Here you can see the products which i used in this video BAT420 Li-ion Battery Plastic Case s.click.aliexpress.com/e/_DBk... Li-ion battery s.click.aliexpress.com/e/DYGUf6ne Rechargeable Battery for BOSCH 6.0Ah Li-ion BAT 420 BAT411 BAT412A BAT413A s.click.aliexpress.com/e/_DDq...
I know this is an old video. But what exactly did you do at 9:20 mark? How did you connect the negative of the top cell with the BMS negative? Did you use a small cable? You cannot solder the thick welding strip to a small part on BMS without touching other components?
Hello From the bottom battery I came with a cable and for the top one I used the tape from the battery, I joined them both on the bms The area where the strip with the negative from the top battery comes is free, on the bms there is no circuit other than minus, it has nothing to short circuit. You don't have to do exactly what I did, if you have another idea
Hello It also depends on how much money you have, you can buy from the professional or hobby range. If you don't use it intensively, you can buy any brand at any voltage
So I was needing a fix for dremel 3800 same attery as the bosh standard got on the Samsung 40t and I got 3 so 3100 Mah seem worth it 6k for that bottom brick I like it but swinging that all day might get ya tired tho
Hai This BAT420 contains 6 batteries that have 3Ah with 4 Volts 2 batteries in parallel forming a package of 6Ah and 4 Volts.Then the 3 packages in series result in 6Ah and 12 volts. Volts break a motor, not amperage. The higher amperage will bring you more autonomy. Higher voltage can burn the motor.
Hello, collected the battery according to your video, on outputs 12V but the drill does not work, the charger sees the battery and charges it but the drill does not. please tell me what could be the problem?
@@angreenbird Probably low continuous max discharge cells. For power tools, cells should be 20amps minimum. Good choice would be Samsung 25r. Regular Batteries with rating of 5C below will not work for sure.
Where you find 4Ah batteries? On Aliexpress? It's fake. Maximum volume of 18650, that i know - 3.4Ah and it's not high output batteries. Typical volume of high current cells - 2.5-3.0Ah.
@@CMCdiy То есть в рукоять их поместится только две, правильно? Тогда 4 вынести по подобию шестиамперного аккумулятора. Платы для выравнивания тока и защиты от перегрева самому придётся искать кто изготовить? Я, к сожалению, в транзисторах, резисторах и тому подобном не разбираюсь.
Why? There shouldn't be a problem, as long as the voltage remains the same and the cells can provide the required power without excessively heating up.
Here you can see the products which i used in this video
BAT420 Li-ion Battery Plastic Case s.click.aliexpress.com/e/_DBk...
Li-ion battery s.click.aliexpress.com/e/DYGUf6ne
Rechargeable Battery for BOSCH 6.0Ah Li-ion BAT 420 BAT411 BAT412A BAT413A s.click.aliexpress.com/e/_DDq...
Hola en donde compraste el kit, yo quiero uno para mí Makita 12volts. Gracias y saludos desde CDMX.
Thank you for the video. Very well made and easy to follow through. I made myself one with LG 18650MH1 and it works fine.
I know this is an old video. But what exactly did you do at 9:20 mark? How did you connect the negative of the top cell with the BMS negative? Did you use a small cable? You cannot solder the thick welding strip to a small part on BMS without touching other components?
Hello
From the bottom battery I came with a cable and for the top one I used the tape from the battery, I joined them both on the bms
The area where the strip with the negative from the top battery comes is free, on the bms there is no circuit other than minus, it has nothing to short circuit.
You don't have to do exactly what I did, if you have another idea
Great Job Done Sir
Where get we found This casing and cell to update Bosh drill
3 to 6 cell
Hello, I would like to buy a cordless screwdriver and drill for my needs, do you have any advice on which one to buy?
Hello
It also depends on how much money you have, you can buy from the professional or hobby range.
If you don't use it intensively, you can buy any brand at any voltage
So I was needing a fix for dremel 3800 same attery as the bosh standard got on the Samsung 40t and I got 3 so 3100 Mah seem worth it 6k for that bottom brick I like it but swinging that all day might get ya tired tho
Does Makita 10.8v have this type of battery case?
3 battery 12v to 6 battery 12v nodefine drill motor can damage or can not damage
Hai
This BAT420 contains 6 batteries that have 3Ah with 4 Volts
2 batteries in parallel forming a package of 6Ah and 4 Volts.Then the 3 packages in series result in 6Ah and 12 volts.
Volts break a motor, not amperage.
The higher amperage will bring you more autonomy.
Higher voltage can burn the motor.
@@CMCdiy TQ sir
I have bosch Wireless Drill cam with 10.8 V 1.5 Ahm can i used 12V 3 Ahm battery 🔋
Can we just use normal solder instead of spot welding? Tq your video really helpful
You can but it is not recommended for the batteries. If you do it though, do it quick to not heat the batteries too much.
Can you open the electronic board bcp and fix it We want a video of that
No caso aí melhorou o amperes e watts?
Very useful video! 👍
Glad you think so!
Nice, interesting project. Like
Bos dimana beli bahanya batri lengkap kesing batrai
Sir 12v?
Спасибо,посмотрев видео,смог разобрать свой не рабочий АКБ Bosch-12v 4Ah,сгорел предохранитель.Можно ли использовать АКБ без него?
pero esta mal la conexion de celdas, 2 baterias 2 paralelos y 1 solo. no dan 10.8v ????
Helpful video 👍
Thanks 🙂
Hello,
collected the battery according to your video,
on outputs 12V but the drill does not work,
the charger sees the battery and charges it but the drill does not.
please tell me what could be the problem?
hi
check the connections again. normally it should work
I have same problem. Did you solve it?
@@angreenbird Probably low continuous max discharge cells. For power tools, cells should be 20amps minimum. Good choice would be Samsung 25r. Regular Batteries with rating of 5C below will not work for sure.
Hola
Donde puedo comprar el kit ??
Can i use lithium batteries?
Great... Like the illustrations along the video.... Regards
I made two of these but the bosch charge wont charge the non-original battery. Have you experience the same?
Hello.
I didn't have this problem.
the PCB with temperature sensor is identical to the original one
great and nice easy to understand video. love it.
Donde puedo conseguir todo eso yo tengo la batería normal
puedes encontrar la batería llena en la descripción del video
Can I use the Bat420 for GSB Bosch drill?
If it's a 10.8V or 12V Bosch Professional (Blue) drill, then yes. If it's an 18V or Bosch DIY (Green) one, then no.
Is this so 6ah?
Super.. Merhaba kutuyu nereden satın alabilirim.
I try this and the battery is working good but there's an issue, the battery is not charging..
Very good
Thanks
Привет
Ты собрал без BMS?
BMS в оригинале тоже отсутствует.
Amazing
Thanks for the information
Bang beli lgs jadi kayak rakitan abang apa ada bang makasih
Bisa pesan gak bos
You can find it in the description
Bisa pesan tempat batraynya gak mas
It’s below, not bellow which is a loud shout! Cheers
i personally would have replaced the 3 2amp cells in the small battery with 3 cell 4amps and i would have got a 4 amps battery in half the size.
Where you find 4Ah batteries? On Aliexpress? It's fake. Maximum volume of 18650, that i know - 3.4Ah and it's not high output batteries. Typical volume of high current cells - 2.5-3.0Ah.
grrrreat work.. wonderful
Nice!!
Thanks!
А если на 21700 собрать?
The 21700 cells are also very good, but they do not fit in the case because they are much thicker and longer
@@CMCdiy То есть в рукоять их поместится только две, правильно? Тогда 4 вынести по подобию шестиамперного аккумулятора. Платы для выравнивания тока и защиты от перегрева самому придётся искать кто изготовить? Я, к сожалению, в транзисторах, резисторах и тому подобном не разбираюсь.
music please?
Привет! У тебя не подключена одна банка в торце. Проверь.
не. Мне кажется
👨🎓
ok 🤗
It distroy your motor.
Why? There shouldn't be a problem, as long as the voltage remains the same and the cells can provide the required power without excessively heating up.
I like licking 9v batteries