I love it. When I had a desk at the office, I had a ledge and I had a series of wooden bowls (4-5) made by my friend Joe. This one would have been a beautiful addition. ❤
Hi Phil, Wayne in Wisc again. Neat cherry end grain bowi. Haven't watched for awhile, but, as always, again learned something new. Keep em coming. for aw
Love this bowl, beautiful. I love my carbide chisels , I can get a pretty smooth finish by just going very slowly and barely touching the wood. Your videos are the best since you tell exactly what chisel and speed to use, not many do that and NO Commercials!
Hi Phil l like your turning. With hollowing end grain if you start with a hole drilled to your depth and then clean out from center to outside with pull cut you’ll find it much easier with either carbide or our conventional tools.
Very nice finish. I like working with Cherry. End grain can be unforgiving I have fond out many times. You would think I would learn after the second, third, or fourth bad catch but ……… enjoyed it Phil. Dan
Cherry wood is "Cherry" especially with the bark on...Bug holes puts the Cherry on top...Thank You Phil & a nice piece of turning...I look forward to your next adventure...tm
Agreed, Jeff, Cherry is Cherry! Wish I had a lot more of it and bigger pieces, but we make do with what we've got! Thank you for watching and commenting!
If it wasn't for the the live edge it would look like a pudding basin not being disrespectful Phil, having the winged live edge lifts the piece out of the ordinary got to love Cherry as well.
End grain turning can be a challenge. This bowl turned out very nice, Phil!👍👍👍👍👍 I have better luck getting a smooth cut with carbide if I crank up the speed to around 1300-1500 rpm. One of the characteristics of using carbide is that the piece must be turned at a fast speed to get a good finish with the cutting edge just tad bit higher past the center….Just a small tad!!! Suggest you experiment with the technique and see what works best for you.
Thank you, Jack! I have shown sharpening in a couple of my videos but maybe I should do one on just sharpening. I use a Oneway Wolverine jig so there's really not a lot to it, very simple. Thank you for the suggestion! Phil
Another fine project Phil! I’ve only ever turned boxes in end grain orientation, but having seen this I’ll be on the lookout for a suitable chunk of wood for a bowl.Thanks for the inspiration.
Turned out really nice Phil. Cherry is one of my favourite woods to turn. The rim with the bark on looks great and I like the “feature” where the branch was, could be a thumb grip or a rest for a (wooden) spoon - hint, hint. It’s good to be back at home, enjoying your videos instead of being laid up in hospital. Regards from the UK & Happy Turning. Geof
So glad you are home and more comfortable, Geof! That's good news! I love cherry too, wish I had lots of it but only some small pieces, now. Take care, follow dr.'s orders and feel better!
It resembles a "Kåsa" a type of cup or mug that the Sami people made from mountain birch. Today they are available in plastic, and almost everyone has one, easy to hang on the belt when hiking. Carsten
I am really thankful for how well you explain what you are doing. I am brand new to wood turning, after inheriting a lathe that has been in my husbands family for three generations. Unfortunately, I have no one to learn from in person so my entire wood turning education has been online. I am loving it and very hopeful my daughter will be the fourth generation to create on this lathe.
Thank you so much, Tammy! I too, learned how to turn by watching UA-cam videos. Well, I had a class in 7th grade but that's been awhile, now. There is such a wealth of knowledgeable people willing to share their experience with us. I'm grateful for what I've learned and if I can pass a little of it on, well, I couldn't ask for more than that! Enjoy your lathe and yes, please include your daughter in the learning experience. She will be forever grateful for the skill. Phil
Gorgeous piece, Phil! I love turning cherry, especially when it`s slightly wet, it smell wonderfully of cherries :) Thanks for showing this wonderful little thing with the long name :D Regards Lars
So glad you like it, Lars! I don't think I've experienced the smell with wet cherry but it sounds like a great experience. Thank you for watching my long-named video! :) Phil
Thank you very much, Stephen! As you know, the more practice the better you will get. I appreciate your comment and the time you take to watch my videos. 😊
Nice job, Phil! I particularly like the finish. Shape is nice too! I’ve not done and end grain bowl yet, but I like the way that turned out! By the way, how do you sharpen a Forstner bit. If you could take a few minutes and show that, I’m sure I’m not the only one who may not know the proper way to do that..... thanks, Charlie Ball
Thank you, Charles! I just sharpen the inside flat of the Forstner bit. I simply use a 400 grit diamond card and just run it back and forth until it's sharp. I haven't found it necessary to sharpen the teeth.
I have been watching a variety of wood turners on YT and I have to say that I like yours probably better than most for the simple fact that you do a terrific job of explaining, in detail, of which most do not tell you anything. Ranging from size gouges, speed, and even what to use on the wood for the finishes. Now I say this because I am just beginning to learn the art of turning and the amount of patience and detail you give is perfect for me. Thank you for your vids and your wonderful work. I also just became a sub so I can keep up with your work as you do different pieces and technics.
Love your work and style-the property adjacent to ours is called ‘Lazy Acres’ Woodcrafts. A one man operation-makes beautiful furniture from our superb timbers. Greetings from down under, Cambridge Tasmania. 👍🇦🇺🔭
There is not a doubt in my mind, David, and when you do I definitely want to see it! Thank you so much for continuing to watch and comment, much appreciated! Phil
You do beautiful work. I don’t get why you use sanding sealer before the varnish. What’s the difference? What would happen if you just used the varnish?
Thank you, Alice! 😀 The sealer I use is Zinsser Seal Coat then I finish with Zinsser shellac. The advantage to this particular sealer is, it's thinner than shellac so penetrates the wood deeper and, it's dewaxed. That means you can put any clear coat over it. Shellac has wax in it and it's thicker than sealer so won't penetrate as deeply. Makes a great finish but not so much a sealer. Also, think of sealer as using primer before paint. It just prepares the wood to accept the paint better and, it works!
It’s not a spoon rest or a thumb hold.....it’s a cover for the head of your tortoise when you fit it over his shell !! 🤣🤣 🐢🐢🐢 Well done Phil ,nice bowl whatever it’s used for.....🦖
Howdy Phil.... Most of my bowls I make from the end grain I think the figure in it is what is spectacular . You're so busy in the morning , I am too @ 9 . I like that little protrusion coming off where branch came out.... , just a suggestion , take a dowel and put some sandpaper on it and sand a little groove , now you can place a wooden spoon on it . Cherry is so nice to work with , and when you put a finish on it is soooooo nice , that live edge is fantastic . I saw some bug holes , any bugs come out say hello ? LOL .... since you used CA , I have bought some and I use it to squirt into some holes help seal inside , figuring if moisture got in may split from the inside out . New England weather unpredictable especially with moisture and humidity . Anyway Phil your bowl looks so nice .
End grain isn't quite as bad as I expected it to be, Bruce. I like that there is no end grain to speak of on the sides of the bowl. I'll probably make more like that. Yeah, could make a spoon rest real easily. I actually thought of that, but thought it might look like an ashtray! LOL! Holes but no bugs in this one, thankfully. Glad the CA worked out for you. Thank you, Bruce, for continuing to watch and comment, very much appreciated!
Ha your right ...it would like a ash tray.....so Phil you would have to turn a spoon right a way and place it on the bowl so it would look so much like a ash tray LOL .....that little protrusion gives it a special character adds so much to it
Great bowl and another well-done video. One suggestion. On end grain, it is easier to cut with the grain, rather than push into it. That means you work opposite to the way you do normally. After you drilled the center, you could have used a pull cut, with your swept back grind bowl gouge. That way the grain is supported, making for easier work and a smoother surface. The same is true on the outside of the bowl: you can work in the opposite direction from your normal bowl, ensuring the grain is supported. Again, great bowl and forgive my making suggestions.
Thank you so much, David! Suggestions are always welcome, I have much to learn and it's suggestions like yours that help me along the path to becoming a better turner. I will try my best to implement your suggestions next time I turn an end grain piece. I do understand what you are saying, but sometimes when I'm standing there, tool in hand, I can't work it out in my mind. Old age, I guess! Thank you for taking your time to watch and comment, much appreciated!
I love your work, and being a very new self teaching turner I appreciate your dialogue explaining the thought processes behind why you choose a certain method. So here is my newbie question, what is the purpose of sanding sealer, and do you have to match the sealer with the end finish you will use? ie; shellac based sanding sealer=shellac only finishes.
Thank you very much, Andrew! Sanding sealer seals the wood to prepare it for final finish. Sometimes it is helpful in sealing and stabilizing punky or loose grain so it can then be turned and sanded cleaner than it can without it. The brand of sanding sealer is use is Zinsser Seal Coat. It is a pre-thinned, de-waxed shellac. This is important. Some folks will just thin shellac thinking they have made a sanding sealer and then wonder why their finish won't stick to it. Shellac naturally contains wax. You can't apply a finish over wax. I've been using the Seal Coat for years and have never had a problem with any finish I have applied over it. I hope that helps! Phil
@@andrewhuske4607 yes! You can use ANY clear finish for a final coat. Here is the product page for Seal Coat: www.rustoleum.com/en/product-catalog/consumer-brands/zinsser/interior-wood-finishes/sealcoat-universal-sanding-sealer
Hi Phil,, Very nice bowl! The little "nub/handle/bark" makes the whole piece! Do you know what the moisture content was before turning? Thanks for the video,,, Tom
Thank you, Tom! I agree about the little handle, but that was designed right in there before I got my hands on it. I just left it alone! :) I did not measure the moisture content on this one. I've had the cherry for more than 30 years so I just figured it was about as dry as it was going to get! Typically, around here, wood never gets much below 10% and I don't have any qualms about turning a piece at 20%. So far, so good! Phil
Being that I've only been turning for about 1-1/2 years I don't have any real dry wood. I did find a piece of 4"x4" about a foot long that I've had since we built this house over 50 years ago!I put it on the lathe and tried to turn a long stem wine "glass" out of it.It ended up looking more like a chalice but it's dry for sure! LOL Most of what I have reads between 25%-35% on my moisture meter.The only type of wood that has cracked after a micro wave treatment is Red Oak!Been pretty lucky with the other types of wood though!
I really like the looks of this one Phil. The bark really accents the cherry perfectly. That little handle on the rim looks as though it was designed right in the bowl. Which I would say it was. Great vision seeing that. I really need to try the shellac finish. How much do you cut the shellac for the final finish? I have much better control with carbides in the end grain so I use what it takes. How much time does it take to edit you videos? They flow so smoothly. I have 3 different ones recorded and it seems I spend more time with edits than I do turning. Hope to get one or 2 posted soon. Keep up the great work! Gary
Thanks, Gary! That little handle was definitely designed right in there before I got my hands on it! I do think it makes the piece. Gary, I buy my shellac pre-mixed. I use Zinsser Seal Coat for my sanding sealer and Zinsser Shellac for the finish. Both are pre-mixed. I started using carbide tools with some bars and cutters purchased from Captain Eddie Castelin. Now that I have purchased a couple tools from Easy Wood Tools, I see a much higher quality. But man, they are expensive! They do work great, though, especially on end grain. It used to take me about the same amount of time to edit as it does to turn the piece, much like you. Now, I'm a little faster but not much. I find I'm only turning about one piece per week when I used to turn about three pieces per week before I started my channel. Looking forward to your next videos, keep'em coming! Phil
I understand, Ron. Not everyone is a fan and then you have the ladies. They seem to LOVE bug holes! Oh, well, to each their own! Thank you so much for taking your time to watch and comment, much appreciated! Phil
@@leonardbrendle7902 I guess you could say it's liquid, Leonard. It changes as you use it and as the temperature changes. A brand new bottle of it can be difficult to get any out of the spout. After you use some and shake it a little, it becomes thinner. On a really hot day, it's almost liquid.
This breaks my heart, Donald. I have replied to every one of your comments in some manner or another. Often with words, sometimes with a smiley. This is not the first time this has happened. I do not know why most people see my comments and some do not. There is nothing I can do about that. And, of course, you won't see this so you won't know I've said it!
I can never believe you are not sure what to do. The professor always knows. You are #1 in turning.
😊
I love it. When I had a desk at the office, I had a ledge and I had a series of wooden bowls (4-5) made by my friend Joe. This one would have been a beautiful addition. ❤
Cool, thanks, Kathleen! 😃
I like it when you do cherry. It always turns out so wonderful. Another masterpiece.
Agree, Cherry is a great wood! Wish I had more of it! 😊
I believe that you have mastered the art of the end grain bowl.🎉
I'm not so sure. I've turned lots since this one and it's a learning curve every time! 😊
I had to hunt forever to find a video that I have not watched. Another great job.
Boy, that's an oldie! It has a cousin too. A matching trivet from the same piece of wood. 😊
@@PhilAndersonShadyAcresWoodshop
I hunt for all your videos, if it has a thumbs up I know I have seen it. I will get to all of them.
Stunning. This has it all - live edge, lovely grain and bug holes!
Glad you like it! 😊
I love the bowl. I really like the live edge. Thank you for talking us through your process. I have learned a lot from you.
I'm so glad, Jean! Thank you very much! 😊
Very nice live edge. Great job.
Love the shape and the great handle you left on. Another real beauty.
Glad you like it, Earl, thank you! 😊
Great video. Love cherry and you made a wonderful bowl from your cherry log. Peace be with you.
Thank you very much, Ray! Stay safe!
I enjoy the dialog as you work. Very nice looking bowl.
Paul.
Glad you enjoyed it 😊
Very nice bowl,fun watching you turn it.
Glad you enjoyed it, thank you!😀
That's AWESOME Phil thanks for sharing!
Happy turning to you Phil 👍
Thanks, you too, Jon! 😊
Wow, that's just beautiful. Nice work
Thanks so much! Glad you like it. 😀
Another beauty. I love the live edge pieces best!!
Cool, me too, thank you! 😊
Hi Phil, Wayne in Wisc again. Neat cherry end grain bowi. Haven't watched for awhile, but, as always, again learned something new. Keep em coming.
for aw
Thanks, Wayne! 😊
Nice, nice, so nice. Great end product. BEAUTIFUL!!!!!!!!
Thank you, Michael! Cheers!
Love it Phil you really know what you are doing great looking bowl
Thanks a lot, Bobby! 😊
Amazing jog on this bowl. You have inspired me to attempt an end grain bowl
Wonderful! I've found it's easier to turn them when you work from the inside out when turning the inside. Good luck with yours Chris! 😊
Love you’re accidents Phil 👍
Thanks, Jeff! 😄
Another beautiful piece. I really like which tools you use & how you use them. As a beginner I have learned a lot from you.❤
I'm so glad, Chris, thank you! 😄
Love this bowl, beautiful. I love my carbide chisels , I can get a pretty smooth finish by just going very slowly and barely touching the wood. Your videos are the best since you tell exactly what chisel and speed to use, not many do that and NO Commercials!
No commercials, I hate commercials and won't subject my viewers to them. 😊
Hi Phil l like your turning. With hollowing end grain if you start with a hole drilled to your depth and then clean out from center to outside with pull cut you’ll find it much easier with either carbide or our conventional tools.
It's really nice shaped like the wings.
Thank you, Don! 😀
I really like that bowl. It is just perfect
I'm so glad, Linda, thank you!
Very nice finish. I like working with Cherry. End grain can be unforgiving I have fond out many times. You would think I would learn after the second, third, or fourth bad catch but ……… enjoyed it Phil. Dan
Thanks, Dan! 😃
Magnificent Shine on the Live Edge End Grain Winged Cherry Artfully Done BOWL
Wow, that's a mouthful, Mitch! 😁
Thank you very much!
Phil
Wow absolutely beautiful amazing grain
I'm really glad you like it, Donald! Thank you for taking your time to watch and comment!
Phil
This bowl is really pretty, the bug holes add character.
Thank you, NanaB, I'm really glad you like it!
Phil
Cherry wood is "Cherry" especially with the bark on...Bug holes puts the Cherry on top...Thank You Phil & a nice piece of turning...I look forward to your next adventure...tm
Agreed, Jeff, Cherry is Cherry! Wish I had a lot more of it and bigger pieces, but we make do with what we've got! Thank you for watching and commenting!
Very nice. Bug holes are great. I once found a live bug/worm in a piece of pecan when it went splat! Thanks for the videos.
Oh! I'm not sure I want the big living ones splattering all over the lathe. Or, my face shield! LOL! Thanks, Edwin!
Phil
Beautiful! 👍
Thank you very much! 😊
That's really beautiful. I love it!
If it wasn't for the the live edge it would look like a pudding basin not being disrespectful Phil, having the winged live edge lifts the piece out of the ordinary got to love Cherry as well.
Yep, Cherry is always a good turn, Lewis! 😊
End grain turning can be a challenge. This bowl turned out very nice, Phil!👍👍👍👍👍
I have better luck getting a smooth cut with carbide if I crank up the speed to around 1300-1500 rpm. One of the characteristics of using carbide is that the piece must be turned at a fast speed to get a good finish with the cutting edge just tad bit higher past the center….Just a small tad!!! Suggest you experiment with the technique and see what works best for you.
I'm pretty much going to stick to high speed steel for the most part. I just prefer it but your advice is sound. Thanks!
You have a great teaching style. Explaining what you’re doing and why. It really helps the less experienced turners out here. Thank you.
Such a nice comment, Sam, thank you!
Phil
Beautiful as always! Thank you for your awesome videos. I'm learning alot
So nice of you, Rob, thank you for watching! 😊
Great job thanks for the insperation and sharing
😊
great piece love it thank you for sharing
Glad you like it, Wayne, thank you for watching!
Very nice!!! Maybe sometime you could show how you sharpen your turning tools,, I would be interested in the flat scraper technique ...Thx. 👍👍👍
Thank you, Jack! I have shown sharpening in a couple of my videos but maybe I should do one on just sharpening. I use a Oneway Wolverine jig so there's really not a lot to it, very simple. Thank you for the suggestion!
Phil
Another fine project Phil! I’ve only ever turned boxes in end grain orientation, but having seen this I’ll be on the lookout for a suitable chunk of wood for a bowl.Thanks for the inspiration.
Thank you so much, Tim! When you find that chunk of end grain I'd love to know how you get on with it in the making of your bowl.
Phil
Another masterpiece!
Thanks, Tina! 😊
Turned out really nice Phil. Cherry is one of my favourite woods to turn. The rim with the bark on looks great and I like the “feature” where the branch was, could be a thumb grip or a rest for a (wooden) spoon - hint, hint.
It’s good to be back at home, enjoying your videos instead of being laid up in hospital.
Regards from the UK & Happy Turning.
Geof
So glad you are home and more comfortable, Geof! That's good news! I love cherry too, wish I had lots of it but only some small pieces, now. Take care, follow dr.'s orders and feel better!
That is a beautiful bowl. I love the finish. It really highlights the beauty.
Very glad you like it, William, thank you!
Phil
It resembles a "Kåsa" a type of cup or mug that the Sami people made from mountain birch. Today they are available in plastic, and almost everyone has one, easy to hang on the belt when hiking.
Carsten
Interesting, Carsten! 😀
Beautiful piece. Thanks for sharing.
So glad you like it, Tish, thank you!
Phil
Stunningly gorgeous!
😊
I am really thankful for how well you explain what you are doing. I am brand new to wood turning, after inheriting a lathe that has been in my husbands family for three generations. Unfortunately, I have no one to learn from in person so my entire wood turning education has been online. I am loving it and very hopeful my daughter will be the fourth generation to create on this lathe.
Thank you so much, Tammy! I too, learned how to turn by watching UA-cam videos. Well, I had a class in 7th grade but that's been awhile, now. There is such a wealth of knowledgeable people willing to share their experience with us. I'm grateful for what I've learned and if I can pass a little of it on, well, I couldn't ask for more than that! Enjoy your lathe and yes, please include your daughter in the learning experience. She will be forever grateful for the skill.
Phil
Excellent bowl Phil
Thank you so much, Dallas, I appreciate it!
Phil
Loved the cherry bark edge bowl ,going to turn one Tomorrow
Cherry is fun to turn, Jim. Best wishes for a great outcome on your bowl!
Phil it is an awesome and stunning bowl the wood is amazing.
Thank you, Kobie, for your time watching and commenting, much appreciated!
Phil
Gorgeous piece, Phil!
I love turning cherry, especially when it`s slightly wet, it smell wonderfully of cherries :)
Thanks for showing this wonderful little thing with the long name :D
Regards
Lars
So glad you like it, Lars! I don't think I've experienced the smell with wet cherry but it sounds like a great experience. Thank you for watching my long-named video! :) Phil
You do great work! I hope to be at least half as good as you are some day! It's a stunning piece!
Thank you very much, Stephen! As you know, the more practice the better you will get. I appreciate your comment and the time you take to watch my videos. 😊
Great looking bowl!!
Enjoyed and thumbs up
Thank you so much, Russell, I'm glad you like it!
Lovely bowl Phil, beautiful wood!
The wood and the little handle make this piece, Pamela! Thank you so much for watching and commenting!
Another amazing piece of art! I love it Phil!
Thank you, Nighteagle317!
Phil
very nice work Phil.
Thank you so much, Steve!
Love it too...
So glad! Thank you, Hazel! 😊
Beautiful
Thank you, Bobby! Cheers! 😊
Great job Phil, keep posting
Thank you very much, Larry! I'll keep posting as long as you keep watching! :)
Phil
Really nice Phil, lovely wood 👍👍
Thank you very much, Mark! I love turning cherry!
enjoyed the video....I love the bowl Phil.........
Thank you, Ian, I'm so glad you like it! Thank you for watching and taking your time to comment!
Beautiful! Well done.
Thank you, Jennifer, I'm so glad you like it!
I don't like it-- I love it! Very inspiring. Thank you for sharing your experiments as well as your experience with us.
wow!!! really nice!!
😊
Cherry is so gorgeous...I really like this bowl!
I'm so glad you like this one, Carol! Cherry is one of my favorites!
Nice job, Phil! I particularly like the finish. Shape is nice too! I’ve not done and end grain bowl yet, but I like the way that turned out! By the way, how do you sharpen a Forstner bit. If you could take a few minutes and show that, I’m sure I’m not the only one who may not know the proper way to do that..... thanks, Charlie Ball
Thank you, Charles! I just sharpen the inside flat of the Forstner bit. I simply use a 400 grit diamond card and just run it back and forth until it's sharp. I haven't found it necessary to sharpen the teeth.
Very nice job 👍🏼👍🏼
Thank you, Tomas!
I have been watching a variety of wood turners on YT and I have to say that I like yours probably better than most for the simple fact that you do a terrific job of explaining, in detail, of which most do not tell you anything. Ranging from size gouges, speed, and even what to use on the wood for the finishes. Now I say this because I am just beginning to learn the art of turning and the amount of patience and detail you give is perfect for me. Thank you for your vids and your wonderful work. I also just became a sub so I can keep up with your work as you do different pieces and technics.
Wow! This is a real day brightener for me, G71! Thank you so much for your great comment and for your subscription! I will try to be worthy.
Phil
Phil, I love this bowl especially with the handle.
~Kevin
I'm glad you like it, Kevin! Yup, the handle makes this piece, no doubt. Thank you for taking your time to watch and comment!
Phil
Love your work and style-the property adjacent to ours is called ‘Lazy Acres’ Woodcrafts. A one man operation-makes beautiful furniture from our superb timbers. Greetings from down under, Cambridge Tasmania. 👍🇦🇺🔭
Very cool 😎
Thank you, Thomas! 😊
Nice.
Lovely piece Phil. One day soon I’ll complete a live edge bowl without disaster, just wait and see. All the best. David
There is not a doubt in my mind, David, and when you do I definitely want to see it! Thank you so much for continuing to watch and comment, much appreciated!
Phil
Very nice
Thank you, Roger!
Phil
PHIL, YOU ARE THE MAN, GREAT JOB, GREAT VIDEO, { 6/1/ 21 }...
Thank you kindly, Catfish!
You do beautiful work. I don’t get why you use sanding sealer before the varnish. What’s the difference? What would happen if you just used the varnish?
Thank you, Alice! 😀 The sealer I use is Zinsser Seal Coat then I finish with Zinsser shellac. The advantage to this particular sealer is, it's thinner than shellac so penetrates the wood deeper and, it's dewaxed. That means you can put any clear coat over it. Shellac has wax in it and it's thicker than sealer so won't penetrate as deeply. Makes a great finish but not so much a sealer. Also, think of sealer as using primer before paint. It just prepares the wood to accept the paint better and, it works!
Looks great!
Love it, great job
Thank you so much, Michael!
How deep of a foot do you leave? 1/4” I know you don’t want to peg it in the chuck. Beautiful piece
I'm glad you like it, Kandie, thank you! I guess it varies, I don't have a formula for it but a 1/4" is about right.
Real pretty Phil as you say the bug holes have a certain charm. How I could use a bowl like that. Regards Graham
Thank you, Graham! 😊
Nice cherry bowl and bug holes,, it shows off the wood ,some finishes look like plastic ,. Regards Alf
Thank you very much, Alf, I'm really glad you like it and took your time to watch and comment!
Phil
It’s not a spoon rest or a thumb hold.....it’s a cover for the head of your tortoise when you fit it over his shell !! 🤣🤣 🐢🐢🐢 Well done Phil ,nice bowl whatever it’s used for.....🦖
Now there is an imagination, Arturo! Now every time I look at it I will think of this!! Hahaha!
Howdy Phil....
Most of my bowls I make from the end grain I think the figure in it is what is spectacular .
You're so busy in the morning , I am too @ 9 .
I like that little protrusion coming off where branch came out.... , just a suggestion , take a dowel and put some sandpaper on it and sand a little groove , now you can place a wooden spoon on it .
Cherry is so nice to work with , and when you put a finish on it is soooooo nice , that live edge is fantastic .
I saw some bug holes , any bugs come out say hello ? LOL .... since you used CA , I have bought some and I use it to squirt into some holes help seal inside , figuring if moisture got in may split from the inside out . New England weather unpredictable especially with moisture and humidity .
Anyway Phil your bowl looks so nice .
End grain isn't quite as bad as I expected it to be, Bruce. I like that there is no end grain to speak of on the sides of the bowl. I'll probably make more like that. Yeah, could make a spoon rest real easily. I actually thought of that, but thought it might look like an ashtray! LOL! Holes but no bugs in this one, thankfully. Glad the CA worked out for you. Thank you, Bruce, for continuing to watch and comment, very much appreciated!
Ha your right ...it would like a ash tray.....so Phil you would have to turn a spoon right a way and place it on the bowl so it would look so much like a ash tray LOL .....that little protrusion gives it a special character adds so much to it
Amazing ... love it.
Thank you, again, Chica! You have made my day!
Phil
Great bowl and another well-done video. One suggestion. On end grain, it is easier to cut with the grain, rather than push into it. That means you work opposite to the way you do normally. After you drilled the center, you could have used a pull cut, with your swept back grind bowl gouge. That way the grain is supported, making for easier work and a smoother surface. The same is true on the outside of the bowl: you can work in the opposite direction from your normal bowl, ensuring the grain is supported. Again, great bowl and forgive my making suggestions.
Thank you so much, David! Suggestions are always welcome, I have much to learn and it's suggestions like yours that help me along the path to becoming a better turner. I will try my best to implement your suggestions next time I turn an end grain piece. I do understand what you are saying, but sometimes when I'm standing there, tool in hand, I can't work it out in my mind. Old age, I guess! Thank you for taking your time to watch and comment, much appreciated!
good job
Thank you, Nick, for taking your time to watch and comment, much appreciated!
I love your work, and being a very new self teaching turner I appreciate your dialogue explaining the thought processes behind why you choose a certain method. So here is my newbie question, what is the purpose of sanding sealer, and do you have to match the sealer with the end finish you will use? ie; shellac based sanding sealer=shellac only finishes.
Thank you very much, Andrew! Sanding sealer seals the wood to prepare it for final finish. Sometimes it is helpful in sealing and stabilizing punky or loose grain so it can then be turned and sanded cleaner than it can without it. The brand of sanding sealer is use is Zinsser Seal Coat. It is a pre-thinned, de-waxed shellac. This is important. Some folks will just thin shellac thinking they have made a sanding sealer and then wonder why their finish won't stick to it. Shellac naturally contains wax. You can't apply a finish over wax. I've been using the Seal Coat for years and have never had a problem with any finish I have applied over it. I hope that helps!
Phil
@@PhilAndersonShadyAcresWoodshop Thank you Phil, just for my clarity, can you use non-shellac finishes after using a shellac based sanding sealer?
@@andrewhuske4607 yes! You can use ANY clear finish for a final coat. Here is the product page for Seal Coat:
www.rustoleum.com/en/product-catalog/consumer-brands/zinsser/interior-wood-finishes/sealcoat-universal-sanding-sealer
Beautiful. What do you use for sanding sealer?
Thank you, gsilcoful! I use Zinsser brand sanding sealer. They call it Seal Coat. It's great because you can put anything over it.
Phil
Hi Phil,,
Very nice bowl!
The little "nub/handle/bark" makes the whole piece!
Do you know what the moisture content was before turning?
Thanks for the video,,,
Tom
Thank you, Tom! I agree about the little handle, but that was designed right in there before I got my hands on it. I just left it alone! :)
I did not measure the moisture content on this one. I've had the cherry for more than 30 years so I just figured it was about as dry as it was going to get! Typically, around here, wood never gets much below 10% and I don't have any qualms about turning a piece at 20%. So far, so good!
Phil
Being that I've only been turning for about 1-1/2 years I don't have any real dry wood.
I did find a piece of 4"x4" about a foot long that I've had since we built this house over 50 years ago!I put it on the lathe and tried to turn a long stem wine "glass" out of it.It ended up looking more like a chalice but it's dry for sure! LOL
Most of what I have reads between 25%-35% on my moisture meter.The only type of wood that has cracked after a micro wave treatment is Red Oak!Been pretty lucky with the other types of wood though!
I really like the looks of this one Phil. The bark really accents the cherry perfectly. That little handle on the rim looks as though it was designed right in the bowl. Which I would say it was. Great vision seeing that.
I really need to try the shellac finish. How much do you cut the shellac for the final finish?
I have much better control with carbides in the end grain so I use what it takes.
How much time does it take to edit you videos? They flow so smoothly. I have 3 different ones recorded and it seems I spend more time with edits than I do turning. Hope to get one or 2 posted soon.
Keep up the great work!
Gary
Thanks, Gary! That little handle was definitely designed right in there before I got my hands on it! I do think it makes the piece.
Gary, I buy my shellac pre-mixed. I use Zinsser Seal Coat for my sanding sealer and Zinsser Shellac for the finish. Both are pre-mixed.
I started using carbide tools with some bars and cutters purchased from Captain Eddie Castelin. Now that I have purchased a couple tools from Easy Wood Tools, I see a much higher quality. But man, they are expensive! They do work great, though, especially on end grain.
It used to take me about the same amount of time to edit as it does to turn the piece, much like you. Now, I'm a little faster but not much. I find I'm only turning about one piece per week when I used to turn about three pieces per week before I started my channel.
Looking forward to your next videos, keep'em coming!
Phil
Ficou lindo
Obrigado!
Was this piece of cherry dry ?
Very dry, Cecil.
Sorry Phil I just don't like bug holes if not for them it would be a nice cherry bowl.
I understand, Ron. Not everyone is a fan and then you have the ladies. They seem to LOVE bug holes! Oh, well, to each their own! Thank you so much for taking your time to watch and comment, much appreciated!
Phil
what wax do you take that shines so well?Lg. Adi
Howdy, Adolf! As I stated in the video, this is finished with sanding sealer and shellac. No wax was applied.
Phil
Schellackpolitur ADI@@PhilAndersonShadyAcresWoodshop
Quero uma de presente 😀😀
Eu gostaria que isso fosse possível!
❤ 👍👍👍
Oh, I forgot about these. The trivet is a cut-off from this bowl. 😊
Beaut
Thank you, Cynthia!
Phil
You do such TERRIFIC work!!
Thank you, Colleen! 😊
I always get cracks in my end grain bowls.
It sure happens, Leonard.
Is feed and wax come in a liquid form?
@@leonardbrendle7902 I guess you could say it's liquid, Leonard. It changes as you use it and as the temperature changes. A brand new bottle of it can be difficult to get any out of the spout. After you use some and shake it a little, it becomes thinner. On a really hot day, it's almost liquid.
@@PhilAndersonShadyAcresWoodshop your sand &sealer,is food grade?
@@leonardbrendle7902 No and neither is the feed and wax.
i hate to tell you but you nrver respond to my comments,why is that
This breaks my heart, Donald. I have replied to every one of your comments in some manner or another. Often with words, sometimes with a smiley. This is not the first time this has happened. I do not know why most people see my comments and some do not. There is nothing I can do about that. And, of course, you won't see this so you won't know I've said it!
Very nice
😊