How Francis Turbines Work (Hydropower)
Вставка
- Опубліковано 22 сер 2024
- Want to continue learning about engineering with videos like this one? Then visit:
courses.savree...
Want to teach/instruct with the 3D models shown in this video? Then visit:
savree.com/en
******************************************************************
Learn how Francis reaction turbines work! We look at all of the Francis turbine’s main components and use 3D animation to show how it works!
Like this video? Then check out our other videos!
🚢 Marine Diesel Two Stroke Engine - How it Works! - • Marine Diesel Two Stro...
🚢 Ship Parts and Terminology Explained! - • Ship Parts and Termino...
⚙️How Deaerators Work! - • How Deaerators Work (E...
⚙️How Shell and Tube Heat Exchangers Work! - • How Shell and Tube Hea...
⚙️How Power Grids Work! - • The Electrical Grid an...
⚙️How Watertube Boilers Work! - • The Electrical Grid an...
⚙️How Dams Work (Hydro Dams)! - • How Dams Work (Hydro D...
💡Control Valve Types (Gate Valve, Globe Valve etc.)! - • How Shell and Tube Hea...
💡Transformer Parts and Functions! - • Transformer Parts and ...
💡Plate Heat Exchangers Explained! - • Video
📚Want to learn more about engineering?
Then join saVRee to access over 45 hours of engineering video courses! New courses every month!
courses.savree...
Hope to see you on a course soon! 👋
🏫Want to use the 3D model in this video to present, instruct, or teach? Simply join saVRee! We have over 400 engineering models that will make your life a lot easier!
savree.com/
📱Check out our socials!
linktr.ee/savree
📖You can learn more about engineering in our technical encyclopedia: savree.com/en/...
▶️Francis turbines are mixed flow reaction turbines. They are used in many hydroelectric plants because they can be used over a wide range of pressures and flow rates.
Pumped storage power stations use Francis turbines because the runner can act as both a hydraulic pump and hydraulic turbine.
How it Works
Water flows into the scroll case from the penstock. Water then flows through the wicket gate to the turbine runner. The water enters the runner radially and is discharged axially, because of this, Francis turbines are classified as mixed flow turbines.
After discharge from the runner, the water enters the draft tube then the tail race.
#saVRee #PowerEngineering #IndustrialEngineering
Want to continue learning about engineering with videos like this one? Then visit:
courses.savree.com/
Want to teach/instruct with the 3D models shown in this video? Then visit:
savree.com/en
The graph at time mark 4:46 comparing Pelton to Francis to screw propellers was most informative. That was something not seen elsewhere and very helpful.
U were the best teacher than a book and professor because non of them can explain in such detail with 3d concept..thank u a lot
The guide vanes should be turned toward the francis turbine, how they are place in your graph, it causes that water crash againt them instead of going directly through the turbine following the curve of the vanes. This placement of guide vanes could potentialy cause damage to the turbine due to cavitation created by the lack of pressure.
Thank you, this really helped me with my science studies!
Thank you for making it easy for us to understand. Please also include a video explanation on velocity triangles of Francis, Kaplan and Pelton turbine to calculate various parameters like hydraulic efficiency etc
Is there a small size that produces 5 megabytes ... or one megabyte? How much does a cubic meter of water need per second ... and how much is it worth in dollars ...
Thanks for the excellent illustration 🙏
Spectacular Videos! Love the 3D demos. By any chance can you post any videos of Super Turbo Turbines or perhaps even Steam/Gas Turbines. Thanks! And again, Great videos.
Excellent explanations and demonstrations, thanks very much!
You're very welcome!
Very surprising that the narrator is describing the water direction incorrectly, initially. Does he not analyze a video before posting it?
Unless I entirely misunderstand this thing.
I still give it a 👍
Thank you!
PERFECT!!
best video .. desribes it beautifully
Very nice sir
Thank you so much. It was really helpful:)
Glad it helped!
Please make a video on the actual permanent magnets that are used in this application.
Very useful
why the direction of the extern wings direction is opposit respect the rotor wings?
thank you sir provide us to learn about of francis turbine how does it works.
Hello! Can someone please explain how to arrange and operate a Francis turbine to work as a pump?
Runner is the only rotating part of the turbine. How is it connected to the non rotating parts? I mean it can't be hanging in the air.
Probably with a bearing. "Francis turbine parts" at "en.wikipedia.org/wiki/Francis_turbine"
Do you have any info on the Draft Tube?
Is there a video how it pumps the water up and are there smaller francis turbines and how small
Please upload videos on braking system sir
excellent
Hello, I am doing a thesis on hydroelectric power plant design, but I could not find a clear enough source. If there is a source that explains the principles of hydroelectric power plant design step by step, could you suggest you know?
Hello. Great video! I am trying to build a hydraulic system in Africa where we use 220V system instead of 110V. I want to use the hydraulic system from a well or in tank to produce electricity. Which turbine do you recommend I use? I want to be able to power a fridge, A.C, washer, microwave all the heavy loads. Do you have a generator or runner in mind? Would I need a battery or an inverter? If so, what kind?do you inn is a co oany that sells hydraulic system altogether (turbine, generator, battery, inverter etc) instead separately? Sorry for all the questions. Thank you for your help
The first you need is a difference of height from were you take the water and the place you will pour it.. as more difference in height better.. do you have that possibilitie?
You should do one on Tesla Turbines
can you please explain which part is the diameter and width of impeller in this figure .width of impeller is hard to understand
Can anyone point out a source for smaller Francis turbines…in the less than 50 gpm range….thanks
Why is it a reaction turbine? Since the movement is caused directly by the water hitting the blades...
Is there a small size that produces 5 megabytes ... or one megabyte? How much does a cubic meter of water need per second ... and how much is it worth in dollars ...
Do you have a link showing more information on the wicket gate system.
At the moment, no. But good idea for the future.
How much is this in dollars? The design ... can address the company and know its specifications .. yet it generates electricity and does it have sizes. ... thank you very much ....
Why does the turbine spin in the opposite direction to the water flow in the scroll case? Intuitively it would seem more efficient to have it spin with the flow so that's got me scratching my head a bit.
Oh, it's a mistake in the video's 3D model.
Why did they install filthy, used hydraulic cylinders?
Was all we had in spares. New ones arrive next week!
Sir this is mixed flow turbine.
But how water leaves in francis turbine with radial discharge at outlet?
Please ans
@@savree-3d
U dint got my que
This is modern Francis turbine with mixed flow
But earlier there was Francis turbine with radial outward discharge
How it occurs?
*My english is not good
Tommmmyyy shelbbbbyyy, your accent is like him
I want to see the magnets!!
Poli sadanam
That drawing is poorly done, the ball has a direction of flow and the impeller has a direction of rotation in reverse.
Why is it said that a pure radiation turbine can't produce work.??
Sorry,I mean pure reaction turbine..
Why are there no multi stage turbines ??
Answer the tech is available from RDP MARINE AUSTRALIA
The techs will say the issues are turbine surging OR to much backpressure OR the dissolved gasses issue ALL are nonstarters
So were is the price drop you can have by fitting this item ?? YES YOUKNOW WHY
ese dibujo esta mal hecho , la boluta tiene un sentido de flujo y el rodete tiene sentido de giro al revés
Waseem sir users 😂😂
Vedio is only 50 percent understood fracis turbine for hydro electric