Fettuccini recipe on a cutting board! How to import a recipe to Lightburn!
Вставка
- Опубліковано 25 лип 2024
- ➡️ Click on ...more↙️for lots of Links!
➡️ Link to the Dollar Tree cutting boards I use. $30 for 24 Bamboo boards!
🔗 www.dollartree.com/cooking-co...
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
➡️ amzn.to/3oIzOzp
AVAILABLE NOW ON AMAZON!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - Навчання та стиль
Rich, thanks for showing the steps on tracing a recipe! I didn't know about the first step to adjust the image. This is great!!!!
Glad it was helpful!
Just getting started with the D1 Pro, and my hope is to get my wife's choc chip cookie recipe done in this same fashion for our youngsters...spread out now all over the country. thank you.
Sounds like a great idea Charles!
Rich, thank you for your great videos. Can't help myself laughing at your giggles. Keep up the good work, pal. Greetings from South Africa 🇿🇦, Pretoria.
Thanks so much Pieter!
I couldn't engrave a border line evenly around these boards. I thought something in my Lightburn template was off but then the light came on. I grabbed my framing square and found that these boards all have at least one side that is out of square. Since I have wood working tools I can fix the boards so I can put edge borders on the boards and not get any complaints from the picky Etsy customers.
Rich, when finances get better you will be getting a donation. I would still be in the Stone Age with Lightburn if I hadn't found you in their forum. Thanks for the great videos.
Hey Earnie! Yeah, I should have mentioned that! These boards are about the only work I don't do in a template for that exact reason. Thanks for the kind words Buddy, that's what really matters to me! I've got plenty more ideas on the to-do list! 👍
Good catch. I will have to grab one of my framing squares and my speed square and check mine.
You just amazing. Great tutorial presentation. Like listening to you talk keeps you interested. Have a great 4th
Thank you so much! I feel like I ramble at times trying to get my point across 😷 Happy 4th to you too!
I love your videos! Easy to understand, short and to the point. I have learned so much about lightburn! I can't wait to get started on some bigger projects.
Awesome! Thank you Marlene!
You are simply the best, learning so much from you.
Thanks for not taking your knowledge to the grave.
I appreciate that!
You have taught me so much! I will tell everyone about you you tubes they are perfect for the novice .
Thank you Wil, and thanks so much for the support! 👍
This is awesome , after we talked the other day , I got my laser homed in and working , I’m start on doing some of these cutting boards for practice! Thanks so much !
That is awesome! Have fun!
Thanks for the video, it will give me a leg up on doing my Christmas presents for my aunt's. I've been loving the cutting boards myself. I've been doing a lot of crazy sayings for my wife.
You are so welcome! I used to do the same when I first started! We have about 20 cutting boards around the house 🤣 I have some really nice decorations planned for the holidays! Stick around!
@@TheLouisianaHobbyGuy Just figured I'd give it a try tonight. I was able to get a recipe of my grandmother's banana pudding. Waiting for it to finish now. Thanks for the walk through of all of the steps.
Thanks for what you do. I plan to make these for my granddaughters for Christmas. All you videos are super helpful. Stay SAFE
You are so welcome Richard! These are the perfect gift!
Hello Rich. As always you are the Master of Laser Business. Easy to follow and understand . Thank you
I appreciate that Bob!
Love this idea. Thank you for putting out these videos, I am a newbie with the laser and have learned a lot from you. I have watched a few other people but your videos are more informative. So again thank you for all your hard work making my work easier.
Awesome, thank you Peggy!
Great job Rich!!!Every time I watch one of your videos I am inspired.
*Happy to hear that Gerald! Thank you!*
Fantastic idea Rich. That recipe looks darn good too(I’ll give it a try). As always thanks for sharing.
Oh! You gotta try it Ken! It's not called Evelyn's Famous for nothing! I keep a 1/2 dozen of these boards in a kitchen cabinet for when my wife cooks the fettuccini for guests because they all want the recipe! 🤪 That and her Rajun Cajun Chili & Swamp Gumbo are to die for!
That is impressive! You are so easy to follow. I am working my way through your videos.
Awesome! Thank you Bill!
WoW! That was so kool, thanks Dude. At our Farmers market I'm thinking $32.00 - $35.00 a piece!!!! Your style of instruction is super easy and simple to follow, and learn from!!!
Glad I could help!
Great idea, I like your originality. good tip on the cutting boards. Thanks I am new to engraving and need good tips
Glad it was helpful Tom! Thanks for watching!
Great video as always Rich...
Keep them coming
👍 More to come! I'm having fun making them, thank you!
Brilliant video, you explain everything so clearly and make everything so easy to understand and follow 👍🏻
*Glad it was helpful!*
The cutting boards are now a buck and a quarter but still a pretty good value. Enjoy your videos. They are to the point and very helpful. I'm a fan out here in Texas!
Glad you like them Mike!
Great video and the board looks great! Boards like these and other decorative pieces are why I bought the laser. I cut down and slabbed up 6 dead Ash trees. The bigger pieces I’m making tables out of. But I have quite a few smaller pieces that would make great charcuterie boards that I thought would be cool with personalized stuff like this. I also have a bunch of limb cut offs from other limbs and the trunk that, hard to explain, but they have an oval shape from the piece they were cut off from, and a short stub on the back from the limb. So with a little trimming they will stand up like a picture frame. I think various sayings and hopefully pictures burned on them will be nice.going to take a little work to get them leveled up under the laser, but I think the outcome will be worth it.
Thanks again for the great videos and explanations.
My pleasure Bob! Thanks for watching!
this looks so great and its nice and easy to make... thank Rich.
Glad you liked it!
Very informative! thank you, Rich!
My pleasure Mike; thanks for watching!
Thanks for all the awesome videos. My laser is still on its way to me here in Scotland, probably just as well as I must finish my tax return, then get some scrollsaw stock built up for my first fair in the middle of February 😁
I'll probably be sticking with the hardwoods I use for my scrollsaw work for a lot of things, so that should keep me entertained. I use mainly elm, and the colour, grain and texture is different in every piece 😳🤣
Best of luck with it Gillian! Hardwoods results are always awesome.
Cool beans. Great idea. I will definitely something like this. I APPRECIATE ALL OF THE TIME AND WORK that you put into each and every project.
I appreciate that Bud; thanks!!
Great idea Rich. I might do this for some presents for family members.
You should! It's a big hit!
Wow! They look amazing!!
Thank you John!
Amazing tips, I have learned so much from watching your tutorials. Thank you!
You are so welcome!
Wow. Really useful to a newbie like me. Thanks for sharing!
You're very welcome!
Beste Rich, bedankt voor een korte en krachtige uitleg! 👍
Je bent van harte welkom! Bedankt voor het kijken!
@@TheLouisianaHobbyGuy 👍🍀
Thanks again Rich and it turned out great and a g=eat idea. I enjoy watching your videos
Glad you enjoyed it Robt
Another good video and idea for making a few extra dollars. Well done.
Thanks 👍
Back before Christmas I was doing so many of these I stopped trying to trace them and started using threshold and just adjusting the image for the best burn. I also stopped removing lines or cleaning up letters. I found most people wanted it to look exactly like the original so allot of what I was removing to clean up the image was actually parts of the recipe or the handwriting that they wanted kept in.
Some of them I trace, and others I don't. It's all up to the customer Raymond.
@@TheLouisianaHobbyGuy for me I was getting better results on some of the images by just using threshold.
@@risbill1 Whatever works for you works for me!
@@risbill1 I'll try it.
I learnt so much plus enjoyed the video
Glad you enjoyed it!
Good Job again lookin forward to the next project.
Thanks again Rich! The next one is in the works! ✔
Awesome video Rich, you do such a good job. Do you finsh these with anything?
Yes, I used to use Shellac, but I switched last year to Rust-Oleum Triple Coat Glaze. Awesome stuff, with a mirror shine! Sometimes available at Lowe's, but cheaper on Amazon. amzn.to/3OZKBQy
press the fade image button whilst tracing a photo, so you can see the trace preview easy
I rarely use that Daryl, but thanks for the tip!
You videos are super helpful. Do you seal the cutting board after engraving?
Yes I do!
As usual a first class tutorial
Glad you liked it James!
I just came across your channel. Thanks for being so easy to understand. I just got my laser and haven’t even unpacked yet. I have 2 questions. Did you Borax or anything on wood before laser? Do you use an air assist? Thanks again
I personally don't Lynn. I just use the proper settings. Lots of people do though. Using Borax saves time since you can go a lot faster with a fraction of the power. But I like for my burns to actually engrave the wood, not char the surface.
Another great educational video 1 dollar chopping boards shame the dont ship to Ireland
They can't even meet up with the demand here David!
@@TheLouisianaHobbyGuy Hi Rich im not surpised they cant keep up with the demand with 1 dollar a board id make a killing over here
Excellent
Thank you so much 😀
Thanks! 👍
You bet! Bedankt voor het kijken!
Thanks!
You bet!
Love this
Thank you!
Question, I have an image I am trying to load to do similar engravings but lightburn will not load it. What type of file does the image need to be saved as? Will a png work or will I need to find a way to save the image as a vector?
Lightburn will load most images. jpeg, bmp, png, dxf, svg, pdf, etc.
Could you do a video on setting up and engraving an award plaque in lightburn, Using different fonts and font styles alone with borders and other little graphics? Thanks
I have a long list of requests Ashra. I'll add it to the list.
Great video.. good learning experience! thanks! Whats the metal plate with the cones on the left? Is that to hold work pieces.. where did you get it?
It's used for cutting to raise the work piece. Links are in the description.
@@TheLouisianaHobbyGuy Not available anymore but I'll keep looking. thanks!
@@mpcaz Nope, they're sadly discontinued.
I know what I am having for dinner tonight.....LOLOL. Great video
Thanks Keith! 😎
Hi Rich, stumbled across your channel, and may I say how refreshing your approach is, thank you.
Could I suggest a Brit version as we use different measures and terms😄. As a previous user of the industrial type of lasers I am learning, especially Lightburn. Again, thank you. Compliments of the season.
Thanks Rob! I appreciate the comments.
@@TheLouisianaHobbyGuy you're more than welcome Rich.
@@robmills4709 In all of my travels, that's one of the few translation books I've never seen. The British English to American English Translation Dictionary or the revers, either! As I've been to Britain several times, they would have came in handy!
I love this. Trying to make one for my daughter. However, when I do adjust image, I get a bunch of black squares and rectangles. Any recommendations? Thanks.
I don't know, maybe you have the layers in fill mode?
@@TheLouisianaHobbyGuy thanks.
When you were showing the burn, I didn't see any air assist. Do you use aa, or just clean your boards off when you are done?
Hi Dewey, I don't use air assist because most people don't have it. And while my shop is being remodeled, I'm working in the garage in a make shift environment. So without air assist, I use a box fan. It does basically the same thing. I mist the boards with water to let the soot stain the wood, then after a few hours, I come back with a paper towel and rub the board. It takes all the soot on top off. The soot will only stain the engraved part of the wood. Finally I seal them.
This is a great video!!! I learned so much!!
My words came out as a trace, not solid. Do you know why?
@@TheLouisianaHobbyGuy Mine did too. Instead of creating it with a smooth line it's like bubble letters that kids write. So instead of the letter I having one line it is like an oval. I can't figure it out how to just show one solid line. Or the letter O is actually two circles. Outer circle with an inner circle. How do you get it to be one solid line?
@@kerrylinger8018 Okay, so change your settings on the laser tab mode for the words to FILL.
Change your settings on the laser tab mode for the words to FILL.
hey rich, good videos, I just suggest how about photo, engraving,
This was a specific maker video. I have others with images.
In my lightburn sometimes the enhance radius and enhance amount doesn't do anything. Why is that?
If you item is selected, it will work Kydenj.
Curious how you manage the recipe cards that are lined. Looking for an easier way to remove those lines.
I just use the trace method and move the slider until the lines disappear Evan. There will always be some cleanup.
Great job! Ive watched quite a few of your videos and learned tons from each one! Just got my Fox Alien Reizer and can't believe there is that much a guy can do with it. Tons of projects out there. Should be getting more sleep than I am.
Keep the video's coming! CHEERS!
Great to hear!
Thanks for the video, really enjoyed it. What do you use to "finish" the board, some sort of oil?
Not oil Simon, on these I use Shellac, 2 coats.
@@TheLouisianaHobbyGuy Thanks for the info!
@@simonford6142 My pleasure! ✔
Now I'm craving fettuccine lol.
Did you have to put any kind of a top coat afterwards? If so, what did you use?
Ha ha! 🤓 Follow that recipe and you'll be very happy with the results!
I like your videos and learned quite a bit from you. I have done engravings and laser-cut stuff for family and friends but never charged. I finally got my first order that I can charge and they asked for a quote. I honestly do not know how to price what they want. They want 15 circular(8" diameter) bamboo wood cutting boards with names engraved. They are providing the bamboo cutting boards. Any guidence would be nice.
I normally would never do a project for less than $10 production cost. Since there is no finishing or cost of goods, I would probably charge around $200 for this project.
Thank You. That helps.
Hello again,
How can I frame my cutting board or any other object for that matter, using the actual laser light with my roly laser? This would be very helpful. Some lasers like the xtool come with this feature
You have to turn the feature on in the Device Settings Rafael.
Hi rich. Do you have to remember what the feature setting are?
So do you mean the following settings:
1) enable laser fire button
2) enable Laser on when framing
Will the software compensate the laser setting for this?
That's how it's done. No compensation.
Another great video. Thanks! Have some Crawfish for me. Lol.
You bet! We do a boil every weekend when they're in season! 😎
@@TheLouisianaHobbyGuy as a former airline pilot, New Orleans was one of my favorite layover cities. Love the food. And the people!
We have a brand new airport now Fred! It's beautiful!
I have a small gift shop here in Cathlamet, WA. What do you charge for your finished boards? I’m thinking of adding the boards to the shop. Thank you for all the great videos, they have been a great help.
For the recipe boards I charge $24.95. I get these for $1.25/ea, so I would have to add more if I pay more for the boards. There was a few months when Dollar Tree was out of stock and I had to pay $6/ea, so during that time the price was $29.95.
Good afternoon, your videos are very good.
A query ... more or less what is the useful life of diode lasers like the LOM2P?
Thanks
Ortur claims 10,000 hours John.
@@TheLouisianaHobbyGuy Thank you very much for the reply...
@@jhcordobaMISIONERO My pleasure!
Hi Rich. In a future video could you show the metal bed plate you are using to burn the stuffs above it ? Should be very appreciate. And sorry for my bad English !!!!
I'll make sure to show it in the next maker video!
@@TheLouisianaHobbyGuy Thanks a lot, great
@@TheLouisianaHobbyGuy do you have a link to that video? I need to make a bed for my new Neje 30w
@@JasonPeltier I'm not sure which videos it's in, but it's in several of them. I actually used a grate from an oven pan for a long time that worked really well.
Great idea! My wife of 47 years has a box with 3x5 cards with handwritten recipes on them. I know my daughters would like this. A question or two and if you covered it in the video for some reason I missed it. Do you put any finish on these? Do you put a small hanger on the back or do you let the purchaser decide how to display it?
Yes, I usually finish them with Shellac or clearcoat. I use a 3-D printed stand.
👍
👍🙋♂️👍
Great video rich i just did a 11 X 14 cutting board and plan on do a giveaway with it thanks for the tips
Glad I could help!
What happened to the "y" that you replaced in bottom line? It's missing in the burn.
*Good catch Timothy!* I have NO IDEA! I never even noticed it! It wasn't on another layer and it was in the preview! Don't tell my wife! 😬
Do you spritz with water & use poly on the bamboo? I thot I saw you saying that but so many videos etc & so feeble & confused a memory. Thanks
I spray it with water and let it dry naturally Paul. That causes the soot to stain the engraving. Then I just use a spray clear coat.
I order cases of these cutting boards and they go quickly.
They sure do! I haven't been able to get site to store shipping for over 2 months now!
What size co2 laser ?
What size? What do you mean?
@@TheLouisianaHobbyGuy do you have a c02 laser or just diode ?
@@zachofalltrades6116 I have a 50W C02.
How do you sell on FB?
I sell on Facebook Marketplace, usually about once a week in my local market.
Anyone know what he sprayed them with?
Shellac
@@TheLouisianaHobbyGuy spray can? I can't recall seeing that at any store recently.
Lowe's has it, yes, spray.
@@TheLouisianaHobbyGuy 👍 Thanks I'll take a look.
hi rich need tip on a pic i did it and it made it inside out lol
🤪
Like
👍
15 minutes for an expert 2 hours for a rookie !!! hahahaha I have a (minor)emergency, how the heck do I regroup the menus on the right side of of lightburn to be one over the other?? I messed around and made them all full size top to bottom and tabs across the front. ?? Thanks in advance
Click *Window* from the top toolbar --> *Reset to Default Layout* .
*Don't feel bad! I've done it myself!* 😎
@@TheLouisianaHobbyGuy Awesome thanks again !!
@@jbouza09 My pleasure!
Good morning how are you doing today, I have a question I use lightburn and I love it, but I haven't been able to pay for it, I'm on the free month yet, but only one day left, and I don't want to lose it, what can I do to pay it and keep it, if click on bay lightburn nothing is happening, I need some help, please and thank you
You can contact support on the Lightburn Forum. They're very responsive! forum.lightburnsoftware.com/
@@TheLouisianaHobbyGuy thank you, I will try
Rich, I think this video put a rush on these cutting boards. I called the company and was told there are not any of these cutting boards in any of their warehouses in the US of A. It would be nice if they gave you a commission.
Don't I wish Kris! 🤪 I've been getting them for more than 2 years without a problem, and then within 2 weeks of the video, they're now always sold out! You might be right.
@@TheLouisianaHobbyGuy I just talked to Dollar Tree and they told me there still aren't any cutting boards in any of their warehouses in the US. They probably have sitting in a ship off the coast of Los Angeles.
@@TheLouisianaHobbyGuy no sooner than I sent the last comment my order arrived at my house. I now have 48 of them. When I talked to the gal at Dollar Tree she didn't say that my order had shipped either. Now the fun begins.
@@krisknowlton5935 Have fun!!
$50 an hour for having fun is good money ... LOL!
You bet it is Leo!
I know you have moore video , My sugestion is make some videos specificly dowload and engrive a photo send me a copy of.
I have a long list Carlos...