BTW your video is the best so far as to sight in the pins on this site. Thanks, I was looking everywhere for someone who knew what they were doing and made it simple to understand
Once you sight in at 20 by adjusting elevation housing how do you sight in your 30 yard pin if adjustment is required? I never saw you comment setting in your 30 yard pin. Did I miss it in your video?
I have one. After 5 years the finish became sticky and tacky attracting dust and dirt. I hate those rubberized finish. Stay away from them. I have a Joker 4 pin that came with my bow. It's back on. Only buy powder coated aluminum.
You adjusted the 40? Wait so you can set up the react h5 for 30,40,50,60 and 70 by following the same rules only set the first pin to 30 instead of 20? Makes sense I guess but I thought I was locked in to 20,30,40,50,60 with this sight…
My top pin is set at 30 on old sight. 20 and 30 are just too close. Can I set top pin on this sight at 30 and do second at 40 and other pins fall in correctly? Looking at this sight but looking at Hotwire sight if not
So you didn't have to do anything with the 30 yard pin. But moved the adjustment when you was at 40 yards. Doest that mess up the 30 yard pin or make it also move? If not then the way i understand this. If you get 20 yards set right. The technically you shouldn't have to move anything at all for the 30 yard pin!
I just got the H5....but someone was telling me it might not work because the speed on my bow might be to slow. I have a diamond outlaw at 28" DL and its 48 DW......do you think I would have an issue sighting it in?
Ruben P yes, it will be an issue you need faster speeds I would suggest a spot Hogg fast Eddie for your speeds. Get the double pin or call me at the shop and we will take care of you.
You can sight in at 20 and 40 but you will need to tune them. The sight will be good for pin gaps but you will need to tune your bow to your exact broadhead
If your supposed to set the 1st and second pin at 20 and 30 yards and all the others fix themselves then how do i adjust just the 20 and 30 yare pin seperately?
20 yard is adjusted by the gross adjustment, the 30 is adjusted by using the tool you see him using. The 20 yard is independent of the rest of the pins.
One of the best instructions for the React sight . Others are confusing, not clear on the instructions . Thank you .
Glad it was helpful!
BTW your video is the best so far as to sight in the pins on this site. Thanks, I was looking everywhere for someone who knew what they were doing and made it simple to understand
John LoPresti thank you !!
thanks mate great instructions new to the sport think ill put this one on my new bow.
Great instructional video! Love my React 5
Loved the video! Also I love counting how many times you touched your peep
Once you sight in at 20 by adjusting elevation housing how do you sight in your 30 yard pin if adjustment is required? I never saw you comment setting in your 30 yard pin. Did I miss it in your video?
Good review thank you Sir
I have one. After 5 years the finish became sticky and tacky attracting dust and dirt. I hate those rubberized finish. Stay away from them.
I have a Joker 4 pin that came with my bow. It's back on. Only buy powder coated aluminum.
You adjusted the 40? Wait so you can set up the react h5 for 30,40,50,60 and 70 by following the same rules only set the first pin to 30 instead of 20? Makes sense I guess but I thought I was locked in to 20,30,40,50,60 with this sight…
What about you start with 25 yd and second 35 yd, those the rest will come 45, 55 and 65???
When you started adjusting the 40yd pin, did that throw off your 30yd pin then? Since the 30, 40, 50, 60 all move together.
My top pin is set at 30 on old sight. 20 and 30 are just too close. Can I set top pin on this sight at 30 and do second at 40 and other pins fall in correctly? Looking at this sight but looking at Hotwire sight if not
what if you setup the first pin for 25. setup the second pin at 40. what will the remainder of the pins be?
Michael J. Rovnyak hey! I have not done that and I’m not sure it will work
So you didn't have to do anything with the 30 yard pin. But moved the adjustment when you was at 40 yards. Doest that mess up the 30 yard pin or make it also move? If not then the way i understand this. If you get 20 yards set right. The technically you shouldn't have to move anything at all for the 30 yard pin!
I just got the H5....but someone was telling me it might not work because the speed on my bow might be to slow. I have a diamond outlaw at 28" DL and its 48 DW......do you think I would have an issue sighting it in?
Ruben P yes, it will be an issue you need faster speeds
I would suggest a spot Hogg fast Eddie for your speeds. Get the double pin or call me at the shop and we will take care of you.
What bow are you shooting?
when broadhead tuning do i sight in 20 and 40 or just 20 and be on target at 50-60
You can sight in at 20 and 40 but you will need to tune them. The sight will be good for pin gaps but you will need to tune your bow to your exact broadhead
If your supposed to set the 1st and second pin at 20 and 30 yards and all the others fix themselves then how do i adjust just the 20 and 30 yare pin seperately?
20 yard is adjusted by the gross adjustment, the 30 is adjusted by using the tool you see him using. The 20 yard is independent of the rest of the pins.
I ran out of adjustment with up an down before making it to 20 yards??? What now lol shooting about an inch low or more
what weight arrows are you shooting with it?
So I like the sight but, at 10 yards I'm shooting 8 inches low and un able to move my sight any lower. Any ideas
What’s the poundage of that bow? What arrows are you shooting ????? 10 yards?
@@KorbinsArchery 68lbs shooting Easton 400's 28 inch arrows
@@djbaldwin2301 back up to 20 and use the top pin
If that doesn’t work send me images on Instagram of you at full draw
What size peep were you using with this?
Travis Van Es medium
What Bow is it that he has? I think it is a Matthews Helix or something close
Vertix
Can i set the top pin for 15 and the 2nd for 20?
I’m sorry but you can’t
I wont shoot over 50 can I sight 10 and 20 will 30 40 50 be right
Jonathan Hatfield really need to do at least 20 and 30 to have it be accurate. It’s not really set up for a 10 yard pin
Possibly the worst explanation on how to set up the sites, He might as well been talking to himself.
Bless your heart bill. You seem to be the only that feels that way. In the mean time I hope your day gets better and that one day you find happiness