Thanks for stopping by! To all the advanced pilots, it there’s anything I forgot to mention or did wrong, please let me know in the comments!! Hope everyone has an awesome weekend and I’ll see you next Friday with a much shorter video 😂
Great video and that way of installing the capacitor is exactly what I was looking for before ordering this frame. Thanks for all the insight and great flying 👍👍
great video! :D feel lucky that you did this build. Doing my first ever build and majority of my parts are the same! :D. Will be watching this religiously whilst building. Thanks and great video!
Im thinking in building this drone when i got the money, 6s for freestyle and 4s if i want a longer flight time possibly make some lipo 4s, frame: source one, motors: xing 2 2207 1700kv, flight controller: speedybee f405, some elrs reciver, foxieer lolipop antenas for video, but here i have a question, if on my googles i have sma, and on my vtx mmcx why there are just packs of 2 with the same conector?, im planning on putting either a 800mw rush vtx, because is light for proximity flights, or reaper extreme 2.5w for long range, but for moment the quad is heavier then it shoud be for long flight time, and a foxieer razor mini camera
I can’t really speak to your weight issues because I haven’t used those vtx’s or that frame, but I do know that 4s isn’t going to be ideal for long range or even just longer flight times because it has less cells. Also I’m not sure about the packs of connectors you’re talking about. I wish I had more answers but I’m still only 4 months into fpv! Let me know if you end up building the Volador though, that would be so cool!
The receiver will definitely work with those two wires - I left them on for my build with the O3 and Mamba F722. You just have to make sure your ports are sorted out.
Always use smoke stopper after you build a drone and turning it on for the first time it will prevent you from destroying your electronics if you have any short circuits 😅
The RX to TX and Tx to RX is a bit confising. I think of the FC like hooking up an old TV to a cable box, DVD or VCR. The audio and video wires connect to the input on the back of the TV and then to the output on the back of the device. The TX from the originating device (out) goes into the RX (in) on your receiving device. The TX on a given module (out) connects to the RX (in) coming back to the main stack.
Hey I'm just getting into fpv and was thinking about this frame and would like to go with the x style because I would like to do a little bit of freestyle, but I am mainly going to be doing cinematic videos. I am also going to use the o3 unit as my source of video so I was wondering if you could see the props in the view when flying the x frame or if I should do the deadcat frame instead. Thanks, and great tutorial!
yo! thanks for stopping by the video dude! with X version you can indeed see the props. I did a video a little while ago about the Volador 6 inch deadcat that you might want to check out. If you're doing cinematic that's definitely the way to go! Keep me updated if you end up building it!
@@johannrasch6034 it’s not bad. Take’s a little getting used to if you’re new or coming from 4s. My advice is be gentle on the throttle and take it slow until you’re comfortable.
Hehe I'm into build videos and you did a great one here mate👍 awesome production work! Subbed for sure! Come by my channel and check some of mine if you get a chance, although I've been doing tiny whoops recently.
Oh okay that’s a great idea! I had originally done it this way because of a Joshua Bardwell tutorial but that makes a lot of sense. So far I haven’t had gyro problems ever because of that but honestly can’t hurt to do it better
Oh good point I’ll add that to the document!! I never have a need for conformal coating because I don’t fly over water and my quad usually gets killed by impacts long before damage that can be prevented by conformal coating, so I forgot that’s an option! 🙌
@@wyatthumphreys yes but some others may have diffrent flying field & diffrent humidity ,,wet grass,water puddle at bando bla2 and others,,,better to be prevent the shortage/water damage corrosion than spending time fixing/replace esc and gain more filght time,,hehehe,,it just an idea,,very sori sir no offend just some idea
@@zlachannel8674 🙌🙌🙌 no offense taken I’m glad some more experienced fpv people like you are leaving notes in the comments! Also that’s true wet grass is the one thing everyone has in common 😂
@@ergeli oh dang they go from the inssiddeeeee don’t theyyyyyy. Hahahaha that’s awkward I’ll leave a note for that on the doc and hopefully can add subtitles after the fact. Knew I’d miss something thanks for pointing it out!!
@@wyatthumphreys Chris Rosser has a very good video about props in vs out. But essentially his conclusion is that props out makes the quad maneuver better in most situations and protects the camera.
hey dude i’m a new kid to fpv and i haven’t had my first fpv drone only like a 20$ one it wasn’t even a drone basically. i was wondering if i can give away any extra gear or drone you have i know this may be very stupid but ima try🥲🙏🏽.
Thanks for stopping by! To all the advanced pilots, it there’s anything I forgot to mention or did wrong, please let me know in the comments!! Hope everyone has an awesome weekend and I’ll see you next Friday with a much shorter video 😂
Can't believe this guy kept the quality of this video for almost FORTY MINUTES 🤯INSANITY
🙌🙌🙌 hahahaha you’re the best
Agreed!!!
Such a high quality production, and easy to follow build video.
Thank you so much!!! My two goals can now be checked off ☑️
remember me when you hit 100k dude, the video is amazing
Bro if I ever hit 100k that would be totally insane hahahaha. Thanks so much dude you shall be remembered no matter what happens!!
Best volador build and setup on youtube. Well put together.
Best build vid I have ever seen 🔥🔥 I wish I had this when I started
Thanks dude!!!!
Excellent presentation - easily the best on UA-cam, bar none.
Damn that means a lot dude!!! I appreciate that so much
Agreed!
Amazing video, must have taken a lot of time to make this high quality video. For users who build Volador frames, this is simply fantastic.🥳
Thank you so much!!! It really did take forever so seeing you comment that means the world 🙌
Very good tutorial tbh best one I've seen
underrated video
Capacitor ! YAY you showed where to put it !! thank you I was lost since flyfish didn't even show where to put it
Now this is what I call a excellent tutorial.
I just want to know huch much it weights after its built. Thank you
Omg Yea I need to get a scale. All I know if the frame weight at like 190g
Also thanks so much for the kind words!!
@@wyatthumphreys Okay, please tell me if you know more :)
Atta boy look at the numbers on this video!!!
IKR HYPEEEEE
Fantastic Build. Great video🙌🏽🙌🏽
Thanks man!!
Great video and that way of installing the capacitor is exactly what I was looking for before ordering this frame. Thanks for all the insight and great flying 👍👍
Great job on this build video Wyatt keep em coming can't wait to rip with you again in the future
Great video! But wow, that's a very heavy frame! Never heard of it before. Looks cool, but impressed your flight times are as good as you say they are
Thanks man!! Yea it’s perfect for my style which is just straight up murder for most frames. 😂
Thanks for the video! Just got the frame and a friend will help me out building it once all the bits arrive
great video! :D feel lucky that you did this build. Doing my first ever build and majority of my parts are the same! :D. Will be watching this religiously whilst building. Thanks and great video!
Omg NICE
That’s so exciting!!! Thanks for stopping by my vid I hope the build goes well
4k quality looks nice
Im thinking in building this drone when i got the money, 6s for freestyle and 4s if i want a longer flight time possibly make some lipo 4s, frame: source one, motors: xing 2 2207 1700kv, flight controller: speedybee f405, some elrs reciver, foxieer lolipop antenas for video, but here i have a question, if on my googles i have sma, and on my vtx mmcx why there are just packs of 2 with the same conector?, im planning on putting either a 800mw rush vtx, because is light for proximity flights, or reaper extreme 2.5w for long range, but for moment the quad is heavier then it shoud be for long flight time, and a foxieer razor mini camera
I can’t really speak to your weight issues because I haven’t used those vtx’s or that frame, but I do know that 4s isn’t going to be ideal for long range or even just longer flight times because it has less cells. Also I’m not sure about the packs of connectors you’re talking about. I wish I had more answers but I’m still only 4 months into fpv! Let me know if you end up building the Volador though, that would be so cool!
The receiver will definitely work with those two wires - I left them on for my build with the O3 and Mamba F722. You just have to make sure your ports are sorted out.
Cool build! Excellent flying!
Thanks man!!
Wow Man, saw your intro and subbed straight away, looking forward to your build 😊👍🏻
Always use smoke stopper after you build a drone and turning it on for the first time it will prevent you from destroying your electronics if you have any short circuits 😅
The RX to TX and Tx to RX is a bit confising. I think of the FC like hooking up an old TV to a cable box, DVD or VCR. The audio and video wires connect to the input on the back of the TV and then to the output on the back of the device.
The TX from the originating device (out) goes into the RX (in) on your receiving device. The TX on a given module (out) connects to the RX (in) coming back to the main stack.
Big Up ! awesome tutorial def the best one out there for this frame ! Thanks for making this video !
Hey I'm just getting into fpv and was thinking about this frame and would like to go with the x style because I would like to do a little bit of freestyle, but I am mainly going to be doing cinematic videos. I am also going to use the o3 unit as my source of video so I was wondering if you could see the props in the view when flying the x frame or if I should do the deadcat frame instead. Thanks, and great tutorial!
yo! thanks for stopping by the video dude! with X version you can indeed see the props. I did a video a little while ago about the Volador 6 inch deadcat that you might want to check out. If you're doing cinematic that's definitely the way to go! Keep me updated if you end up building it!
Damn... second like :D Okay Im following along now
Yo!!!! Heck yea man!
Also, it takes a very brave man to show their soldering on the internet.
@@lionelttl lmao I am so nervous about it 😂
great job man! thank you
Wow! So helpful! How long did this take you?😱
I’m so glad it’s helpful!! It took two whole week!! 💀
i just wanna know the price
Amazing tutorial helped me so much!
Also YABADABADOOYA😂
Kick ass intro‼️
nice build. do you get props in view on the Gopro?
Nice video man. I fly 2407 1750kv on 6s. You should give them a try.
Thanks!! Yea my main go to motor is 2406 1950kv usually and I lovveeee them. The torque you get with a bigger motor is pretty freakin fun
@@wyatthumphreys holy crapoly that’s a beefy boy. I will definitely have to give that a try in a future build.
@@VinM817 dude yesss you’ll love them
Well I’m just scared of 6s
@@johannrasch6034 it’s not bad. Take’s a little getting used to if you’re new or coming from 4s. My advice is be gentle on the throttle and take it slow until you’re comfortable.
Hey bro, what exactly are those props? Great video, thanks in advance
Great vid and even greater flying skills. But how much does it weigh tho, with full set up and gopro?
Thank you soo much.
Good review..I subscribed :)
When you talk about DJI controller do you mean the fpv controller or any DJI RC controller?
DJI fpv controller 2.
Super good😊 tutorial but I want to now where I can get the goggles and controller can you maybe link them in my comment😊
Awesome, great job....
Hey do you know where I can get the xd60 connector with the red and black cords
What kind of remote can I use with that receiver
great stuff!! how long the flight time with it !!
if you'd upgrade the motors what would you choose ?
good job
what are the list of parts, each of them?
How much flight time so u get ?
DO NOT PUT ELECTRICAL TAPE OVER DJI O3 AIR UNIT
Your gonna block all the airflow inside its gonna over heat
Yabadabadooya
Ur absolutely insane ❤️
Hehe I'm into build videos and you did a great one here mate👍 awesome production work! Subbed for sure! Come by my channel and check some of mine if you get a chance, although I've been doing tiny whoops recently.
The wire of the capacitor on the top of the fc is a bad idea..It will vibrate and perturbate the gyro....you should put them under de 4in1 instead....
Oh okay that’s a great idea! I had originally done it this way because of a Joshua Bardwell tutorial but that makes a lot of sense. So far I haven’t had gyro problems ever because of that but honestly can’t hurt to do it better
it will blew off when get water splash or some steel dust due to no conformal coating
Oh good point I’ll add that to the document!! I never have a need for conformal coating because I don’t fly over water and my quad usually gets killed by impacts long before damage that can be prevented by conformal coating, so I forgot that’s an option! 🙌
@@wyatthumphreys thank you very much sir
@@zlachannel8674 hahahaha that’s gonna save somebody’s stuff and they’re gonna be the ones thanking you
@@wyatthumphreys yes but some others may have diffrent flying field & diffrent humidity ,,wet grass,water puddle at bando bla2 and others,,,better to be prevent the shortage/water damage corrosion than spending time fixing/replace esc and gain more filght time,,hehehe,,it just an idea,,very sori sir no offend just some idea
@@zlachannel8674 🙌🙌🙌 no offense taken I’m glad some more experienced fpv people like you are leaving notes in the comments! Also that’s true wet grass is the one thing everyone has in common 😂
how much is the done by itself
The silicone damper is mounted in the wrong direction.
Oh no!! The one under the arms??
Okay just double checked and the one under the arms is correct at least but which one are you referring to?
@@wyatthumphreys Cam silicone damper
@@ergeli oh dang they go from the inssiddeeeee don’t theyyyyyy. Hahahaha that’s awkward I’ll leave a note for that on the doc and hopefully can add subtitles after the fact. Knew I’d miss something thanks for pointing it out!!
May I know the cost of this drone?
For just the drone it is around 550 dollars :)
@@wyatthumphreys Is it possible to get a drone within 100 dollars?
@@user-tf3ul4wi4w no most ready to fly kits are more expensive. But you can get a simulator and practice while you save up!
@@user-tf3ul4wi4w it’s much cheaper to buy a tinywhoop and also more beginner friendly
@@johannrasch6034 what will be the cost of a tinywhoop?
There is no advantage to having props in.
Should I have put props out? I was indecisive about that and would love to hear why!
@@wyatthumphreys Chris Rosser has a very good video about props in vs out. But essentially his conclusion is that props out makes the quad maneuver better in most situations and protects the camera.
@@ExplorewithZac the protection of the camera seems like a huge advantage
Yeah especially when you're running O3.
Horrible prapwash 😂
hey dude i’m a new kid to fpv and i haven’t had my first fpv drone only like a 20$ one it wasn’t even a drone basically. i was wondering if i can give away any extra gear or drone you have i know this may be very stupid but ima try🥲🙏🏽.