I just finished a full size double din install on my 2004 Ram. What a pain. If someone is looking to do the same, get the shorter depth double din. That would've been much easier. Nice instructions. More emphasis on cutting the top out would of been helpful. Thanks for the video.
Thanks Sam, the two vids on radio and cluster were very helpful . I want to upgrade my 2004 Ram 1500 Laramie radio to touch with android.. this helps the 2din vs 1 din debate in my head. Plus my PRNDL indicator goes out now I can take that cluster out and find out why its so hot to touch the back of it... Wish me luck- your vids are helpful- Doug
For your ac climate control panel how did you install the blue lights? Are they bulbs that you twist in like the dash or do you have to sauder them in?
I wired mine up the same as this and have no sound to any speaker. Even marked what black and yellow to use. Same truck 04 with infinity sound. Any ideas what I did wrong?
I see you have dual climate control how do you replace the lights in the back? I have bulbs that are out and the I can’t find a replacement. I figured I would replace the bulbs then.
You have to solder them in It’s a lot of work but worth it You have to remove the bulbs from the plastic holders that they come in so it’s just a bulb with two wires coming off it
@@samswildgarage8805 I just had a local guy install a double din pioneer and 4 door speaker's in my dodge ram 1500. It has infinity audio and he's telling me the only way my radio will work is if I have a pac roem-chr...my audio doesn't work and he said he need the pac roem-chr to by pass it...is this true and how do I rectify the problem if not?
yes but you need an adaptor so any radio that has a remote plug on the back of it can be made to work with the steering wheel controls i just have not done it yet because i plan on installing a 4th gen steering wheel so i'll get the adaptor for that. subscribe to my channel i'll be doing a video on the steering wheel install and radio interface in the next month
I just finished a full size double din install on my 2004 Ram. What a pain. If someone is looking to do the same, get the shorter depth double din. That would've been much easier. Nice instructions. More emphasis on cutting the top out would of been helpful. Thanks for the video.
ya sorry
i thought of making the video after i had already installed it
How you install double din with infinity system
Stock infinity
Thanks Sam, the two vids on radio and cluster were very helpful . I want to upgrade my 2004 Ram 1500 Laramie radio to touch with android.. this helps the 2din vs 1 din debate in my head. Plus my PRNDL indicator goes out now I can take that cluster out and find out why its so hot to touch the back of it... Wish me luck- your vids are helpful- Doug
thanks doug! when i get my act together im going to make a video showing how to wire up the steering wheel controls
@samswildgarage8805 ya you need to keep adding content. Its good stuff and you explain it well.
@@DougA536 thanks buddy!
problem is i just started a trucking company so im pretty tapped out right now
THANK YOU
Awesome job it looks really clean 💪💪
thanks sorry i didnt respond before. for some reason i was not seeing your comments
Very nice silver bezel!
thanks!
What wire do you tap into for the infinity stock amp? Blue/white to what on the stock harness?
its' been a while since i did this you'll need to look up the wiring diagram
i cant remember
Can you make another video explaining the amp power tire?
What do you need to know?
How did you burn the piece out?
soldering iron
For your ac climate control panel how did you install the blue lights? Are they bulbs that you twist in like the dash or do you have to sauder them in?
i had to solder them in
I wired mine up the same as this and have no sound to any speaker. Even marked what black and yellow to use. Same truck 04 with infinity sound. Any ideas what I did wrong?
need to make sure that you wire the signal wire to turn on the factory amp
@@samswildgarage8805 watched a few times, was looking if you pointed out the amp wire,
@@RASNOHIO do you have the adaptor harness?
the blue wire on the adaptor is the amp power signal
Do the solid blue wire connect to the blue and white wire for the amp?
How do you screw the radio to the front face without going through it
There are protruding plastic tabs
On the new bezel with holes pre drilled in them
looking to get a ram of the 05-08 variety, i cant find ones with a black interior. Is yours black i cant tell, and is it a factory option?
Technically it’s called charcoal
But it shows as black yes mine is 04
I see you have dual climate control how do you replace the lights in the back? I have bulbs that are out and the I can’t find a replacement. I figured I would replace the bulbs then.
You have to solder them in
It’s a lot of work but worth it
You have to remove the bulbs from the plastic holders that they come in so it’s just a bulb with two wires coming off it
So you do have the infinity system did you have to mess with amplifier?
ya i have the infinity
it works with the stock amp
@@samswildgarage8805 nice im ordering it hopefully will go smoothly thanks
@@samswildgarage8805 I just had a local guy install a double din pioneer and 4 door speaker's in my dodge ram 1500. It has infinity audio and he's telling me the only way my radio will work is if I have a pac roem-chr...my audio doesn't work and he said he need the pac roem-chr to by pass it...is this true and how do I rectify the problem if not?
Seen this and the bezel is not found have any where else I can look
i just found it on ebay poking around
@@samswildgarage8805 could you link the new one you found?
i can only find it on amazon in black
@@loftt8506 www.amazon.com/Metra-95-6522B-Double-Install-2002-2005/dp/B00KQ1JJA0
did you have to do a amp bypass? sorry if I missed it in the video
no. i used the stock amp
just plugged into factory radio plug
Will the stock amp work with a ram with an infinity speakers?
Parking wire goes to ground?
yes that way you can adjust settings while driving
The link is not working for the dash panel!?
There is another one In the comments
I want to order the harness but it says error on the page. Do you think you could send another one link?
And will this harness work on any deck?
It should
www.ebay.ca/itm/363260191806?fits=Make%3ADodge&hash=item5493fea43e:g:yO4AAOSwYBpeML1n
Ahhhh perfect now it does! Thank you!
How come you have 4 heated seat buttons?? I've never seen that before in one of these trucks
I added the other two in I plan to add heated rear seats. I just need to find some wrecked front seats because i need the wiring harness
What did you use to cut the dash?
what part are you talking about?
I am looking for someone to show me not tel me
I’m sorry. I had already installed it before I started this channel
The ebay link.dosent show up what year chevy did you use
this is a dodge
Did you put chrome rings around the gauges?
yes do you like it?
@@samswildgarage8805 yes looks really good. How did you do it?
@@tom.p1986 do you want me to make a video or do you just want a link to the rings i bought!
www.ebay.com/itm/For-Dodge-RAM-1500-2500-3500-Aluminium-Gauge-Dial-Rings-Chrome-Trim-Surrounds-/293513565880
@@samswildgarage8805 I bought a blue faceplate for mine but I couldn't get the gauge cluster out
Does the touch screen have Android auto?
it has apple carplay
Bezel page is not working anymore I fear
Here is a new link
www.amazon.com/Stereo-Double-Navigation-Metallic-Installation/dp/B009M7G6AA
how is the deck attached to the bezel?
there are two plastic L-brackets included in the kit
Thank you. I just purchased the kit you listed
@@firsthope8196 awesome!! it's not my kit
it's just the one that i used
What size screen is the radio?
6.2in i think
link to the one i used is in the description
Does this radio work with the steering wheel controls?
yes but you need an adaptor
so any radio that has a remote plug on the back of it can be made to work with the steering wheel controls i just have not done it yet because i plan on installing a 4th gen steering wheel so i'll get the adaptor for that. subscribe to my channel i'll be doing a video on the steering wheel install and radio interface in the next month
So yeah pointless
What did you use to cut the metal?
I didn’t cut any metal