Milwaukee M12 Battery Cells Replacement ( 1.4A to 3.0A Capacity Upgrade)
Вставка
- Опубліковано 23 жов 2020
- Patreon - / evcustoms
Channel Support - www.paypal.com/paypalme/evcus...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - Thinking_Of_Us - Наука та технологія
Rumor has it he used the money he saved to buy a new tip for the soldering iron. Good video.
LOL
I thought it was a beat up permanent marker😅
If you are going to solder wire to a nickel strip piece, I’ve found it’s best for me to do so before I spot weld it to the battery, that way I’m not having to heat battery at all along with the strip.
Aggh! Its such a pain to get the cells out of these holders! They now use lots of glue to hold them in. I had to take a pack apart recently as It took a bath and wanted to prevent them from rusting. Had to cut the case to get them out. Thankfully managed to save the pack.
Could you do a video on installing a balancer on a m12 battery? Your videos on the m18 helped me fixed my batteries. But on the m12 ( specifically 6.0mah) i have trouble finding where to solder the balancer...thanks in advance
Thats awesome wish I had tools to do this to mine
Good upgrade, can i use the same driver like a bms for a different 12v battery pack?
My battery!!!Thanks mate.
I wish you could have somehow shown the performance difference between the two.
Спасибо за видео!
Oh ineed to see if you have a diy of that tack welser
What you could’ve done to avoid forcing it in there is you could’ve tacked the batteries inside the holder that way they could be in perfect place
Nice job
You didn’t check the cells initially to ensure they’re balanced before welding them together??
Was about to say first battery picture was bad... if thats what actually comes in it. Makes me wonder for the drill/impact/hackzall will all push 30+ amps.
I'd appreciate it if you could share the link where you got the cells from. Thank you
Def upgrading my dead 6ah packs
I want to know how to make that mini spot welder.
i want to check my battery because I had a two led turn on this problem is the battery o charg
Buen video
Very nice. Thank you.
Los pines grandes es positivo y negativo. Y los 3 pines pequeños para que sirven??
Is the PCB the same between the 1.4ah and 3.0ah batteries? Nothing limits the new batteries from the higher discharge rate?
Something is regulating the battery discharge current. Might be the pcb, might be the motor driver/ speed controller within the tool. Having a higher current capable battery is simply going to help with heat and voltage sag
The limiting resistance in the drill remains the same.
Ah is a measure of capacity not Max discharge current, that's just the current if the battery and it's a lot higher than 1.4 or 3 amps. Ie 1.4 ah is 1.4 hours@1amp.
BOM DIA SOU DO BRASIL COMO COMSIGO O ESQUEMA DO CAREGADOR M12 DA MILWAUKEE
Beautiful
Do you know what gauge wire are the main leads? Bought a kit off eBay for diy, but the leads are 18AWG, not sure if they can handle the high current output.
For a short run that will be fine. Resistance is calculated by the length and the gauge. If it's only say 6 inches long it can carry more current than normal.
Great instructional video. However, I'm a bit perplexed bcuz when you tested for the voltage, it read: 10.92v.., isn't this supposed to read: 12v..?
Mine XC 6.0 M12 battery reading 8.1 V when fully charged
This doesn’t make any sense
So the temp sensor is on the pcb...? On my bosch 12v pack, there is a small probe going down between the cells, and no balancing wires (don't know if the cells themselves have a voltage cutoff).
Iimit.
The ceĺl themselves do not have any protection. The thermsistor is under board, connected to PCB via wire. There is no true balancing in a pack. Tools and charger are there for temp control and voltage limits.
Now do a 21700 cell 6 AMP battery for the M12 FUEL
Well done... I am looking for the best bms battery 48v 13s 22a what you advise me Thank you very much
￡11.05 16%OFF | 48V 13S Power Wall 18650 Battery Pack 13S BMS Li-ion Lithium 18650 Battery Holder BMS PCB DIY Ebike Battery 13S Battery Box
a.aliexpress.com/_97wEtC
Maybe over-volt 14s
￡12.13 15%OFF | 52V 14S Power Wall 18650 Battery Pack 14S BMS Li-ion Lithium 18650 Battery Holder BMS PCB DIY Ebike Battery 14S Battery Box
a.aliexpress.com/_ALYIma
@@johnrhodes3350 thank you very much
Hi so I did a rebuild on one of Milwaukees M18 12.0HD batteries because it up and quit working and wasnt even that old. It was just dead and when I went to recharged it it was flashing green and red on the charger. So I ordered 15 new samsung battery cells, same as the ones that where in their, then went to town spot welding new tabs on and putting everything back together. Now a couple connections came off of the cercuit board so I soldered them back on. Once everything was put back together I pressed the battery guage button and nothing lit up. I put it on the charger and the green light lit up and said it was fully charged. Now heres the thing I dont get, I plugged it into a tool and it lights up all the indicators but wont run the tool. I tested everything with a volt meter and the cells are each saying 3.441 consistently, and the battery pack itself is reading 17.22 volts. Im stumped. Can you please help me?
Don't go by the green charging light to troubleshoot. What's the output voltage at the battery terminals?
how did you make your welder
Microwave my friend..
Có mạch pin rin không
Can I do this without a spot welder
No. I have tried. Soldering onto the battery cell will make it leak and just using tape/epoxy to hold the wire on is very bad as it can short out or cause high resistance. I have tested both and both have happened!
Am I the only one without a battery terminal spot welding machine ?
Why did you put kapton tape around the batteries' top and bottom?
Hi... kapton tape is for high temperature insulation between batteries.. (protection from shorting)
@@EVCustoms Yes, I know but what does it protect around the top and bottom? There is already insulation there.
like that i give some distance between them about 0.4mm, the factory insulation didn't give you any serious protection, they are melting at low temperatures and easily can cutted by single hit, and results shorting the batteries.. kapton tape can give more serious protection, can hold at high temperatures and they have more strength..
How do you make an m12 1.5 amp into 3 amp. Special batteries?
SONY High Drain VTC6 batteries..
Are these considered 3s?
Yes 👍
and where can we buy the welding machine,not everyone has one at home,and add the cost of long strip of nickel strip that you only have to use 2 inch of it,roll of heat resistance tape that you only used a foot of it,and those gaskets,where is the saving? don't forget the batteries too
why don't you put the link for each one so can find out how much it cost?
❤
Ryobi or someone needs to make a battery powered welder thingy he uses here. Ide buy one.
There are videos here on UA-cam that show you how to use parts from an old microwave to make a spot welder to use on these batteries. I cannot vouch for them but there are a number of videos that seem to show them working just fine.
@@DoctorVdW I believe it. A microwave transformer can easily kill you lol.
You were right to say, Ryobi, they bought us out, (Milwaukee), some years back. lucky I had left before the merge buy-out.
Wouldn't more than doubling the current halve the life expectancy?
Not if the cells are designed for a higher output current, not to mention whether the tool will ever request that amount of current.
The BMS is in the tools for M12. I believe they will never request more amps than what the cells are rated for
If your charger is flashing green and red, try unplugging it. Obvious, but it wasn't the first thing I tried, but it was the last. The Milwaukee Fuel system is more complex than dumb chargers.
The information on the screen is too small to read where you get them from
And there is a dreadful sound running continuously, so we cannot hear anything that he says.
Wish you went slower. I'm building one from scratch w/o the original bat but a kit from alie with no instructions. I used legit new Samsung inr18650-25r cells from 18650 battery store
Sony 18650 VTC6 is a great choice 👍
Yeah... nice bayteries!
what is better about the VTC6 vs the Molicel P26A?
In my opinion, not much. The Molicel is a good cell, and less $$. Sony makes a good cell, I don't use them because of cost. I'll go Samsung, Molicel, EVE, LG...
Too bad he won't be able to get those out to replace them again lol
There is no way that you worked that hard to put the repaired cells into the case before TESTING the module on the bench. Seriously?
Hi... do not worry about it, all my new batteries was tested with full capacity on rated currents.
Milwaukee vs Sony VTC auto Best
Random comments are random. Thank you for being irrelevant.
...after watching this video I decide buy a new battery. your video is great but it's not my cup of tea.
Yeah, that's never coming out again! You should take some of the money you saved on not buying a new battery and invest in a new soldering iron. That has to be the worst looking iron I have ever seen in my life.
The iron didn't stop working my friend... you will understand me if will be in my situation...
Kind of Dangerous with the knife.
good video. Turn the sound off and you won't go crazy listening to repetitive music over and over and over and over. Would have been nice to see at the end the charger actually turn the light green once fully charged or does it not ever turn green since this is an altered device now. It would be helpful to know that.
That's not a true Milwaukee battery
And this is why these batteries are so expensive, even if they are made in China using slave labor and they are...those uighurs in the concentration camps in China are making these ... imagine the costs if they had to pay honest labor
No thanks I'll just buy a new one
It's not that big of deal. Pure nickel is cheap, you aren't buying cheap Chinese junk and your paying less money. I have a little $70.00 Seesii 10000mAh , 99 gear spot welder. No more 3Ah packs, they are all 5Ah packs. No more 12Ah packs, use the new Samsung 50e 21700 and you have 15Ah at a very reasonable price. I've rebuilt 8 of my packs and maybe 25 other packs for people. Everything from NiCD 19.2V Craftsman, Dewalt, Black and Decker, Mikita, Ryobi and Snap On.
This is a modification failure, only 10.6V after replacing the batteries, but the tool gauge shows only two bar full and charger refuses to charge it up. The circuit broad has protection to prevent you use higher ampere batteries. Let's buy the knock off batteries rather than put high quality lithium batteries into the old shell. Not worthy at all.
What are you talking about?
1) 10.6V is right in between charged (≈12.6 V) and discharged (≈9 V), so 2/4 bars are right for ≈45% charge. edit: In the video it actually showed 10.91V (at 14:55), which would equal more to a ≈50% charge, for which 2/4 bars are still correct.
2) He only put the battery into the original charger to show it is charging (I don't know where you see the charger is refusing to charge it; both red and green LED would have to be blinking), and then into the tool to show the battery works.
I've repaired 2 Ah M12 battery myself and there are no issues with using higher mAh spec 18650s than the original, and when the original has dead cells, why the hell would I be buying aftermarket knockoff to do a rebuild?
When he soldered the replacement batteries, they were only half charged. That is how they are shipped for long-term storage. If you store them fully charged, then the chemistry degrades and shortens overall lifespan at a faster rate
Also he used very good quality replacement cells Sony VTC6
High capacity and high continuous discharge current
The continuous red light shows it is charging ok
Green is Finished charging
Flashing Red is Error
10.6 Volts is the nominal median voltage that the cells are stored or shipped at. 3 x 4.2V = 12.6V = Full
This a comment failure. Dumbest comment so far. Absolutely nothing that
香港豬公 wrote was correct.
What are you on about? Sony VTC6 are excellent cells.
I have a feeling you have a stake in those knock off batteries 😂
Can you fix schematics for 6 Ah battery, the one I have found at sellers site are wrong?
i.ebayimg.com/images/g/-OUAAOSwERdgSZW~/s-l1600.jpg
❤️