Good job Fernando! I know there's always pressure to get it done as fast as possible, but I can tell you take pride in your work and do it right. Though the pressure is there to get it done fast, you're blessed to work in an install bay that has the tools and product to do the job right...and Dean as part of the team to learn from. I see big things in the industry for you in the future.
I run the KRX in the front for 200w, KRX in the rear for 160w and 2x EKX30 subwoofers for 1600w in the cargo area, powered by a Rockford Fosgate 500 4 ch, and a Rockford Fosgate 1200w Mono. I sit in each part of the car to ensure everybody gets the loud and crisp response that can be tweeked as I go, to get that perfect, as I call it, noise. At 61yo I recon I still got it. Focal are awesome
Finally something close to what I have in my Raptor. I didn’t have good luck with the navtv zen a2b so I when high level into a audio control D6.1200 full active for mids and highs and a lc 1.800 for the sub.
Thank you for Posting All the New Info about the Audio System Version.... this might be why I Aquired a Signal noise at a Very Low Volume from Factory Head Unit on a 2019 F-250 after using the PAC piece
I think a lot of people are going to jump on the new Ford Maverick small truck, which also has a B&O option. Would LOVE to see you guys do a system in that vehicle as soon as one is available!!
What where the actual door speakers wire colors ? And did you actually cut them at the kick panel and connect yours ? You are the only ones that have explained how complex the door grommets are and alternative , seen some videos of them drilling out parts of the door connection grommets to run wire thru
Good morning. Blessed day to ya. Those are going to sound amazing. God I wish I could spend money on things like Focal and road kill all over.... Beatiful job. As usual. Cant wait to see the rest of the install....
hey.. i notice that when you deadening a door... you leave some of the area open... cz as far as i know it should be sealed to have a better midbass response... anyway just saying...
Man i wish i was closer to your shop so you could do my raptor. Where can i get a 4 8" Kicker L7 box like that? maybe ported if possible. Do you know of any shops in the NC area that you would recommend.
I wonder about that giant access hole in the doors and what they do to the sound. Don't they act as giant way wrongly sized port openings? And with that plastic covering that opening, does anyone ever get noise or flapping sounds from it?
The 6.5s aren't producing enough mid bass or bass in general for it to flap or anything like that. Even if it did act as an enclosure there is too much airspace in behind the door, therefore it is considered free air. Those fast rings do help though. That pad in behind absorbs most of the back waves from the speaker. Also, I believe those speakers would be crossed over at maybe 80hz. But even then, they are not designed as subwoofer style 6.5in speakers. Therefore the bass would be minimal so no weird flap from the weather seal. Sorry if this was long winded Haha!
Quick qestion for you guys. I have 2019 Raptor with B&O sound system. I am collecting all parts of new system. Focal K2 in doors , 2 JL 8" subs, ZEN .... my question is what amp should i go with to run whole system and what else do i need?
If I have a Toyota Avalon, Lexus ES, Nissan Maxima, I would put in a really nice SQ system with the double premium treatment with not only full sound treatment on the doors, tweeter and midrange pods, door cards, and parcel shelf but also sound treatment on the floorboards, and trunk. I would get 2 IB 18 inch subs, speakers that are up 2500 dollars a pair that have a dark but very refined sound, ring emitter transistor amplifiers all around including the subwoofers no class D allowed, a DAP player, mosconi aerospace or Helix DSP. I want to have time alignment settings for multiple drivers and a center time alignment if a passenger is riding with me.
How do these Focal K2 sound compared to the Focal Plug'n'Play IS690TOY you used in your video lately? I mean they cost a third (150 vs 450 Euro)... Is it a huge difference? ua-cam.com/video/YjEKZjAS-6c/v-deo.html
master fabricator those Adapters usually are Crap !!!! Leave those for BestBuy , Circuit City chain stores ... I Always Cut the Plug about 2-3” back and Save them . After that Solder leads to Every speaker we Install and then use Red butt connectors to make Final connection
I never had a issue with them we always left the oem plug on and stripped and soldered a few inches back just zip tied the orm connector to a OEM harness
Good job Fernando! I know there's always pressure to get it done as fast as possible, but I can tell you take pride in your work and do it right. Though the pressure is there to get it done fast, you're blessed to work in an install bay that has the tools and product to do the job right...and Dean as part of the team to learn from. I see big things in the industry for you in the future.
That angle on the 6x9 placement in the front door is quite nice. Have to give Ford some credit on that anyway.
That thing is going to sound fantastic. I cannot wait to see the factory integration.
I run the KRX in the front for 200w, KRX in the rear for 160w and 2x EKX30 subwoofers for 1600w in the cargo area, powered by a Rockford Fosgate 500 4 ch, and a Rockford Fosgate 1200w Mono. I sit in each part of the car to ensure everybody gets the loud and crisp response that can be tweeked as I go, to get that perfect, as I call it, noise. At 61yo I recon I still got it. Focal are awesome
Those side steps really help Fernando when he is doing the doors.
Just ran stinger speaker wire thru the doors of my 18. It was a pain but so satisfying. It's different when you have all day to do something.
Steph Menard how?
@@g3ninfinite i poked new holes in mine.
Finally something close to what I have in my Raptor. I didn’t have good luck with the navtv zen a2b so I when high level into a audio control D6.1200 full active for mids and highs and a lc 1.800 for the sub.
Thank you for Posting All the New Info about the Audio System Version.... this might be why I Aquired a Signal noise at a Very Low Volume from Factory Head Unit on a 2019 F-250 after using the PAC piece
I have an RP-2000.1D coming in the mail as an upgrade to my current setup. Things are about to get slap-happy!
Those RP series amps have a tendency to get warm to the touch. Make sure it can breath
I think a lot of people are going to jump on the new Ford Maverick small truck, which also has a B&O option. Would LOVE to see you guys do a system in that vehicle as soon as one is available!!
I have a Focal SB27 in my trunk running on a JL 250/1 and the fucking thing absolutely hammers. Focal makes some serious gear.
What where the actual door speakers wire colors ? And did you actually cut them at the kick panel and connect yours ? You are the only ones that have explained how complex the door grommets are and alternative , seen some videos of them drilling out parts of the door connection grommets to run wire thru
Good morning. Blessed day to ya. Those are going to sound amazing. God I wish I could spend money on things like Focal and road kill all over.... Beatiful job. As usual. Cant wait to see the rest of the install....
Awesome video
hey.. i notice that when you deadening a door... you leave some of the area open... cz as far as i know it should be sealed to have a better midbass response... anyway just saying...
Fernando, how did you get that monster of a truck in the bay.....lol. He is going all out with that equipment, good to have that kind of coin.
Great work, bravo!
I foresee the sub amp upgrade in a future episode.
200w to the mid? Crutchfield lists the set as 100w. I would think that meant 100w per 6.5 and tweeter.
I've missed these videos
Man i wish i was closer to your shop so you could do my raptor. Where can i get a 4 8" Kicker L7 box like that? maybe ported if possible. Do you know of any shops in the NC area that you would recommend.
Best team
I wonder about that giant access hole in the doors and what they do to the sound. Don't they act as giant way wrongly sized port openings? And with that plastic covering that opening, does anyone ever get noise or flapping sounds from it?
The 6.5s aren't producing enough mid bass or bass in general for it to flap or anything like that. Even if it did act as an enclosure there is too much airspace in behind the door, therefore it is considered free air. Those fast rings do help though. That pad in behind absorbs most of the back waves from the speaker. Also, I believe those speakers would be crossed over at maybe 80hz. But even then, they are not designed as subwoofer style 6.5in speakers. Therefore the bass would be minimal so no weird flap from the weather seal. Sorry if this was long winded Haha!
always great work !
Just drill a hole through the door molex connector. Not hard
Why do you put the roadkill on after you mount the speaker bracket? Is there any advantage to doing this rather than putting the roadkill on first?
Love your videos, Can you just replace the door speakers without using the zen1 on a B&O F150 audio system?
I put the fast rings in my G6.... then I see this. Don't cut the front, cut the back... to notch it for the bar in the door. GRIPES!!!
Nice video!
How much that all cost
wow sick system. I myself have that same truck & would love to know what it would cost me to do that to my truck ????
AWESOME! THANKS!!
Quick qestion for you guys. I have 2019 Raptor with B&O sound system. I am collecting all parts of new system. Focal K2 in doors , 2 JL 8" subs, ZEN .... my question is what amp should i go with to run whole system and what else do i need?
Wonder how much total cost is for install and equipment is.
What brand and size for these k2s speakers@?
How long did dad job took
how long have the 4 self-speaking branches been? from 16 or from 20?
What does Fernando drink in the morning? He sure moves fast! Lol awesome job as always!
Hoppy's junkyard rally Coca-Cola....all day everyday.
@@haileyb.6652 hey me too! I like your new back pack by the way😁
Hoppy's junkyard rally haha thank you!
What is the price of this set up?
If I have a Toyota Avalon, Lexus ES, Nissan Maxima, I would put in a really nice SQ system with the double premium treatment with not only full sound treatment on the doors, tweeter and midrange pods, door cards, and parcel shelf but also sound treatment on the floorboards, and trunk. I would get 2 IB 18 inch subs, speakers that are up 2500 dollars a pair that have a dark but very refined sound, ring emitter transistor amplifiers all around including the subwoofers no class D allowed, a DAP player, mosconi aerospace or Helix DSP. I want to have time alignment settings for multiple drivers and a center time alignment if a passenger is riding with me.
As factory things go, how was the stock system performance? Drooling into the morning coffee cup at what's going in.
What'd you guys do before fast rings to achieve the goals of fast rings
Weatherstripping foam
My rp 2000.1 hammers , pushes 4 8" vvx v3,
About how long did this whole install take?
No more “good Sir...”
do you use OFC speaker wire or CCA??
OFC
Off always
killnzombies 1000 stinger select wire is cca
Why can’t you be located in my area :(
why for?
Five Star Bikini Car Wash !! Watch how much money yous make and views
How do these Focal K2 sound compared to the Focal Plug'n'Play IS690TOY you used in your video lately? I mean they cost a third (150 vs 450 Euro)... Is it a huge difference? ua-cam.com/video/YjEKZjAS-6c/v-deo.html
You losing weight dean?
Did Fernando really chop the plug off a new raptor because the customer was to cheap to buy the adapter 😳
master fabricator those Adapters usually are Crap !!!! Leave those for BestBuy , Circuit City chain stores ... I Always Cut the Plug about 2-3” back and Save them . After that Solder leads to Every speaker we Install and then use Red butt connectors to make Final connection
I never had a issue with them we always left the oem plug on and stripped and soldered a few inches back just zip tied the orm connector to a OEM harness
master fabricator everyone has there way of doing things
very poor application of deadening material
Thumbs down for making me watch 2 ads at the beginning.