I BOUGHT AN OLD BOAT FOR $1,000 | FISHING BOAT RESTORATION

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 531

  • @timroberts69
    @timroberts69 Рік тому +15

    It's awesome to see a father and son working hard together and sharing valuable time together. What a steal for $2000. I felt bummed for you when the stern drive went.

  • @drodriguez7249
    @drodriguez7249 9 місяців тому +50

    The best part of this renovation is tht you had tht quality time with your dad and family to accomplish the dream of the boat. A lot of people think tht maintaining a boat and renovation is easy but it’s not. Great make over and hands up for the finish. 👍👏🙌

  • @sgray562
    @sgray562 Рік тому +15

    Your pops helping you out with this project, just loving to be there is what I dream of as a father to a little one. I can only pray that I'm able to do the same for my boy sometime down the road. Appreciate how good you got it bro bro.

  • @thomastirolflorida5363
    @thomastirolflorida5363 Рік тому +15

    glad to see young people still loving the American way.
    Me and my dad fishing.....priceless.

  • @lrrcew
    @lrrcew Місяць тому +2

    Love seeing old boats restored into a new lofe. Great work!

  • @theneck5157
    @theneck5157 9 місяців тому +3

    Great video !! I don’t know why it popped up on my feed but I’m glad it did .. watching a father and son enjoy time together is what we need more in America … I imagine you guys hunt together and fish but I’m sure he loved this project because you got to work hand in hand with him and he was able to see his son work like a man lol the man he created, he must be very proud … god bless and keep the videos coming … I will sub and watch your other videos …

  • @gatorflea2788
    @gatorflea2788 Рік тому +130

    Make sure that the engine compartment exhaust fans work and let them run a minute before you start the engine ! Gas fumes RIP !

  • @michaelmarsh9100
    @michaelmarsh9100 Рік тому +15

    You all have inspired me to continue my own boat project. I have learned so much from watching this video. Thanks for the tutorials. Your family is awesome!!! Excellent job!!!

  • @DArynBDeMoss
    @DArynBDeMoss 5 місяців тому +1

    Aside from the work that ThatBoatGuy does, this was one of the best boat resto vids I’ve seen. The attention to detail and planning that went into this to make a boat work for you two is amazing. Gets me excited to restore a boat with my son lol

  • @tubeguiller007
    @tubeguiller007 6 місяців тому +1

    Beautiful restoration, thanks for sharing. Thanks for making everyone aware that if you put some effort you make everything shine. I wish you the best times of your lives. Thank you.

  • @beckydupree8794
    @beckydupree8794 9 місяців тому +3

    What a transformation. I really enjoyed it.

  • @christophermorath6866
    @christophermorath6866 Рік тому +12

    Outstanding work! You and your Dad and family are quite the talented crew. You guys had a vision and skills to make it happen. The rebirth of this boat is a thing of beauty. Tight lines!

    • @gethushin
      @gethushin  Рік тому +2

      Appreciate it man! It was definitely fun!

  • @richardclark4610
    @richardclark4610 Рік тому +1

    $1000 was a steal. The engine & outdrive should be worth more than that alone! Boat has LOTS of possibilities for sure.

  • @himhim3344
    @himhim3344 8 місяців тому +3

    I did the same thing with my dad when I was 19. We went in halfs on an old 18ft Thompson for $1300. Bought it at the end September and spent the fall removing the seats/cushions, carpet, engine cover and any damaged sections of the floor. No garage so we wrapped it for winter. Spent the winter picking out and buying new seating, carpet and other supplies. My dad made a new engine cover. I was working at a lumber yard so I got a good discount on the building supplies. Come spring we started on the flooring and covered it with a layer of fiberglass. Carpet, seats, new cushions for the bow and a new piece of tempered glass for the walk through windshield.
    Over the years we've made other upgrades and repairs but have always split the costs 50/50.
    It's not always about the money. Sometimes it's about spending time with someone and them passing on their knowledge. 19 years later and he's 73 but we still use it every season.

  • @michaelhester6461
    @michaelhester6461 6 місяців тому

    Really cool project! Especially since you’re doing it with your dad. You’ll both remember this experience forever.

  • @craigjones6557
    @craigjones6557 Рік тому +1

    Wow what a transformation. Is a great thing working alongside your father and family, treasure those moments

  • @williamsealy8781
    @williamsealy8781 7 місяців тому +1

    I dig this. Im restoring a 1966 all Aluminum 18' cabin cruiser. It looks haggard cosmetically but i put a new Yamaha on it and it doesnt leak a drop. Fun on the water.
    Id put a 100+ watt solar panel between your rod holder and light bar to extend battery life.

  • @chrischurch4551
    @chrischurch4551 7 місяців тому +3

    Awesome. I can tell your dad is genuinely super excited.

  • @nickanderson1794
    @nickanderson1794 Рік тому +2

    I like the hunting side of things more, but it's really nice to change it up and see the fishing stuff, too. Love the boat and want to see it in action.

  • @willberk2920
    @willberk2920 Рік тому +1

    What a wonderful video, I love seeing you and your dad on this project. It is such an inspiration. This was somewhat of an emotional ride for me because I no longer have my dad. Cherish one another while you have the time, beautiful family. Thank you.

  • @mikethedesertrat
    @mikethedesertrat 7 місяців тому +1

    I'm about to start a complete rebuild of 21' 1975 Reinell cuddy. Thanks for sharing your journey. I plan to share mine as well.

  • @deborahwack-th1kd
    @deborahwack-th1kd Рік тому

    Looks Great. I bought a 1979 Slick in ‘79 and loved it for more than 20 yrs.

  • @kevinjohnson7330
    @kevinjohnson7330 Рік тому +1

    Very nice restoration. On hulls like this with outdated stern drives I really like modifying them by removing the drive system, installing an outboard bracket, and cover ring to an outboard motor.

    • @gethushin
      @gethushin  Рік тому

      Want to do this bad. Just need someone with experience

  • @thomasroy5833
    @thomasroy5833 Рік тому

    My buddy had exact same boat 20 years ago on Lake Superior(Duluth Mn). We did wreck diving and fishing out on Isle Royale. We trolled many many hours. I recall heavy weather and monster waves and huge lake trout! The old slick did just fine even loaded with gear and provisions for a week. Only complaint is low cabin roof. Many bumps on head(as you know). He developed outdrive problems with the OMC and couldnt find parts. He gave the boat to his nephew. Keep your eye out for another spare. He now has a c-dory with twin honda 40s. Another nice craft! You did a great restore. Enjoy.

  • @danle-xp9iz
    @danle-xp9iz 8 місяців тому +1

    What a beautiful job you and your family have done! Watching your videos to get some ideas for my next boat project. Thank you for your videos.

  • @johnlarocco2661
    @johnlarocco2661 Рік тому

    Super restoration. Good times with your Dad that will be with you a life time.

  • @PalmSandsRanch
    @PalmSandsRanch Рік тому +1

    Sweet build!! Love that you repurposed that awesome cuddy, I’ve fished a lot of Utah lakes, they are epic. Raised in Oregon fishing across the state, now live in SW Texas and have been fishing 3 times in 10 years 🥺. Pretty pathetic, I live 40 minutes from Lake Amistad and have never fished it. Your video has lit that fire under me arse! Thanks for taking us along your journey!! Rip that Lip!!

  • @robertlittle8672
    @robertlittle8672 Рік тому +2

    Love what you guys did,totally incredible, I did a similar rebuild, the only difference was,I removed the I/O completely, glassed in a plug into the transom from both sides and added an Armstrong bracket, and added a 300hp outboard,and then had room for an additional fuel tank. Just didn't want to trust the I/O offshore. Great job,you should open up your own shop!! You definitely have the skills!!!

    • @gethushin
      @gethushin  Рік тому

      Would love to pick your brain about the geometry and technicalities of doing the conversion. Really want to do one.

  • @paulhaldeman3309
    @paulhaldeman3309 10 місяців тому

    Fantastic project, fantastic filming and naration, what a great dad and family. I run a 17' Boston Whaler in Jordanelle, Deer Creek, Lake Powell, Utah Lake, Bear Lake, San Diego off shore etc. I had to forfit having a cuddy space but decided on Center Console. I installed the same Garmin Echo that you did in July of 2023. Its incredible. I also have a 24' Maxum open bow with a 7.4L MPI with dual counter prop Bravo 3 outdrive. In my senior age I needed something smaller. I live in South Jordan. I'll be looking for you and this amazing restored Sleekcraft and wave you down.

  • @sebastianlohmann7544
    @sebastianlohmann7544 Рік тому

    What a great looking boat! and nothing like a son and pop build! Makes me really miss my old boats.

  • @sssrp80
    @sssrp80 Рік тому +1

    Those body shop skills came in handy for all that masking. I have used raptor liner in and out of some of my builds. It's awesome stuff.

  • @speerzy11
    @speerzy11 Рік тому +1

    I don't own a boat, I don't fish, but I just watched the full hour video with the UA-cam recommendation, haha. Awesome work you and your Dad (and other family members) did restoring that boat. Cheers from Canada.

  • @jasonfisher281
    @jasonfisher281 Рік тому +6

    Nice work Matt! Looks like a fun project! And to work on with your dad “priceless”!

  • @scottgarbs7761
    @scottgarbs7761 Рік тому +23

    That is a remarkable restoration. Congratulations to you all.

  • @papatrt
    @papatrt Рік тому +9

    very admirable renovation and upgrade of a family memory making project of love!

  • @JMBurke
    @JMBurke Рік тому

    cool rebuild. I love that you guys put the new prop on backwards and had to flip your gears to make it work. So awesome.

  • @jerrysmith7166
    @jerrysmith7166 5 місяців тому

    Awesome restoration, love these old boats. Older boats are the best in my opinion, love it.

  • @clanggedin
    @clanggedin Рік тому

    Very cool restore. My father bought a cutty cab 20+ years ago and it as never touched water as he was going to restore it. He got half way and then stopped. We tried working on it years ago and he said he wanted to do it himself, but it still sits. Now that his health is failing I think he may let us finish the restore on it so we can take him and my mother out. Thanks for the inspiration from one Utahn to another.

  • @kasnick71
    @kasnick71 Рік тому

    My neighbor had one in Detroit back in the 70's. I was really jealous as that is one fine boat.

  • @davidwills8803
    @davidwills8803 Рік тому

    Matt, awesome boat build. You have taken an old 1000.00 boat to the Supreme level. Cudos to you and your Dad

  • @MrBowNaxe
    @MrBowNaxe Рік тому +11

    What a great build Matt, you and your dad (and others) did an amazing job. Can't wait to see some Hush fish videos in the future.

  • @markbradley5989
    @markbradley5989 Рік тому +1

    Nice nice nice . Wow on the Transformation to an awesome fishing boat.
    Noticed the original OMC transom seal is still in place. Might want to think about replacing this seal at some point. When this seal fails it is never a pretty sight. Great job outfitting tackle and electronics.

  • @Park-cu3fb
    @Park-cu3fb Рік тому +2

    Thanks for posting you guys are my favorite UA-cam channel love hunting sheds and fishing

  • @flintmcmanly
    @flintmcmanly Рік тому

    What a cool project with your pop. Those are great memories that will live forever.

  • @stevematalone2512
    @stevematalone2512 2 місяці тому

    Come up awesome what a great looking boat plenty of good fishing trips to share with dad.

  • @jodyhoughton7341
    @jodyhoughton7341 Рік тому +21

    Never had a boat with down riggers. Maybe you could do a tutorial about how they work and why they are so helpful, and how they work? Great job! Beautiful!

    • @aidchristensen2000
      @aidchristensen2000 Рік тому

      down riggers are just strings with weights so you can troll at deeper depths without added weight. depending on the depth you add a certain weigh and your line goes through a clip at the bottom. fancy stuff

    • @mwatkins2464
      @mwatkins2464 Рік тому

      @@aidchristensen2000thanks, I always wondered why they were needed. Thanks for helping me understand 🇺🇸👍🙏

  • @PTRRanger951
    @PTRRanger951 Рік тому +1

    Amazing build. I just found your channel and now subscribed.
    On your rod holders. I would use the plastic grommets used for wiring and put them where you drilled. It would give a nice finish to it and prevent the drilled area from getting chipped or flaking when you put the rods in or out and prevent the rods from showing wear there too. They are going to bounce around a lot when on the water or trailering. They make all different sizes up to large ones you see in tables for running wires.
    Should also look at some LED strip lighting to put around the edges of the interior to light up the walkways or things on the floor at night. Would look pretty cool.
    Might also want to see if you can replace the dated halogen bulbs in the cabin lights with LED replacement bulbs to give a more modern glow and use less power.
    That is one sick looking boat and you guys should be proud of yourselves!

  • @bahamasking2063
    @bahamasking2063 Рік тому

    Y'all did a Beautiful job on restoring that boat. Really is a 2023 boat now. And that wrap is lovely.

  • @OutdoorsAllie
    @OutdoorsAllie Рік тому +1

    Loved watching this. Good work fellas!

  • @TizYaBoy
    @TizYaBoy Рік тому

    THIS is the boat restoration video that makes me never want to buy a new boat. Helluva job y’all did on it 🤙🏻

  • @signelengis
    @signelengis Рік тому +1

    Nice job guys. I'd do the whole side of the boat in that topo, but I am sure that is expensive. Nice touch on the painting the sterndrive as well.

  • @Alex420DT
    @Alex420DT Рік тому

    Getting ready to do a similar build, won't be for fishing but rather spending time with family and just enjoying the lake. Your build turned out beautiful. Thank you for sharing.

  • @juangranados7652
    @juangranados7652 8 місяців тому

    Thank you for the video. I hope you guys have a blast on this for many years to come!! God bless yall!

  • @seanstephens3896
    @seanstephens3896 Рік тому

    Need to get that out here on Willard bay for some Wipers when they’re boiling. You may only hook a five pounder but they fight like they’re 20 lbs. Glad to see your vision came true and the memories can begin. Another good time would be out on Flaming Gorge hooking a kokanee salmon.

  • @Utherden
    @Utherden 11 місяців тому

    Boy, you better be glad you got your daddy! Well done on the boat.

  • @ericisoda561
    @ericisoda561 Рік тому +1

    Great job on all the renovation details, etc. Not sure how your boat is vented in your engine bilge area to the front under your floors but I would suggest you look into getting a Carbon monoxide monitor that alarms for your front cabin especially if your child sleeps in the front.

  • @jpropst81
    @jpropst81 Рік тому

    Boat looks beautiful. Your 36v battery is pronounced epic at least that's what the company calls it! Keep up the great videos and we will keep watching!

  • @aaronschneider7064
    @aaronschneider7064 Рік тому +3

    Beautiful job on the boat build. Hope U and the family have some great times and make lots of good memories.

  • @GOM7273
    @GOM7273 Рік тому

    My Dad and I built my 1st boat and had a great time doing it together like you guys did.
    It is fun building or fixing up a boat . Looking forward to seeing you two in the future fishing and I bet your not done tweaking with the
    boat. It turned out great .

  • @Big4x4
    @Big4x4 Рік тому

    Great work! Only small tip I can suggest is when drilling holes through the gel coat should chamfer the holes or you will start to see cracks form

  • @Rockers1121
    @Rockers1121 8 місяців тому +1

    Cool equipment .. cool boat. I bet you were super excited getting that gear.

  • @bradleym.2008
    @bradleym.2008 Рік тому +3

    Y’all killed it!
    One of the best boat rebuilds I’ve ever seen

  • @mrnrjsr0658
    @mrnrjsr0658 Рік тому

    Really enjoyed this video from start to finish awesome build reconfiguring, upgrades and new features and improvements nice family participation. Thanks 😊

  • @tylerjackson1737
    @tylerjackson1737 Рік тому +1

    It’s time for some fishing challenges “das boat 3.0” hush style!! Awesome build video and I’m looking forward to seeing some great fishing content!

  • @brettferrin8482
    @brettferrin8482 Рік тому +1

    You can't put a price on the father and son time so that is priceless. I am curious now that you are done how much money you think you saved over a comparable boat if you were to buy one. What a project! Sounds like you had a lot of available resources that helped with the project. Tight lines! Hope to see you somewhere on a UT pond.

    • @gethushin
      @gethushin  Рік тому +1

      Definitely will never forget the bonding time. And I think all said and done I think we have a comparable boat as some modern cabin boats for about 30% of the price

  • @geraldfontain4652
    @geraldfontain4652 4 місяці тому

    WOW, YOU DID A WONDERFUL JOB WITH THE BOAT .

  • @captainwinky
    @captainwinky 10 місяців тому

    You guys all did a awesome job! Boat looks fantastic! Happy fishing!

  • @baronblansit
    @baronblansit Рік тому +1

    I would love to see some fishing videos on this boat.

  • @wayneguest9540
    @wayneguest9540 Рік тому +1

    Loved this video Matt. Please have more fishing content on this channel!

  • @jbennett9193
    @jbennett9193 Рік тому +1

    That's a big undertaking. Great job. There are lots of vintage boats around here in the Great Lakes region that could use a makeover like that. More fishing content would be great.

  • @braxtonlance8854
    @braxtonlance8854 Рік тому +3

    Outstanding. Way cool build, probably one of my favorite videos so far. So detailed and step by step.

    • @gethushin
      @gethushin  Рік тому +1

      Appreciate this comment!

  • @longstrangetrip3535
    @longstrangetrip3535 Рік тому

    You guys did a stellar job on that boat, it turned out beautiful! I love everything you did to it including the color scheme.

  • @williampesch3538
    @williampesch3538 Рік тому

    Love those old Slickcrafts. We still see them here in Michigan on the Great Lakes.

  • @mototurkey5289
    @mototurkey5289 Рік тому +2

    Excellent video of a great project with family and fishing partners! We’ll done! Get some fishing content and make note of anything you’d change. Tight lines!

  • @bobc4920
    @bobc4920 Рік тому

    Looks great Much more room. If that engine fails you consider a bracket and outboard Also keep a lookout for a fresh water cooling setup. One other thing research draining the cooling water in the winter if it freezes
    There should be some peacocks on the block you can use to drain.

  • @ecesarchavez
    @ecesarchavez Рік тому

    Great restomod wish more people restored older boat 👍🏼

  • @mm09291
    @mm09291 Рік тому +1

    What a great video Matt. I like things like this. I hope to get a small boat one of theses days. Glad that you guys are putting more fishing videos out when you are not out hunting.

  • @JohnSmith-bi1wc
    @JohnSmith-bi1wc Рік тому

    Take good care of your dad, absolute top lad!

  • @luchio0377
    @luchio0377 6 днів тому

    The Boat came out amazing!!! Well done 👍

  • @clintmurray3795
    @clintmurray3795 Рік тому +9

    This was really cool! I would be very interested in what a final cost would have been if everything was purchased.

    • @gethushin
      @gethushin  Рік тому +4

      Appreciate it! Definitely will have to add it up at some point!

  • @Batterybusters
    @Batterybusters Рік тому +2

    Great choice on the Epoch Battery those things are terrific love them

  • @ReelTimeCapt
    @ReelTimeCapt 7 місяців тому

    Nice job! I charted inshore out of VB, VA for 20 years on a 23 Parker walk around that I restored and setup similar. Enjoy!

  • @andyluikens8307
    @andyluikens8307 Рік тому +3

    Absolutely loved this video. Can’t wait to see some fishing videos with the new boat.

  • @stephensmith5317
    @stephensmith5317 Рік тому +1

    what a great find, the boat looks amazing. great videos, you have a great dad too. that loves to help.

  • @bxbmbr766
    @bxbmbr766 20 днів тому

    This was an awesome video full of detail and good explanations! Can’t wait what the future holds for this boat!

  • @Ghost_Reaper90
    @Ghost_Reaper90 7 місяців тому

    Such a nice looking boat, wish we had boats like this in the UK.

  • @jasonbishop1135
    @jasonbishop1135 Рік тому +1

    Incredible boat build! Very impressed with the before and after. Can't wait to see it in action! 🎣

  • @Sorensenoutdoors
    @Sorensenoutdoors Рік тому

    What an amazing build. Well done guys. Can’t wait for some fishing videos.

  • @imaner76
    @imaner76 Рік тому +1

    I really enjoyed this. Your hard work and pacing on this video really shows. Thanks for bringing us with you!

  • @johngorden2601
    @johngorden2601 11 днів тому +1

    Very good boat and nice job bro. Best regards from Borneo 😍👍

  • @alcidesjuarez6373
    @alcidesjuarez6373 Рік тому +1

    Wonderful work. Could you continue this video with catch and cook episode? Thank you for sharing this great project that I enjoyed so much!

  • @glennoack2916
    @glennoack2916 Рік тому +1

    Really cool came out awesome can't wait for some fishing videos out of it

  • @kellybikeco
    @kellybikeco Рік тому

    old boats are the best... nice build!

  • @BCHonea
    @BCHonea Рік тому

    Man, you did a great job on that old cudd. Looks great and you’ll looove fishing with it

  • @NW_Outdoorz
    @NW_Outdoorz Рік тому +1

    Love the before and after. Definitely a different watch from the Hush crew but love it!

  • @chadpitre5862
    @chadpitre5862 Рік тому

    Man you guys did an amazing job on that classy old boat love it…can’t wait to see y’all fishing videos

  • @MatthewsFabrication
    @MatthewsFabrication Рік тому +1

    Matt, Very Impressive build. So many awesome Upgrades & I can't wait to see you catching a ton of Kokanee this year with it.
    That Aqua Traction CNC cut & possibly Laser Engraved Hush Logo is Awesome.
    My son & I laughed a little when you said 3D printed.
    What a lot of work, with some frustrating, real life problems, especially that motor, ouch..., but looks like it's way Worth it & helps us all know we all go through problems, but to just keep pushing on to make our Dreams come True.
    Let's Go~!

    • @gethushin
      @gethushin  Рік тому +1

      Appreciate it man! And yes hahah definitely a lot of miss pronounced phrases in this vid 😂

    • @MatthewsFabrication
      @MatthewsFabrication Рік тому

      @gethushin No problem. I do the same... It must be a Matthew thing, 😁
      Fish Lake this Weekend, Get Some

  • @adamtedder1012
    @adamtedder1012 2 місяці тому

    You two are just like me and my son. We do the same stuff with our boats.

  • @mjkicks2518
    @mjkicks2518 Рік тому

    Lets gooo, this was super cool. Yes we need more vids on this gal. Sweet build and great way to bring what most throw away back to life.

  • @Junior-cy7lv
    @Junior-cy7lv 2 місяці тому

    It looks so good!
    You inspire me to do something similar!
    Great job on your boat!