How To Program Your Chamberlain Garage Door Opener. Super Easy!
Вставка
- Опубліковано 21 лип 2024
- How to program your Chamberlain garage door opener.
This video will help with the initial set up. Super easy!
THanks for watching!
PLease SUBSCRIBE!
/ mudblokey
~-~~-~~~-~~-~
Please watch: "CHI Model 2240 FLUSH Panel Garage Door"
• ➡CHI Model 2240 FLUSH ...
~-~~-~~~-~~-~ - Розваги
We installed a new opener last night. I wish I would have seen this before we tried to program it. It would have made things easier on me and my dad. Well done sir!
Thank you and you're welcome 😊!
That's my line. 😒
Wow. You saved me some dollars for a service call to a technician. Your second step about measuring the force of the opening and closing was the part I didn't know and was causing my issue. I have a Chamberlain B4505T. Even their manual didn't have that step! Thanks.😊😅
Thanks for the awesome feedback!
Thanks so much. My instructions had nothing about the fast flashing up and down buttons after setting up the travel settings. Ten minutes after watching your video it was working! I played with it for hours trying to get it to work using the instruction manual that came with it. Thanks again!
That's great news! I appreciate the awesome feedback 🙂.
I found the trick is to make the door so the rubber weather stripping at the bottoms barely touches the concrete. Then opener automatically allows the door to gracefully fall into place the last 2 in. Like a built in soft close feature. Use the arrow to slam in into its final resting spot will activate the safety feature when adjusting and ruin the adjustment process. Hope this helps!
Excellent pro tip! Thanks for posting. 👏🏼
Thank you. I learned from you to set my garage door in a minute. You save me a lot of time instead reading the thick instruction manual.
Denise ma
Awesome!!
Your welcome.
Watched a few other videos, and this is what i was looking for. Short, sweet, simple, and effective. 5 stars! Thank you for sharing! 🙏🏼
Glad to help! I appreciate the awesome feedback.
Awesome video! Before I watched this video the chain was way too loose, the bar was bowed from all of the pressure from the cable side, and the cable side was so tight It looked like the cable would cut your head off. I watched your video and it was 1,2,3 and everything worked perfect! You saved me a lot of grief!! Thank you so much for the video.
Brent Erwin
That's awesome bud! Good job in taking control of the situation.
Thanks for watching!
Thank you for this video, this thing was driving me nuts. Got it from a friend with no manual or info. Didn't know the pressure control either. Beautiful video!
Awesomeness !!
Thanks for watching.
Thanks, probably should have read the directions but I didn't and have no idea where they are now. It worked great for years then this happened . You completely saved me. Thanks again 😊
Glad to help 😊!
This video was awsome , my manual never mention how to bump the buttons (up/down) . Knowing this , made it so easy to adjust the door . Thank you , thank you ,thank you !
You're welcome 😊!
That was very helpful ! spent 2 days trying to figure why it's not working, even bought another unit thinking it's has some technical problem, thanks a lot!
Glad to help! Thanks for the comment.
To be honest I’m gonna give you some good credit on the emergency release rope and handle you are the first garage door installer that I seen who actually tied off correctly so please keep up the good work on doing that and if you have any access rope please just trim it burn and if you want or just leave it but the way you have it set up good job
Thank you Zackary!!
Happy New Year my friend.
This video saved me $150 to have a door company come out where I live..thank you so much
Glad to help!
Thank you! The manual for the 6753T DOES NOT mention the required force adjustment. The installers had no idea why the door would open, but not close. I've sent the installers links to your videos. Again. many thank!
I really appreciate the positive feedback! Thanks for the support.
ok....thank you very much...after 8 hours and 2 days it finally works. mysterious things happening in the garage. if it doesn't work double check everything. ..wires and all....somehow the wires got cut...must be a ghost...lol
project done. thx for help!
+Patrick Jordan
Glad it's up and running Pat!!
Worked well with my Chamberlain chain drive, I should be able to get my truck in the garage now thanks for the help!
You're welcome 😊!
Thank you!!! Dude I had no idea what I was doing 😅, you got rid of my headache!!! 👍👍👍
Thank you so much. Your video saved me from going over several videos to solve my garage door issue.
I appreciate the awesome feedback!
Thank you so much my garage door and motor were replaced a few months ago and randomly I started getting error messages for different things such as excessive closing and opening force, sometimes cable tension failure because the garage refused to stay closed without the light blinking. It would go all the way down then immediately back up. I had to manually close it because I had no idea what the cause was and after just reprogramming the whole thing the this solved the issue. Last few saver 🙏🏻
You're welcome!
Thank you so much ! This solved the problem for me ! My garage wasn’t going up all the way after we had a thunderstorm
I installed this same opener last night, love it! Thanks for your video!
Great product by a great manufacturer! 👍🏼
Unbelievable I have spent over an hour trying to get this to work and in minutes following you I am done . Thanks so much
Glad to help, James! 👊🏼
MUCH better than the directions that came with the opener. They don't make clear it's the black button that's needed to make this work. It's much easier than other openers, but this made things a bit more intuitive.
kmeisterus
Thanks man! I appreciate the comment.
Sounds like you are a pro. I followed the Chamberlain instructions multiple times. I watched your video once. The programming fails to set the open limit every time. It continues to hit the bump stop. I even set the the open limit to about half open and when done it still raises to the bump stop. Chamberlain is beyond slow to respond.
Compliments on your video, that is the way it is supposed to work.
Phillip if it's not keeping the limits it could be the logic board. I know it sucks waiting to speak to tech support. Have your Model # and serial # ready. If it's under warranty Chamberlain will send you a new board. I would definitely go that route.
Also tell them Garage Door Genius needs his check!! Lolz
@@garagedoorgenius They had me disengage the door, set limits, run up & down and engage the door. It worked perfectly. A little undocumented trick.
Saved my day! Just installed my new garage door opener using the Chamberlain user guide and the open/close instructions were terrible! Thank you so much for this
Glad to help! 👍🏼
I just installed mine and its not programming 🥹🥹🥹 its giving me an error, excessive force to close, my guess is i have to adjust the rails on the side or something, manually door goes up and down not that bad
@@Subietech yeah I would definitely make sure the door isn't dragging and running pretty smooth. I would maybe lubricate the rollers, hinges, and springs. If you have an extension spring set up, hit those pulleys with lube.
Then press the yellow button twice. That puts it in force setting mode. Press the flashing arrow that's flashing. Let it cycle. Then press the flashing arrow again. Let it cycle....
@@garagedoorgenius thank you some much for taking a min and responding 🙏🙏 i will do that tomorrow hopefully that works, love your video by the way
@@garagedoorgenius hey can u believe i couldn’t programmed the limits because when hitting the up arrow i was going all the way to the stop to the bolt, you cannot do that u have to stop it like a inch before, i had to watch your video one last time and i noticed it 🙈🙈🙈 , thanks for your video
Same here I winged it and the belt was loose on one side and tight on the other because of too much pressure on the way down. Followed your instructions now works like butter.
Eddie Sanchez
Bad Ass!!
Thank you for the Video!!!
Excellent! Thank you ! Exactly what I needed... Programming the unit isn't intuitive, so thanks for your help!
Glad to help, Scott! 👍🏼
Easier than the Chamberlain manual! Great video.. thanks!!
No problem and you're welcome!!
Installed one of these today and was not doing anything thanks to this video i got it working thank you very very much
Glad to help you my friend! 🤗
Thank you for your video! You are the only one who have explained this correctly.
🙏
Thanx for the comprehensive and calm explanation. Better than the manual.
🙏
Thank you very much for your easy way to fix my door issue and because of your video I did it and fixed the adjustment !!
🙏
Exactly what I needed, thank you sir.
Thank you sir. Glad you took the time to post this. Now it's easy peasy.. Thanks
You're welcome 😊!
thanks a lot...i really appreciate your time to put up video so common people can get help...thanks again
rangtsen bbhoy
Your welcome! Thanks for watching.
Had to redo my limits after the drive chain jammed. So easy with this video, thanks!!!
Glad to help!
Quik programming video , very cool and helpful. Thanks 👍👍👍
You're welcome!
Terrific. Easy to follow and now I know what to do. Thanks!
You're welcome 😊!
I just installed my new opener like you have. I'm having issues with the garage door closing!! Instructions say, to make sure that nothing is blocking the reverse sensors, which "nothing" is. On the part where I say it has to get a feel for it? It comes up fine, stops where I have it programmed. Then when I press down it, it comes right back up? I had it working right off the bat, now it won't close, even when I programmed it right. The eye lens on the green one, sounds loose when I barley touch it, where the other doesn't. Any help would be greatly appreciated. Thanks
Very helpful. Far better then the other one I watched. You ga e far better instruction.
Thank you Michael! 🙏
Great! You saved me at least $75 I would pay for a tecnician! Thanks
Marcos F
You're welcome!
I have the b4505t version. Be aware that it does not have a battery back up. I fought it tooth and nail and to reset the unit to start the travel over, you leave it unplugged for a few minutes. Once I did that I followed this video and finally found success.
Hey I have the same Model and was wondering if this product is capable with wifi. Thanks Much
Thank God we found this video! Finally worked!
Awesome! So glad to help you folks.
Thanks for your help! They way they tell you to program it does not work! Your are the Man!
I appreciate the awesome feedback 😃.
thanks for saving the day for me a 75 yr old frustrated man
Not all heros wear capes!
Thanks for watching 😊
Thank you very much. I could now properly set the travel distance both ways.
You're so very welcome!
Thanks for the video. Saved some money with your help!
You're welcome!
Your the man brother!!! Easy tutorial and fixed mine quick
Sweet! Thanks for watching.
Exactly what I needed! 👏👏👏👏👏
I tried this and it all works fine when I test it, but when I leave and use my garage door opener from my car, the garage door does not go all the way upward like I set it to do. Thoughts?
I have the Liftmaster 8500, excessive force error. The 8500 is up like 16 ft, but I do have a control on the wall. What button is equivalent to that black button for wall controller?
Thank you for this video! I truly appreciate it. It saved me a lot of money! Thank you.
Thanks man! I just installed mine yesterday!👍💯😀
No worries brotha 🔥🤘🏼🔥!
Glad to help.
Thank You, simple and articulate. 👍🏻👍🏻
You're welcome 😊.
Worked like a charm, thank you
You're welcome 😊!
Thank you sir!!
I’ll echo the rest of the comments.
Chamberlain support should just link to this video!
Thank you for the comment!
My door try to close and then reverses on its own. Notices 4up and 1 down arrow blinking lights in the door closing device. They green and orange lights in sensor are on and not flashing, seems steadily on. Can no see any obstructions in between. I try to set with the adjust button but door wont go down more than certain exact level each time. Anything you can think of which can be helpful for me ?
Very Helpful. Thank you!
jayjay9935
You're welcome!
Hii! Thx for doing this but what do jbdo if it keeps blinking and won't go down at the final step of ptessure?
Check those safety sensors. 👍🏼
I’m getting an error code 15 that I have been able to fix by unplugging everything for a bit. I’m gonna try to reprogram it to see if it will keep me from getting this error in the future. If not, guess I will replace the logic board. Thanks for the video!!!!
Thank you! Short and sweet!
Thank you so much. This video is great.
@garagedoorgenius Thanks so much for this video!!!!! Chamberlain's manual is really poor because there is no image of the back of the unit and so their instruction about the adjustment button is not obvious and it seems like you should start the process by using the arrows. Your video saved my Sunday! Thank you!
You're very welcome! Glad to help my guy! 💯🙏
I get as far as going up and down pressing the black button. Then press the up works perfectly. Stops exactly where I want. I press the down button and it starts blinking and nothing happens. I unplug wait 10 sec, start over same end result. Any help would be greatly appreciated!
I had a block of wood under door- then I got the ‘excessive force’ error. Door works fine.
I followed your clear instructions, seemed to work fine. BUT the error is still displayed and not going away. I even did it again, still there.
Any way to clear those errors?
Well explained. It couldn't be easier!
Thanks! 💯
you did great vedio, clear explained, thank you. i fixed my garage because this vedio.
Awesome!
Thanks for watching.
Hola señor Richard... the unit we have is a chamberlain whisper drive plus... I will google it to find out more information about it... thank you so much for sharing this video....
Whisper Drive plus I believe the adjustments are on the side of the unit. You wanna back off the (down limit) if the opener is closing to hard.
You'll need a flat head screwdriver.
Thank you so much señor Richard for the tip I think my son(teenager)will follow all your advice and tips...may God bless your business with plenty of work and new customers...Gracias!!!
Very helpful, thanks!
You're welcome 😊
Awesome~Thank you, Richard. 👍
You're very welcome 😊!
Exactly what I needed, thank you!!
You're welcome Garrett. Thank you for the positive feedback! 🙏
Plain straightforward Information / plainly presented and obtainable / thanks
You're welcome Forrest! 💯
Another good video 👍
So, are these programming steps similar on most garage doors?
Is the Chamberlain myQ a great garage door opener to have? Would you recommend that model or is that just the model you happen to have?
Thanks man...please keep the good vids coming!
Collin Smith
These programming steps are for the newer technology Chamberlain/ Lift Master.
This machine was purchased by my client from Amazon. I've installed just about every model they offer. Fantastic product!
I highly recommend.
Thanks for the feedback. That makes me want to keep making videos!!
Good video, I'm trying to figure out why my garage door opens all the way on it's own. Not sure if it's a weird coincidence but it's happened when I've stepped out of my front door to leave for work and when I've come home from work.
Either someone else's remote is opening it or some out side signal. Easy fix, clear the memory. Press the learn button and hold it in until the LED light goes out. You'll have to reprogram remotes and the keypad. 👍🏼💯
Thanks man I was about to give up!
Don't give up brother! You always have a little fight left in ya when feeling defeated.
Great job on accomplishing the task!
Excellent video thank you sir !
Rojay Jr.
Your welcome!
Thanks for the info, watching from Jamaica 👍👍
You're very welcome! Yeah Boi! 🔥💯🔥
Thank you so much. My garage door is working again😊😊
Glad to help! ☺️
Thank you Señor Richard... great video with a lot of info on how to repair or solve the issue with the garage opener ... I don’t have my unit as new is that I think is a regular chamberlain feather or whisper model... i was working fine before but now we push the button on the wall and goes down ward but doesn’t stop... so I hope we have those arrow buttons on our unit and we be able to fix it... is so frustrating since I suffered a stroke I can’t repair anything around our house... wife and kids are doing everything for me around our house so I hope your video will help us to fix and use it again... Thank you so much sir!!!
You're welcome!
Please let me know if you need more assistance.
Thanks. Very helpful!
Wonderful explanation,thanks a lot Garage Genius
Thank you for this wonderful comment! 🙏
Smooth as butter! Thank you sir. 🎉🎉🎉
You're welcome! 👊🏼
Hola, ya programe la apertura y el cierre, pero cuando presiono para cerrar baja como 10cm y se vuelve a abrir, solo cierra si dejó presionado el botón hacia abajo, que estoy haciendo mal.
Thank you so much my friend , that help me a lot
No problem!
Thanks for watching.
Awesome easy adjustment video. Thank you!
The instructions that came with it make No sense.
Thanks again!
Glad to help! Thanks for commenting. 🙏🏼
Thank you so very much I was lost as to get the travel set
Mark Ferrell
Your welcome!
Your video helped me, Thank you so much.
@@jvedrine2002 I really appreciate the awesome feedback!
Thank you so much,,,,,,It work .....You save my money and time.......Cheers...
COLOMBO05
Your welcome
I was thinking about cutting those wires but after seeing yours coiled. I like to try that.
Coil them up! Just in case you ever need to rewire. 👍🏼
Request back wages from Chamberlain for providing this valuable resource. Their manual is a bolloxed up mess to understand. I tried their 800#, but that explanation on programming wasn't any better. When we couldn't get the unit to respond to input, they suggested I need a logic board.
After waiting a month and a half, I went back to Lowes., and they were great. I only had to exchange my motor unit with the bad logic board, with a new motor unit, took it home, and with your video to program, it's now up and running and working great. I apparently didn't have to set the force, b/c after setting the up and down travel, the light blinked 10 times, the unit went up and down by itself and then stopped. The wall button was blinking, I pushed it twice to syncro it, then watched your other video on programming remotes, and now everything works as it should. Contact Chamberlain and tell them you'll help them re-write the instructions.....................for a fee of course. Your instructions were to the point, and spot on and easy to follow and understand. I appreciate it. Thank you. By the way, my unit is a Chamberlain, model C2102.
I really appreciate the kind words! Glad you got it up and running. I try and make easy to follow videos.
I'm with ya, Chamberlain show me the money! 💯💪🏼
Big help my door was going down to far and actually bending the metal piece that the lock rides on. hopefully that corrects it and i don't need to buy a logic board
That should do the trick! 👊🏻
Thank you sooo much man saved the day👍👍
We've done these steps a few times. Works great for like 3 open/close cycles. After that it gets way out of sync, jams into the top bolt, then tries to go way too far down and comes back up automatically. We also have a Chamberlain model with a 10 ft door. Any ideas how to fix?
Thanks.
Sounds like a possible control module or circuit board. How old is the machine? May be worth your time calling Chamberlain tech support. Have the model # and serial number ready. They can tell you if it's under warranty. If so, they'll ship you what you need.
Hope this helps.
Is there a way to do this physically? It seems like the "Up" button on mine is broken. The black and down buttons are fine but the up doesn't respond when pressed at all.
Worked like a charm thanks
Awesome! 🤘🏼🙂👍🏼
works beautifully
Thank you so much for the video!!!
You're very welcome!
Easier to follow than any other video I've watched on this topic. I just installed the B1381 and have much more slack in the belt than what I see in this unit. How much is too much slack?
Thanks! 💯
You don't want the belt touching the rail when it operates the door. If it does, tighten it up a little.
nice video, it solved the problem - thanks
chris asbrock
Thank you!!