That moment or terror before you simulate and the feeling of excitement after realizing it worked! Why am I enjoying this emotional roller coaster!? LOL I never imagined I would have this much fun. Geeking out for sure!
Thank you so much for this! I thought I know everything but oh boy I don't. So nice of you that you share so much knowledge for free, gonna binge-watch everything today ^^
I was following until you started sewing the waistband on the pants. I couldn't follow that because I couldn't tell if something was being sewed twice or not. The top of the waistband looks like it was sewn multiple times to different places.
Hard to understand. What do you mean by the length of the spec and the length of the pants? (The elastic waistband part) does it mean you put the measurements on the segment length or total length? And, I see no stretch difference for the puckering tool. It just applying texture.
Thanks for the lesson, learnt loads. Is there a good laptop/gaming laptop you'd recommend that handles Clo and its full functionality well? My oldish Mac is struggling a bit. Thanks in advance 🙂
In your Library, at the top there is an icon for downloading; this will check your current library and see what is missing. The icon looks like a tray with an arrow pointing down. You can do this any time to check OR when you see blue dots next to the categories in your Library this means there is new content.
Thanks! He is in with the standard Male v2 Avatars in the Library. That is Thomas. IF you are missing assets in the Library make sure to click the Download icon at the top.
Thank you for the video! :) just the third folder says quick elastic band and the fourth true elastic waistband appear in the google files but this fourth one was never explained. will we have that too?
Are you in CLO or in Marvelous Designer? MD does not have puckering. If you are in CLO and cannot see it you might just need to expand/open the side panel wider. There are also little arrows to scroll over to the tabs that may be hidden.
@@CLO3D thanks for your reply.. 😁😁😁😁 Clo 3d is great software im started to learn this software.. Its cool i have my yt channel.. Its fun to create a model.. 😁😁😁
@@CLO3D hello. I am working my project right now creating a runway stage my own design.. But im not desigmer😁😁😁..lm a pattern maker in my country.using gerber software. Thanks for this 3d additional learning..😁😁😁😁🙏🙏🙏
@@CLO3D my laptop is to slow😁😁😁😁 its hard to run faster.. I am use a clo 4.2. ..i cant install the newer ver.. 😂😂😂..but its still ok for me..to use... This old ver.. Clo...
@@modestaph3082 So sorry to hear you are struggling. If you are unable to update to a newer version, it may be because your hardware is not adequate; this may also be the cause of the slow speed.
It is the Topstitching Disappearing. Because each stitch is an individual OBJ (Object File) it take too much processing power to have them simulate. So CLO temporarily remove them visually during Simulation and then beings them back when you turn Simulation off. If you need to see them you can change a topstitch from OBJ to Texture, but I think OBJ looks best. And if you ever Render or animate they will be there in final renders
That moment or terror before you simulate and the feeling of excitement after realizing it worked! Why am I enjoying this emotional roller coaster!? LOL I never imagined I would have this much fun. Geeking out for sure!
OMG, it's that wonderful!! Thanks for sharing.
Thank you, very helpful, super easy to understand. Speaker has a very pleasant voice too!
Glad it was helpful!
Thank you so much for this! I thought I know everything but oh boy I don't. So nice of you that you share so much knowledge for free, gonna binge-watch everything today ^^
LOL. Binge on!!
I was following until you started sewing the waistband on the pants. I couldn't follow that because I couldn't tell if something was being sewed twice or not. The top of the waistband looks like it was sewn multiple times to different places.
Hello - Here is another waistband tutorial that is a similar technique and might help you.
ua-cam.com/video/aV0Bzc6pXbI/v-deo.html
@@CLO3D Thank you so much!
Hard to understand. What do you mean by the length of the spec and the length of the pants? (The elastic waistband part) does it mean you put the measurements on the segment length or total length?
And, I see no stretch difference for the puckering tool. It just applying texture.
Can you specify exactly where in the video you are asking about?
Super helpful, thanks! Please would you have a fabric recommendation for the elastic used inside of waistbands? Thanks! C
Currently elastic is applied to segment/internal lines. We do not have a fabric/material that behaves like elastic.
You are a good teacher 😊
Thank you! 😃
Thanks for the lesson, learnt loads. Is there a good laptop/gaming laptop you'd recommend that handles Clo and its full functionality well? My oldish Mac is struggling a bit. Thanks in advance 🙂
have a look here for suggestions. support.clo3d.com/hc/en-us/articles/115000307168-CLO-system-requirements-May-2021-
Hi, thank you for this video. It seems as if the waistband is missing from the men's elastic short file.
It is in the "Quick Elastic Band" Project file.
How can i have those top stitches in hardware and trim cause my library is blank? Thank you
In your Library, at the top there is an icon for downloading; this will check your current library and see what is missing. The icon looks like a tray with an arrow pointing down. You can do this any time to check OR when you see blue dots next to the categories in your Library this means there is new content.
I loved the tutorial, I have a question, where can I find that male avatar??
Thanks! He is in with the standard Male v2 Avatars in the Library. That is Thomas. IF you are missing assets in the Library make sure to click the Download icon at the top.
Thank you for the video! :) just the third folder says quick elastic band and the fourth true elastic waistband appear in the google files but this fourth one was never explained. will we have that too?
Sorry for the late reply. Were you able to find out the information you needed.
Can you guys please just upload the finished version.
This is a lesson on how to create a garment with elastic. If you are looking to download finished garments go here. connect.clo-set.com/
Thank you for your video. Just one thing : where can i find the puckering ? It not appear in my Object Browser window.
Are you in CLO or in Marvelous Designer? MD does not have puckering. If you are in CLO and cannot see it you might just need to expand/open the side panel wider. There are also little arrows to scroll over to the tabs that may be hidden.
Sorry if this is an obvious question. But from where doni get/tind the elastic property? ☺️
When you select a pattern piece or segment line, the elastic properties are in the property editor.
Mine looks a lot smoother than yours before you applied puckering.
There are a few factors at play here; what fabric is in use? What is the particle distance? Is the pattern the same size as in the video?
how to sew the waistband on the practice file of True Elastic Waistband?
This technique is for replicating the elastic effect. There is not a true fully elastic material.
Hi hello from Philippines.. Nice tutorial. 😁😁😁😁😁😁😁😁😁😁
Hello 😊
@@CLO3D thanks for your reply.. 😁😁😁😁
Clo 3d is great software im started to learn this software.. Its cool i have my yt channel.. Its fun to create a model.. 😁😁😁
@@CLO3D hello. I am working my project right now creating a runway stage my own design.. But im not desigmer😁😁😁..lm a pattern maker in my country.using gerber software. Thanks for this 3d additional learning..😁😁😁😁🙏🙏🙏
@@CLO3D my laptop is to slow😁😁😁😁 its hard to run faster.. I am use a clo 4.2. ..i cant install the newer ver.. 😂😂😂..but its still ok for me..to use... This old ver.. Clo...
@@modestaph3082 So sorry to hear you are struggling. If you are unable to update to a newer version, it may be because your hardware is not adequate; this may also be the cause of the slow speed.
does that default puckering normal map comes with Clo 3d?
Yes it does.
Thank you, very helpful!
You're welcome
In the first example why are my lines not marked in the same way?
In the same way when I press simulate, the seams disappear.
Can anybody help me?
It is the Topstitching Disappearing. Because each stitch is an individual OBJ (Object File) it take too much processing power to have them simulate. So CLO temporarily remove them visually during Simulation and then beings them back when you turn Simulation off. If you need to see them you can change a topstitch from OBJ to Texture, but I think OBJ looks best. And if you ever Render or animate they will be there in final renders
@@CLO3D Thank you, I get it now
Thank you for your video!!!!!!!!!!!!!
You are welcome!
Where to download topstitches package?
It should automatically already be in the Library > Hardware and Trims > Topstitches
Thank you🌝
keep doing this!
LOL. Will do!
perfect
Thank you.
Thanku so much
Welcome!