just cut out unnecessary footage and tried to get straight to the point because most people don’t want to sit and watch a 20 minute video of someone restringing a weedeater
@@TheColeFix well maybe your hand gets in the way. Like I see you thread the like into the hole and wrap it. But could not see what you did with the end of the line. Then how you got it into the other doodad. Maybe a little slower might help. It was good other wise. Just felt like I missed something or went fast to try and do it at same time. First time with a weed wacker and being “independent”. I appreciate the help. I truly do.
I’m actually trying to fix my friends right now, it’s either the drive shaft our clutch same brand as yours. Can you make a video for replacing those our taking the weeder apart a little I’m a little afraid of breaking something on here
The tabs won't pop up the top
literally bro shit is so aggirvating
Thanks Man, putting it on by hand is so easy!
The heavier string works great.