KENWOOD COMPACT DISC STEREO SYSTEM REPAIR

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • IN THIS VIDEO WE REPAIR A KENWOOD COMPACT DISC STEREO SYSTEM HAVING A DISTORTED SOUND IN THE LEFT FRONT SPEAKER AND TROUBLE ON THE SURROUND SPEAKER'S. BUT FOR THIS TIME WE ONLY REPAIR THE LEFT FRONT SPEAKER FOR SOME REASON (STK411-230D) NO PART'S AVAILABLE .

КОМЕНТАРІ • 108

  • @robcastaneda1
    @robcastaneda1 3 місяці тому +1

    I had this one but a version with 5 speakers and surround settings.

  • @zekeriyacanpolat6086
    @zekeriyacanpolat6086 2 роки тому +1

    Usta bu ürünü tamir edip kullanmayı tavsiye edersin yoksa Ariza li satayimmi

  • @RLC415
    @RLC415 Місяць тому

    I have kenwood model xd- v929. No sound on the front speakers. More than 20 years not use the unit. I connect only the front speakers when I tested it, but no sound. What will be the problem sir? Can u help me?

  • @ramkatikar9898
    @ramkatikar9898 3 роки тому +3

    My kenwood mini hifi component device after starting the device ,its gets into demo mode,after reset it doesn't respond,please help!

  • @Franconahuel___
    @Franconahuel___ 3 роки тому +1

    To remove the locked compact if or if I have to remove everything from above? Thanks

  • @talib2464
    @talib2464 Рік тому +1

    Hi bos i have same hifi model my problem is produce slow sound at right speaker channel and left speaker channel no sound, while i turn on it shut off and protection at display..can i know what problem related to that issue maybe you can help me to find problem..

  • @ertepe2347
    @ertepe2347 Рік тому +1

    Hello, I have the same one, but when I connect a source to the AUX input, a very bad and distorted sound is heard. The internal sources and radio is OK. Do you know where the problem might be. Thank you very much.

    • @DANEXTTECH
      @DANEXTTECH  Рік тому

      Yes sir kindly check your input wire being used or try to replace it maybe it was a lack of grounding connection...

    • @villagerse
      @villagerse 6 місяців тому +1

      Which source??

  • @thesandman258
    @thesandman258 2 роки тому +1

    What exactly did you do to the amplifier board ? 🤔

    • @DANEXTTECH
      @DANEXTTECH  2 роки тому

      Since the surround AMP Driver I C is Defective and I don't have a replacement . I Only used the Left/Right Amp..then replace.the defective sub speaker.

  • @Mozart_Edrick
    @Mozart_Edrick 4 роки тому +1

    Nice

  • @ikilltimeutube126
    @ikilltimeutube126 2 роки тому

    Wonderful video, I got back my XD v92 model which was dumped for 20 years. It still works, is there a way to use it with aux input? I want to plug in my phone and play songs on it. I tried plugging a 6.3 male adaptor to some phone input, didn't work.

    • @DANEXTTECH
      @DANEXTTECH  2 роки тому

      you'll just need a RCA to baby plug AUDIO CORD

    • @markjimher6514
      @markjimher6514 2 роки тому

      hello how to disassemble the disk system I have the xd750 I don't know how you could help me by showing a video please

  • @therealtv4270
    @therealtv4270 4 роки тому +1

    good info

  • @richardvlog356
    @richardvlog356 3 роки тому +1

    I have the same model but all speaker damaged i cannot buy any same speaker can u give me the details of all speaker iwant to assemble thanks

    • @DANEXTTECH
      @DANEXTTECH  3 роки тому

      you can change that with other brand speakrs important is the diameter..and type..same as what i did

  • @DMasterVlog
    @DMasterVlog 2 роки тому +1

    sir tanong lng same po ng component kenwood din ayaw gumana ng volume?anu kaya ang problem.

    • @DANEXTTECH
      @DANEXTTECH  2 роки тому

      Check amplifier driver I C kung OK..PABA..SIR..

  • @andreisalads7499
    @andreisalads7499 Рік тому +1

    Sir saan banda ang location mo ?.

    • @DANEXTTECH
      @DANEXTTECH  Рік тому

      Davao city po

    • @andreisalads7499
      @andreisalads7499 Рік тому

      @@DANEXTTECH layo Naman Pangasinan ako Kasi may pagawa Sana ako Kenwood equaliser.

  • @Shamsithaca
    @Shamsithaca 2 роки тому +1

    oh wow no cooling fan for such a big amp???

  • @kousaralidhinojwala2432
    @kousaralidhinojwala2432 2 роки тому +1

    In my system immediately after power in I get protection display on its screen

    • @DANEXTTECH
      @DANEXTTECH  2 роки тому

      POWER AMP DRIVER DEFECTIVE

    • @mtahir8224
      @mtahir8224 2 роки тому

      I have the same problem
      Protection error on power on the system
      How to correct it

  • @aribrehman7396
    @aribrehman7396 4 роки тому

    Please also say how to know when speaker are successfully connected to amplifier

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      you can simply know if you had a multi tester for testing

  • @zekeriyacanpolat6086
    @zekeriyacanpolat6086 2 роки тому +1

    Merhaba Antalya dan selamlar benim Kenwood rxd g5 sol kanalindan ses gelmiyor...parça ismini yazarmisiniz ... teşekkür ederim

  • @UTTAMMUKHERJEE-ey3zg
    @UTTAMMUKHERJEE-ey3zg 7 місяців тому +1

    App kahase

  • @manimaren64
    @manimaren64 Рік тому +1

    Hello anyone can help ..
    my kenwood xd-v737 model.cant on power...just show standby power but nothing function

    • @DANEXTTECH
      @DANEXTTECH  Рік тому

      Kindly check some fuseable parts in power supply section and measure it for each output voltages.

  • @Bhukkad_घुमक्कड़
    @Bhukkad_घुमक्कड़ 3 роки тому

    भाई तेरी आवाज ऐसा लग रहा है की तु 65 रुपया वाला पी कर वीडियो बनाया है ,,😀😀

  • @Ajaykumar-ub8bs
    @Ajaykumar-ub8bs Рік тому +1

    portecsan problem solved video

  • @nagau1782
    @nagau1782 2 роки тому +2

    I have this same model

  • @itsjazlan5068
    @itsjazlan5068 3 роки тому

    Hi my amplifier same just like you . But when i turning it on after few seconf it automatically shutdown . And keep on stanby mod/demo mod . Can u figure what problem that is ? Thanks 🙏

  • @bannylugasan6786
    @bannylugasan6786 4 роки тому +1

    Sir how repair my mini component kenwood. No power

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      FOCUS KA MUNA POWER SUPPLY SIR CHECK

  • @abidahaque8518
    @abidahaque8518 3 роки тому

    I have this speaker system however it won't turn on. I pressed play, power button, eject button everything. It remains on standby mode with the three lines showing on screen. How to fix it?

    • @DANEXTTECH
      @DANEXTTECH  3 роки тому

      Hi there, the unit has a symptoms of a error on MCU that needs a qualified technician to do.. THANKS ❤️

  • @nagau1782
    @nagau1782 2 роки тому

    Bro how to increase sorrund sound without remote?

  • @aribrehman7396
    @aribrehman7396 4 роки тому

    Bro same model can I know how to connect speaker with amplifier still I can't understand to how to connect speaker to amplifier I have the same one u show in the video

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому +1

      if your speakers are still original just follow the colors marking ex L /R on lower portion for the big two speakers
      ,FRONT L,FRONT R,CENTER AND OTHER SMALL are the upper portion

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      @@DANEXTTECH whole system is original bro nothing is duplicate

    • @aribrehman7396
      @aribrehman7396 4 роки тому +1

      @@DANEXTTECH ok got it thanks bro it's working i m big fan bro it worked 😘😘

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      Bro my surrounded n center speaker port aren't responding means no current is coming to ports n subwoofer r responding very slowly how should I fix it please help

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      @@aribrehman7396 FOR THIS TROUBLE YOU NEED TO CHECK FIRST YOU SPEAKERS THEN THE STK DRIVER IC LIKE THIS VIDEO
      REPAIR WHAT I DID

  • @user-tx8pw9ct7f
    @user-tx8pw9ct7f 3 роки тому

    One side twitter not working plz reply

    • @DANEXTTECH
      @DANEXTTECH  3 роки тому

      You better to replace it sir.

  • @TheCoconutDaag
    @TheCoconutDaag 3 роки тому +1

    Bro how to repair my cone ..
    It is flat. Know 😔
    Can you help🙂

    • @DANEXTTECH
      @DANEXTTECH  3 роки тому

      What type is that sir

    • @TheCoconutDaag
      @TheCoconutDaag 3 роки тому

      It is made up of paper bro as you have shown in the video it's Kenwood 🙂

  • @arielref4252
    @arielref4252 4 роки тому +1

    Shout idol

  • @mirzaraheelbaig3901
    @mirzaraheelbaig3901 3 роки тому +1

    i want this sound system

  • @aribrehman7396
    @aribrehman7396 4 роки тому

    Bro please say me how do I reset this system it has entered protection mode how do I bypass it

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      PLEASE CHECK ALL IC JOINTS MAYBE IT HAS A SHORTED PINS

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      @@DANEXTTECH after that what should I do

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      @@DANEXTTECH means shot pins will be downward facing??

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      @@DANEXTTECH please bro can u give my your WhatsApp contact

    • @aribrehman7396
      @aribrehman7396 4 роки тому

      Is this system equipped with digital protection mode???

  • @roshleyfigueira3007
    @roshleyfigueira3007 3 роки тому

    Hii can u repair my kenwood deck

  • @rantherencepacatan4346
    @rantherencepacatan4346 3 роки тому

    Sir magkano po magpagawa ng speaket ganyan din po keenwood lahat di gumagana

  • @norvindejesus7806
    @norvindejesus7806 4 роки тому +1

    Pioneer vs800 sir nawawala minsan sound ano kaya trouble

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      try to check volume control...

    • @norvindejesus7806
      @norvindejesus7806 4 роки тому

      Minsan pag nawala sir kinakatok ko lang bumabalik na

  • @user-tx8pw9ct7f
    @user-tx8pw9ct7f 3 роки тому +1

    Bro I have this Kenwood system

  • @rantherencepacatan4346
    @rantherencepacatan4346 3 роки тому

    Defected din po lahat san po location m sir

  • @alevalencia5473
    @alevalencia5473 2 роки тому +1

    lo más importante no mostraste los parlantes

  • @amanrandhawa2263
    @amanrandhawa2263 3 роки тому

    my car music system after 20mint off why pllz reply

    • @DANEXTTECH
      @DANEXTTECH  3 роки тому

      A DAMAGE AMP DRIVER IC ...SO IT NEEDS TURN IT OFF TO PROTECT THE OTHER CIRCUIT.

  • @kaparthisharma7329
    @kaparthisharma7329 3 роки тому +1

    My Kenwood speaker need to be repaired.If anyone can repair this stereo system,please reply me.

  • @shotgunn5952
    @shotgunn5952 4 роки тому

    San loc mo boss

  • @dpk5633
    @dpk5633 4 роки тому

    No power... dead.... How repair?

    • @DANEXTTECH
      @DANEXTTECH  4 роки тому

      fucos on power supply section first

  • @audyaaudya3105
    @audyaaudya3105 4 роки тому +1

    Tolong beri subtitle bahasa Indonesia.

  • @alexanderortega6835
    @alexanderortega6835 Рік тому +1

    Lora

  • @wasehwahes2191
    @wasehwahes2191 4 роки тому

    Kalau protek