Citroen Relay SWB - Camper van Conversion - Fitting The Double Bed
Вставка
- Опубліковано 28 бер 2024
- Fitting The Double Bed.... - In this Episode i fit the full size double bed using the so called IKEA hack "SKORVA" bed beams along with the Skorva bed brackets also from IKEA.
Pretty much a easy install, probably the easiest bit of the van build so far, attaching them using M-6 M-6 & M - 10 Bolts. running the grinder over any rough bit of metal before coating them with Hammerite to protect any exposed metal.
Here are all the parts which i used in to fit the bed
IKEA Parts:
Skorva Bed Beam (Part No. 901.245.34) - www.ikea.com/gb/en/p/skorva-m...
Skorva Brackets (Part No. 116791) - www.ikea.com/gb/en/customer-s...
Luroy Bed Slats (Part No. 502.787.26) - www.ikea.com/gb/en/p/luroey-s...
Everything you see here was filmed on 2 broken Mobile Phones and a cheap microphone.
New videos every week and as always if you like the content of these videos please Subscribe, Like or Comment it helps a lot with the algorithm, Thank You!
Loving this. Well done on the double bed install. I dont suppose you have IKEA links to your SKORVA brackets etc ? I did a quick search but to no avail.
Thank you, i have just included the links in the description of all the bed parts, i would strongly advise ordering them 2 weeks in advance prior to bed build as they come from Sweden...hope this helps mt friend..
Good job Dan, can you remember what length bolts you used to attach the beams?
Buddy they are 5 cm long with out the head, i did get a couple half the length to save time screwing them in and out in and out , so the we half length ones i used just to save time..
Cheers Dan
@@scattyfox no bother!