The password choice is the final setting in the series, if you would have hit the power button and held it till it all turned off all the settings would have remained without the need of a password. On the x20 and the x21 the password setting is an issue. It will never affect the settings that you shows if you just hold the power button and get through it. By changing the wheel size does not increase the speed of the bike it'll show different numbers because you use that to calibrate the speed with the GPS on your phone but it does not make your bike faster, it will show higher or lower mph speeds based on your choices, but it's just used to calibrate an accurate mph reading on your display. The settings that make it faster are the current choice (25), voltage choice in the highest bar (up to 52V), and a kph choice where you bump it up to 60kph. There is another setting where you eliminate the delay as well (- choice), and then another where you use the hand throttle and set it to yes (Y). If you have any questions let me know.
Glad you fixed it I've got some new tyre's on mine innova la2577 better than the ones on the bike thicker knobblies what's the maximum speed you now set in your display
There should be a speed setting in the settings when you hold the plus and minus and go through the p settings. Also changing the tire size I believe on P3 to the max will increase your speed
The password choice is the final setting in the series, if you would have hit the power button and held it till it all turned off all the settings would have remained without the need of a password. On the x20 and the x21 the password setting is an issue. It will never affect the settings that you shows if you just hold the power button and get through it. By changing the wheel size does not increase the speed of the bike it'll show different numbers because you use that to calibrate the speed with the GPS on your phone but it does not make your bike faster, it will show higher or lower mph speeds based on your choices, but it's just used to calibrate an accurate mph reading on your display. The settings that make it faster are the current choice (25), voltage choice in the highest bar (up to 52V), and a kph choice where you bump it up to 60kph. There is another setting where you eliminate the delay as well (- choice), and then another where you use the hand throttle and set it to yes (Y). If you have any questions let me know.
Thank you in advance
Glad you fixed it I've got some new tyre's on mine innova la2577 better than the ones on the bike thicker knobblies what's the maximum speed you now set in your display
I can get it up to 37 mph and yeah I'm happy the sent one. I will get some I think this summer.
@@andrewbailey2925 37 thats good I get 30
@@revparsons3tl did you go into the settings and change the tire size cuz that'll give you an extra couple mph
Have you actually tested against a GPS speed monitor see it is accurate or not what wheel size did you set
is this the 1500 watt bike or 3000 watt bike
Where did you order the display from?
My bike has the same display and might need replaced as well😢
So I contacted the manufacturer. They replaced it for free but I was looking at crusher e-bikes I believe.
I’m about to order one !! How do you increase the speed past 34 mph .
There should be a speed setting in the settings when you hold the plus and minus and go through the p settings. Also changing the tire size I believe on P3 to the max will increase your speed
Sorry to bother u again !! You mean change the tire size physically or there a setting that change the tire size ?
@@jjcashflow3690change the tire settings in display the. Click two inside buttons
you can also do the break trick when bikes off to tk off limiter...u hold the break and turn throttle when bikes off then turn on and it's set