Kawasaki Ninja 300 Oil Change
Вставка
- Опубліковано 30 сер 2015
- Kawasaki Ninja 300 Oil Change
How to Change Oil And Filter Kawasaki Ninja 300
oil change on ninja 300 how to change oil filter.
kawasaki ninja 300 oil change and replacing oil filter.
What I used to change the oil in ninja 300:
3L of castrol GTX SAE 10w40 oil.
oil filter K&N KN303 for ninja 300.
oil filter removal tool for old filter currently on the ninja 300.
socket of 17mm to remove oil pan bolt and to tighten oil filter.
Aluminum foil to cover exhaust preventing any oil spilling.
PwnsJones Pwns Jones - Авто та транспорт
Still coming back every time I go to do this for a recap. Thanks for generously sharing...and for the laughs.
Thanks this will help a lot when I do my first oil change!! I just bought my first bike. 2013 blacked out ninja 300 !! I love it!
nice. I just bought my 1st bike 2015 ninja 300... it's nice need little work. cost me 800 bucks needed cluth and fairing. what I was told. it needs a lot more work. its rideable but not road ready .
The bike takes 2.2L with the filter on and the bike standing uprite with the engine off. (Reference the service manual)
Yes!
So should the sight glass be half full with the bike off and standing upright or should it be half full with the bike on and upright?
@@Jrod_4KIt should be up to the top line with the engine off and the bike upright. Remember, it's always better to under fill a little than to over fill a little.
Thank you, so much for making this video, it's simple, clear and it really helped me out, with my KN300, when I didn't have a manual. Deh;)
Take the oil cap off, leave the bolt out, and remove the oil filter. It allows the oil to flow without suction or pressure
This was an AWESOME video. And the dad jokes- total bonus
I would imagine this will be the same on the Versys 300X. Thanks for your vid.
Very useful, thanks pwnsjones
Nice job ! Thx for the video
thank you so much for posting this.
Welcome to the 300 club! I remember when I took the stock oil filter off it took me forever lol if you have ideas for mods I've done plenty to my bike haha safe riding!
+The Muscle Biker Ya, what mods you got?
I've got a couple videos you can check out on my channel but to start a mussari exhaust, quickshifter, glowing lights phone mount, and a bunch more
My guess is you have added to much oil. The oil should be just below the top of the sight glass when the bike is not running and sitting straight up, not leaning.
Halfway up the sight glass is my rule of thumb. Start it up and let it run for until warm. Check. Add. Done.
when oil-filter is not remove/change, refill 2-liters only
change oil-filter fill only 2.2-liters
engine overhaul/completely dry fill only 2.4-liters
above 2.4-liters is not good.
(just saying :-) )
My guess is you don’t know when to use to or too.
Yeah too much oil. The oil will rise higher when engine gets warmer.
easy tutorial, thank you!
Great video will do it myself now.
New rider here . Thanks for the help
best video eva ...make my day ...cool thanks
Thank you... Im gonna try it myself!
thanks for the video really useful
I Loveeeee your tutorials :D
I luv you 💋😘
ninja300cc engine looks exactly the same as mine Kawasaki z300. 😊 cool video bro
daro ChaNNeL most of the parts between the Z300 and Ninja 300 are identical... plastics on the front end are obviously different as are the front brake lines and headlight.. but the headlight is lifted straight from the Z800 so no worries there 😁
You Rock Aaron! ;-)
*HEY GUYS, I NEED SOME HELP!*
I changed my oil and oil filter yesterday on my 2011 kawasaki ninja 250 and when I went to tight the filter cover and oil filter mounting bolt, I broke the filter cover.. It's in pieces and I've been searching all over to get a replacement but where's a good place to order one? Or could I use another oil filter cover at maybe a local hardware or bike shop??
I wish my CBR250R baked potatoes so easily. It isn't hard, but that thing has nice access.
Just subbed
Always check your fluids when they're cold. Engine off and after they've settled.
PWNS JONES can you make a video of a full coolant flush and replacement on a ninja 300. I have a ninja 300 just like the one you got and I don't know how to do a full coolant flush.
cheers mate
hello can you please do a video on brake fluid change!!
Do you know how to change the running lights ? I can't find any videos on UA-cam about how to do it, imo my findig videos about the headlights but not the running lights
Plz mAke video on interchangeable parts or similar parts in ninja 250r and ninja 300
You had me at baked potato .. LOL .. thank you for the video .. a little entertainment is always good
Thank for the video. just did my first oil change on my sons Ninja 300. foil over the exhaust was a good idea. I used close to 4l oil (MOTUL 5100 SEMI-SYNTHETIC ENGINE OIL 10W40)
Sorry guys .. Update on the oil .. i have 1L left in the container .. i though it was a 5L but its a 4L .... so yes i used close to 3L oil in the bike
Ninja 300 takes only 2.2L of oil , not 4L. you over filled the engine.
What he said!👆
Poor bike! Refer to checking proper forums online if you do not have a manual for the bike! 4L of oil is drowning the bike! Will do more harm than good…
Wait wait the service manual says 2,2L without oil filter and 2,4L with oil filter change. You overfill it
@@julianmustofa4423
2.2L changing oil filter
2.0L without out filter.
Hope your GTX was MOTORCYCLE oil (for your wet clutch performance). Rotella T6 for EVERYTHING. (Try it - you'll never go back).
Damn how did you modify the filter wrench lol I don't want to remove the fender
Way too much oil! Half full in sight glass with engine OFF and upright. Not running and leaning. This is how you burst seals. Also, take the faring off one side of the bike. Its 4 screws and two clips. Makes things 10x easier.
you should never tighten the filter with a wrench or socket. not only is it too tight which could damage the threads it also can damage the filter and cause a leak.
Is that same way for ninja 125 2020. And what the best oil for it . Please let me know.
levels should be checked warm, engine off bike level...
Did you not take off any fairing before hand?
Can ninja 300 rear disc plate fit 2010 ninja 250r....Plz answer...
Tap on the wrench to break the bolt free, instead of pushing it and breaking your knuckles. I was all scarred up before I figured that one out. So just some friendly advice.
Also, adding an extension to clear hitting anything with your hand when you have to lever something off will save you from getting hurt.
I like the aluminum foil idea. Could have uses in other areas as well.
Tapping on the wrench isn't the best idea, you can lose stability on the head and round / churn the edges of the head. Instead just push with a flat hand instead of wrapping your hand around the wrench. You'll just slap things instead of wrecking your knuckles :)
I suggested that with the idea that you would hold steady pressure so it doesn't slip with one hand and tap with the other, using both hands in conjunction. I know sometimes this isn't an option but it works in practice. Tapping can generate enough sheering force to break it free, but if it lets go while pulling hard you can hurt yourself. Do what you will, my suggestion is just that, a suggestion.
CH2O just wrecked my knuckles on my pavement 15 minutes ago. Thought about getting a hammer or something to break it lose. Now I pay for it. Haha!
Marton Bagoly Sorry to hear that, Marton. I too have scars from learning the hard way. At least you are doing it yourself and can appreciate what it takes to learn and maintain something you use. A rubber mallet, torch and penetrating lubricant can be your friend. :)
CH2O Removing the fairing for easier access and to achieve better leverage on the bolt works too.
Where did you buy the wrench?
Hey smart one...you’re suppose to put at least some oil in the filter because you’re not suppose to do a dry start! Good luck w the rings and the walls on that bike down the road lol. And always just hand tighten the filter 🤦🏻♀️
I use Kawasaki performance brand SAE 20w-50
Bro the potato 🥔 comment 😂 🤣 💀
Ooooh THAT was the front tire?
Is that gtx wet clutch compatible ?
Kelly Hipp if it says energy conserving on the API starburst, then no.
Please a question, my manual said change oil every 12.000km, my dealer 6000km i am getting ripped off?
Enrique DB 6000km is normal for an oil change. 6000km or 1 year, which ever you reach first
Hey pwns what mileage did you change your oil at?
+Nicholas B 0kms. I changed it right when I bought it.
How many miles between oil changes?
Baked Potato!
lml
Tin foil, great idea, I'm going to use it next time I change the oil in my riding lawn mower too.
can you top off your coolant with blue if your existing one is color green?
Yes and the final colour will be yellow😂😂
3 liters gor that engine!!?? Geez, my bike is a 200cc and it uses 1.3 liters lol
I use ams-oil syn 10w 40.
This guy reminds me of nicolas cage so much
"Video was uploaded 1 year ago". It was 2015.
It's 2017 now... UA-cam get your shit together.
tightened that filter alittle too much
K&N oil filters blow.. literally.. and you check oil in ever single car and bike on the planet with the engine off!
What year is this 300 and is it the same on every 300? :D
I read 2012 to 1016 is all the same abs or no. it's all the same .. the abs is the brakes everything ends bike is same.
The service manual calls for 2.2 L not 3
112th viewer!
I have a 300 too did ur oil smell like petrol/gas. my 300 oil stinks like gasoline really bad I've been trying to figure out what the problem is.
+Nicholas B Sounds like you have a fuel leak. Check the gas cap as well.
Have the oil tested and see if there’s excessive fuel in there to be sure.
Definitely should put a lil oil in the filter before u put it on
is it mandatory to change oil filter when changing oil??
not mandatory, but you definitely should.
Depends on how many miles you’ve ridden the bike. I change out my filter every 3k. Sometimes I change out my oil at 1.5k. So I’ll change my oil twice before the oil filter is changed.
@@99SVTBolt That's right... a good filter will do its job. There are cheaply manufactured filters. K & M makes great filters. Changing oil at 1.5K on a 296cc high rev. engine is sound advice. I'm doing filter every 3K also. Just my 2 cents worth. Preventive maintenance pays!
Frank Hyde k&n has been having problems with their filters. Oil leaking by the welds on that nut. 🤷🏻♂️
Why stick your finger in dirty, cancer causing oil when you could have poured some fresh oil into the filter to prime it. That way when you start the engine, there already oil in the filter vs the way you did it with a dry filter.
The engine will run a extra couple of seconds running with no oil till that empty filter is filled with oil and then it gets circulated to protect that engine.
I agree in cars we have always added oil to filter b4 installing It. although the filter is side ways on my bike and vertical on my car
I use Ecstar 10w-40 R9000 Full Synthetic
Lmao! Why didn't you just take the right lower fairing off so you could really get at that filter? LMAO! But I got you, that would be more tools. Your title did say the easy way ;)
Genile Bankai Elric it would require a 4mm and 5mm hex key plus a screwdriver.
damn I need some tinfoil
Hmm
I think you used car engine oils?
car oil has additives in it that decrease friction, this bike has a wet clutch, the clutch needs friction. Car oil can and will cause your clutch to slip.
Car oils will cause a wet clutch to slip. If it says energy conserving on the API starburst, then you shouldn’t use that oil.
It's completely different..
Car rpm normally 8k..
Bike rpm can go up to 12k..
So it's absolutely car lubrication oil is not suit for bike...
bro...next time warn about the Foil to Metal screeching
Use to love running my finger nails on the old chalk boards
seriously 3 litres of oil?
Thats not how you measure the oil level. Bike should be upright and not running.
Dude....1/2 to 3/4 turn once rubber gasket has made contact with the block on the oil filter. Also that Castrol Oil U showed is for cars. Use motorcycle oil car oil not design for gears and clutches...
Bro you added way to much oil
hahahaahah faz uma merda ai pronto gasta ate o rim ahahahahah
ha ha ha
Prime the filter with the new oil not the old.
thats so over full with oil
4:01 loathing doesn't mean the same thing as dreading.
PS you're not using your tools well and you added way too much oil, like everyone is saying. I don't think you should be showing others how to do this.
Why would you mislead everyone? This isn't where the oil goes guys! There is a tank on the top of the bike that needs a key to open it. It smells like gas but trust me, put oil in it. You have to flip your bike up side down in order to get the existing oil out. You don't need anything special to flip it. Just flip it and lay it out on the handle bars. YOU ARE WELCOME!
Wftfffff
i hope we all know this is fake asf
the comment is fake*
You an….nevermind…
ask any woman how to change her 300s oil. never meet a man that had a 300
oh how could I forget that for most any rider outside of the state's or Germany a 300 is a big bike.
Curtis Burnham It is a fine bike to own. Not a girly bike at all.
Curtis Burnham You must be fun at parties.
People new to riding might not want to start on a 600 or a 1000, to much power can be dangerous for new riders. Also don't be a dick.....
Marcus Lucio well spoken