How to fix blind spot sensor for Mercedes E350

Поділитися
Вставка
  • Опубліковано 2 лют 2021
  • How to fix blind spot sensor for Mercedes E350 By Sal from eStarTechs
    More videos available on our Channel and our website
    www.eStarTechs.com
    -------------------------------------------------------
    Editing By NARAM SHAMOON
    ------------------------------
    Found You - Atch / atch-music​
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/_found-you​
    Music promoted by Audio Library • Found You - Atch (No C... ​
    ------------------------------

КОМЕНТАРІ • 32

  • @naramsenshamoon
    @naramsenshamoon 3 роки тому +2

    That’s awesome job Sal, nice Mercedes 👍

  • @wisamisaac3938
    @wisamisaac3938 3 роки тому +2

    Excelente job. That’s really helpful.

  • @dchin7450
    @dchin7450 2 роки тому +1

    where do you find the parts? Is it just a visual to see what parts looks bad? Both of my sensor stopped working on the same day. How likely is both sensors go bad on the same day?

    • @estartechssal6213
      @estartechssal6213  2 роки тому

      Dear
      I got it from a junkyard
      You would have to reset them and try again
      Thank you!

  • @TruCrimeQueen
    @TruCrimeQueen Рік тому +1

    Watching your videos …. My car has the same sensor issue ….after being repaired from an accident. In the morning, I am going to check the sensor - would like to send to you for repair. If I can figure out how to get it out 😖

    • @estartechssal6213
      @estartechssal6213  Рік тому +1

      Dear Cat Cat,
      Sorry for the delay, and the sensor is behind the rear bumper it's a square shape that connected with 2 screws
      please check out the end of the video
      Unfortunately, we don't have a video of how to disassemble the sensor
      Feel free to if you have any questions
      Thank you!
      Sal

    • @TruCrimeQueen
      @TruCrimeQueen Рік тому

      @@estartechssal6213 thanks for the reply. I was waiting for this to check. I replied above. I had another question. 🥴

  • @worldpeace5853
    @worldpeace5853 Рік тому

    What was the part number?

  • @peterwinkler3999
    @peterwinkler3999 2 роки тому +1

    Top and bottom boards are soldered together…so not just pull apart

    • @estartechssal6213
      @estartechssal6213  Рік тому

      Dear Peter,
      Sorry for the delay
      You would have to remove the white plastic cover first then pull the whole modal out after that you can see the connecter soldered to the Antenna you would have to have a desoldering workstation
      Any question feel free to ask
      Thank you!
      Sal

  • @waterlover30
    @waterlover30 2 роки тому +2

    Hi. Thanks for the video. I have a problem with these sensors on my car and would like to get them repaired. Is it possible to have you do the repair and my skills are not as good as yours? Thank you sir! My car is a 2012 R350. The part is a0009050210.

    • @estartechssal6213
      @estartechssal6213  2 роки тому +1

      Dear please let us know which side that has a problem ?
      We are happy to help you

    • @waterlover30
      @waterlover30 2 роки тому

      @@estartechssal6213 Sal, I will tell you what I know. The vehicle began to act very badly. It would not shift the transmission, the windshield wipers came on without being turned on, instrument cluster problems etc. All these things were CAN BUS related. Because it could not be driven I had it towed to the local Mercedes dealer. They did their scans and determined that the problem was the blind spot sensors. I asked that the car be put in a state that it could be driven so the sensors were unplugged and now the car runs great. So, it could be both sensors. Mercedes wanted to replace both sensors and the harness just to be safe I guess. It was a lesson for me that these sensors could cause so many problems and not just shut down if they have a problem. PLEASE TELL ME THE REPAIR COST FOR A SENSOR.

    • @estartechssal6213
      @estartechssal6213  2 роки тому +1

      @@waterlover30
      Hi Andrew
      Yes the sensor will cost you $130 per each
      Payment after fix
      If I can't fix them will send them back with no charge
      Please let me know
      Thanks!
      Sal

    • @larrygirvan3367
      @larrygirvan3367 Рік тому +1

      @@estartechssal6213, Hello, I have a 2014 E350 and the sensor has gone bad again. Are you still repairing these? If so, how do I get them to you? Larry

    • @jakesousa1376
      @jakesousa1376 Рік тому +1

      Hi ​@@estartechssal6213 . I also am in a similar situation. Was told by the dealership it is my left blind spot radar that needs to be replaced. However getting a new part could be months. Do you still offer your services to fix these radar sensors?

  • @edcogan6084
    @edcogan6084 2 роки тому

    How does the sensor come out of the holder? It is blocked on the front and the back and then there is a strap across the top that doesn't move.

    • @iamone2534
      @iamone2534 2 роки тому

      You nees only to pull hard that strap across the top... You cant break don't worry...

    • @thrash1337
      @thrash1337 2 роки тому

      I have the same question, did you figure it out?

    • @edcogan6084
      @edcogan6084 2 роки тому

      @@thrash1337 I didn’t. I haven’t messed with it over the winter. Also, planning on taking it in to get a TSB taken care of at the dealership. There is an error in the door sensor that makes the car think that the blind spot sensor isn’t working.

  • @andreasathanassopoulos8659
    @andreasathanassopoulos8659 4 місяці тому

    Hi , can I send you a radar sensor to repair please?

  • @TruCrimeQueen
    @TruCrimeQueen Рік тому +1

    What if I don’t have the skill to fix the sensor ….do you have a video to show me how to replace it without me having to take it to the MB Dealership?

    • @estartechssal6213
      @estartechssal6213  Рік тому +1

      Dear Cat Cat,
      Sorry for the delay, and the sensor is behind the rear bumper it's a square shape that connected with 2 screws
      please check out the end of the video
      Unfortunately, we don't have a video of how to disassemble the sensor
      Feel free to if you have any questions
      Thank you!

    • @TruCrimeQueen
      @TruCrimeQueen Рік тому

      @@estartechssal6213 thank you for replying. Let me ask ….I go thru the trunk, lift up the carpet and it will be there?
      Or, I go to the outside of the car, look under the bumper?
      Thanks for replying!!!

    • @estartechssal6213
      @estartechssal6213  Рік тому +1

      @@TruCrimeQueen Dear
      If you go under the car and see the sides of the rear bumper
      There are 2 sensors one in left side the other on right side
      Feel free if u need more help

    • @TruCrimeQueen
      @TruCrimeQueen Рік тому

      @@estartechssal6213 thank you so much. It’s been raining here in Boston. When it dries up, I’m going under 😉