P0033 bypass valve solenoid

Поділитися
Вставка
  • Опубліковано 5 вер 2024

КОМЕНТАРІ • 37

  • @mikethepitbull3170
    @mikethepitbull3170 4 місяці тому +2

    I came to comment and say THANK YOU!!! Sure enough, the same wire harness was unplugged, and it was just in the shop for recent service! I was also throwing a P0300 and P0420, but those codes are also permanently gone! Thank you, sir - I appreciate the short and helpful video!

  • @user-jf7dz1go4u
    @user-jf7dz1go4u 6 місяців тому +1

    Many thanks to you, I suffered with this error for a very long time, the connector was simply disconnected. you saved a lot of money for people

    • @professorlugnut
      @professorlugnut  5 місяців тому

      Did you make sure the metal piece was there to hold it in place?

  • @gycuk1173
    @gycuk1173 Рік тому +1

    Can i just thankyou so much Vaxhall Zafira returned from engine rebuild (1.4) Engine managment light on wouldnt clear ran at hight speed like rubbish (P0033 code). Thanks to this video was able to find Bypass Valve and find they had NOT plugged it back in. Saved £££££ now light off and car running great. Many thanks my freind

    • @zacharygardner1389
      @zacharygardner1389 Рік тому

      Was it the 1.4 multiair? I’m having trouble finding where it is

    • @gycuk1173
      @gycuk1173 Рік тому

      @@zacharygardner1389 rear left of the engine as you look at it a little down

    • @professorlugnut
      @professorlugnut  Рік тому

      multiair motor is fiat or chrysler.

  • @phlodel
    @phlodel 10 місяців тому +2

    Bless you, my friend. My 2017 Buick Encore had this unplugged and I couldn't find where that terminal goes. People suggested it was for a feature my car doesn't have. I got the P0033 code and figured it had to be that unplugged terminal. Just in case someone smarter than me had the answer, I searched you Tube and found your video. I probably would have eventually found it, but you saved me time and aggravation.

    • @professorlugnut
      @professorlugnut  10 місяців тому +1

      You are welcome

    • @phlodel
      @phlodel 10 місяців тому

      @@professorlugnutI replaced the check valve in the intake manifold and the PCV valve -valve cover. We know who left that terminal loose. Fixed a P0299 low boost code, No more check engine light, which GM refers to as the Malfunction Indicator Light or MIL. It will forever be the Mother In Law to me.

  • @MADeULOok0
    @MADeULOok0 Рік тому +1

    Thank you for making this video it has helped me tremendously 👍👍👍

  • @123mustangone
    @123mustangone 6 місяців тому

    Thank you, mine was disconnected. I plugged it in, but so far the code hasn’t gone away. I’ll try again tomorrow, maybe the plug didn’t seat well. I hope so at least.
    I pulled the engine to replace the clutch and fix oil leaks and forgot to plug this connector in.

    • @professorlugnut
      @professorlugnut  6 місяців тому

      It may take a few key cycles to clear. Unless you clear it with a scanner.

  • @MassiveTrackHunter
    @MassiveTrackHunter 5 місяців тому

    What a terrible place to put a solenoid. Nice hot spot, and hard to get to.....very GM of them to do that. Thanks for helping us locate it.

  • @libertyss32
    @libertyss32 Рік тому

    FIXED!!!!!!!! You are the man BROTHER!!!!!!!!!!!!!!! Thank you sir!!!!!!!!!

    • @jba128
      @jba128 9 місяців тому

      what did u do ?

    • @cesargutierrez2708
      @cesargutierrez2708 8 місяців тому +1

      ​@@jba128 do you have video how to replace it ?

    • @jba128
      @jba128 7 місяців тому

      i went to the junkyard and found the clip@@cesargutierrez2708

  • @a1load741
    @a1load741 Рік тому +1

    Thank you u the man

  • @petev.9357
    @petev.9357 Рік тому

    Your connector fell off and will again because the metal clip is missing. People think to remove the connector you remove the clip, you just squeeze the clip and it comes off.

  • @boogepwnaneishvili7367
    @boogepwnaneishvili7367 Рік тому +2

    hi,if these solenoids dont working,can endgine shut down by itself?

  • @MagikBall
    @MagikBall 7 місяців тому +1

    What hold the solenoid on

    • @SonicOrbStudios
      @SonicOrbStudios 5 місяців тому

      It's triple clipped to the intake manifold, it's almost impossible to swap without removing the manifold

  • @cesargutierrez2708
    @cesargutierrez2708 9 місяців тому +1

    how to replace it make video please

    • @professorlugnut
      @professorlugnut  5 місяців тому

      I don't have one of these in the shop at the moment. When I get one in I will do a video.

  • @GM-gh6tt
    @GM-gh6tt Рік тому

    Question. I have a sonic rs. Very much regretting getting the car now but. We been having an issue when idling at a light it idles rough. Rough start or when accelerating faster it kinda surges. We've replaced sigh... The turbo fuel injectors plugs pvc giant black part new air filter new mafs new throttle body then spent 945 at chvey (all the parts listed I did) It's still doing issues named🤬😭 The things we thought it maybe we didn't replace is the cat and fuel pump/filter. But, i saw this part and not sure if it can cause the issues? If you baby it drive it like a grandma it doesn't do it so much or if your in cruise. But I'm about ready to burn it to the ground at the moment 😒

    • @professorlugnut
      @professorlugnut  Рік тому +1

      I don't think so. Is it throwing any codes?

    • @GM-gh6tt
      @GM-gh6tt Рік тому

      @@professorlugnut Nope not a single one...

  • @JuanCruz-fb3ev
    @JuanCruz-fb3ev Рік тому

    Is there video that shows how to replace it thanks

    • @professorlugnut
      @professorlugnut  5 місяців тому

      Not yet but when I get one in the shop I will do a video.

  • @j.megatron
    @j.megatron 5 місяців тому

    Blood I just bought the charge air bypass for my Cruze Eco because it read Turbo Bypass Valve stuck. So what I was sent appears to be the the waste gate valve...help anyone

    • @professorlugnut
      @professorlugnut  4 місяці тому +1

      Charge air bypass is under the manifold should be the same solenoid

    • @j.megatron
      @j.megatron 4 місяці тому

      @@professorlugnut honestly, at 204K I am considering... putting a V6 in there. A Impala V6, because GM has a crate engine for $3,000 inline 4 w/ 255hp, and I will be dead at that point

  • @leecase4408
    @leecase4408 5 місяців тому

    Anyone have the part number? I can't find....

  • @CoffmanBG
    @CoffmanBG 3 місяці тому

    Part number anyone?