THANK YOU SO MUCH!!! I have spent weeks trying to recover a surface laptop 3 that was stuck restarting over and over after doing a factory reset... I had read so much and watched so many videos but nothing, almost lost all hope and after following your steps it finally worked!! Thank you thank you thank you!!!!!
Worked perfect thanks so much! Very straight forward. Do not try to use a USB or external hard drive that has stuff on it. Clean USB works perfect. I used 16GB.
Just curious? I've seen about a dozen troubleshooting tips and tricks and a bunch of questions regarding the data. I work for a company where we have a stock of Surface for our users. No pressure to replace a unit if need be. I want to know about "data recovery"? Is there a way to save the data? That's my question? Folks are giving you lots of "High Five" but will this get me to a place to retrieve or restore data
With windows computer I hear a lot about getting loss data not a lot of people know how to get it done and I don’t know how however there are ways to get loss data back I hope I answered your questions
I need to do this for my surface pro x but no other pc or laptop would this work if I used an android device or iPhone do download windows to and transfer to usb from there
after cleaning disk part through cmd prompt..i ended up strucking in bios menu which is asking for password.. nothing works . what should i do know ? any idea
I had to disable Secure Boot, manually boot from the recovery USB (you can swipe left on the UEFI devices to force a boot from a specific device), then I had to reenable secure boot and use the Power + Volume Down trick to finally get it to boot at recovery.
This might be a dumb question but my usb can with things already downloaded too it so do I need to delete those things and have my usb completely bare for the image recovery to work? It was like a vault thing
My surface pro keeps loading to a surface uefi loop. I downloaded the surface recovery image, extracted on to a usb drive. At the surface UEFI screen, I configured secure boot to none and boot configuration to usb and exit. This brings me to a choose language startup, went to troubleshoot and recover from a drive option, tried just remove my files and fully clean the drive, but both ended abruptly at early stage saying problem resetting your pc. Desperate here, any advice/suggestions??
I did this and it worked but when I turn off my SB2 and turn it back on again it goes back to the UEFI screen... The only way it boots up is if I hold down the volume down button. Any way to fix this?? I tried to change the boot order and it does the same thing..
i plugged the flashdrive and then got a red lock on to then it asked me for the 48 digits Bitlocker recovery key with no way to find it, i just bought this surface gen 5 model 1796 and this is the first thing i deal with, please help if you know something
My surface pro4 did not continue after choosing recovery options. It's giving me " There is a problem with recovery" notification. Any suggestion about what to do?
I was stuck on bitlocker and by trying to bypass it I watched another video on UA-cam which made me use command prompt to clean my hard disk, now I’m stuck in UEFI hope this method will help me ??? Using a surface pro (5th gen 2017 )
Hey so I did the whole process but once I clicked on “fully clean the drive” the screen goes black with the windows logo and shows the percentage and it has been on 1% for like 15 mins...what do I do?
I found a better fix to this last night and know the cause of it. The firmware wants to update however for some reason secureboot needs to be disabled. (disable secure boot and after the update has completed enable secure boot) "surface pro 7"
Help. I’m on surface pro 5 downloaded the usb thing but I did all the steps, it doesn’t have the circle that it’s loading my usb.... what do I do now? Just stuck with a white windows logo it didn’t read my usb
Hi, thanks for the video.. its help a lot.. but i still have a problem.. everytime i shutdown and open again without the pendrive it still go to UEFI loop again.. how to fix this?
Im on Surface UEFI and been trying to restart and back again to the same loop. Im not even sure whymy laptop is on this. Will all my files be deleted? Does this mean I am on factory reset? But i have not done it. Why.....😢😢😢😢
Hello, I was wondering if you could help me with a problem I'm having, after I insert the USB and click on fully clean the drive, I get an error message saying, "there was a problem recovering your pc" has this happened to anyone?
Bryan Maldonado Possibly but I doubt it walk me through your process is your surface stuck at the uefi screen or your trying to format the entire surface
@@DTDailyTech So I turn on my computer, the surface logo blinks a few times and then goes into the UEFI screen, then I click on exit to restart and it sends me back to the same screen. That's usually the case but there are some rare occasions where I turn on computer and it starts windows normally but after a few minutes of use it shutdowns and goes back into the UEFI loop.
Bro i need help please reply me its a serious problem my uncles gift me microsoft surface laptop and now its showing surface UEFI . i just updated my windows new feature and the pc runs smooth 2 hours after updating now. after that i was watching flim and suddenly a notification came and tells that "your pc ran into a problem " and takes me to surface UEFI then i go to exit and clicked to restart . its being restart but it comes again in surface UEFI .please reply me bro its an emergency please help me bro otherwise my uncle will scold me . please help me bro its an emergency
Sorry your having this issue however that’s the video I had the same issue you have to follow the steps in the video but the only difference is the windows you download is for the model of the laptop but everything will work the same
THANK YOU SO MUCH!!! I have spent weeks trying to recover a surface laptop 3 that was stuck restarting over and over after doing a factory reset... I had read so much and watched so many videos but nothing, almost lost all hope and after following your steps it finally worked!! Thank you thank you thank you!!!!!
You’re welcome support my channel by liking and subscribing thanks
Thank You so much! I struggled with this issue for a longtime, but after following your directions, my Surface Pro 4 is working again!
This video should have more visits , it works 100% first try and works , very nice explained and easy to do .
OMG i love this guy, somebody hacked me and now this guy helped me fix it :D what a legend im subbed and liked.
Thanks
Right on the money everything you displayed, said, taking the patience to collaborate this information helped out tremendously highly appreciated.. 💯👍
RESPECT brother!!! alot of %$#$% on the web you showed and explained how to do it from start to finish... HAHA executed nicely. Thanks Again
Tony A thanks bro
Worked perfect thanks so much! Very straight forward. Do not try to use a USB or external hard drive that has stuff on it. Clean USB works perfect. I used 16GB.
My boy you are a king
You’re welcome support me by liking and subscribing thanks
hello, i tried to fully celan the drive but it immediately says that PC cannot be reset.. any thing you can help?
i don't have the option "recover from a drive".....why? :/
Just curious? I've seen about a dozen troubleshooting tips and tricks and a bunch of questions regarding the data. I work for a company where we have a stock of Surface for our users. No pressure to replace a unit if need be. I want to know about "data recovery"? Is there a way to save the data? That's my question? Folks are giving you lots of "High Five" but will this get me to a place to retrieve or restore data
With windows computer I hear a lot about getting loss data not a lot of people know how to get it done and I don’t know how however there are ways to get loss data back I hope I answered your questions
When I do this and it gets to 100%, my surface pro 6 just goes back to the Surface UEFI screen. What can I do to fix this?
Change your boot order
You are very good
Thank you very much
Thank you! this worked
You’re welcome support my channel by liking and subscribing thanks
I have Surface Pro 7 and if I get to the last step for select the disk, it tells me not hard disk available on the machine
I need to do this for my surface pro x but no other pc or laptop would this work if I used an android device or iPhone do download windows to and transfer to usb from there
after cleaning disk part through cmd prompt..i ended up strucking in bios menu which is asking for password.. nothing works . what should i do know ? any idea
I had to disable Secure Boot, manually boot from the recovery USB (you can swipe left on the UEFI devices to force a boot from a specific device), then I had to reenable secure boot and use the Power + Volume Down trick to finally get it to boot at recovery.
Mine is still stuck on the just a moment screen. Please help!
This might be a dumb question but my usb can with things already downloaded too it so do I need to delete those things and have my usb completely bare for the image recovery to work? It was like a vault thing
If the usb is larger than 32GB I would just leave it without erasing
Great video, very helpful
Thanks and please like and subscribe that would be helpful to me
you are my hero! thanks
My surface pro keeps loading to a surface uefi loop. I downloaded the surface recovery image, extracted on to a usb drive. At the surface UEFI screen, I configured secure boot to none and boot configuration to usb and exit. This brings me to a choose language startup, went to troubleshoot and recover from a drive option, tried just remove my files and fully clean the drive, but both ended abruptly at early stage saying problem resetting your pc. Desperate here, any advice/suggestions??
Same thing and had to get my surface replaced. Twice. In 4 months
What have u done ?
I did this method but it keeps taking me back to the Bitlocker Recovery? Did I do something wrong ?
A lot thanks, your the best
I did this and it worked but when I turn off my SB2 and turn it back on again it goes back to the UEFI screen... The only way it boots up is if I hold down the volume down button. Any way to fix this?? I tried to change the boot order and it does the same thing..
i plugged the flashdrive and then got a red lock on to then it asked me for the 48 digits Bitlocker recovery key with no way to find it, i just bought this surface gen 5 model 1796 and this is the first thing i deal with, please help if you know something
I think what you are having is different from the issue in my video
when it means the ssd is damaged or is just a corrupted windows?
My surface pro4 did not continue after choosing recovery options. It's giving me " There is a problem with recovery" notification. Any suggestion about what to do?
Yeah me too, were you able to fix it?
Same did you figure it out?
I was stuck on bitlocker and by trying to bypass it I watched another video on UA-cam which made me use command prompt to clean my hard disk, now I’m stuck in UEFI hope this method will help me ??? Using a surface pro (5th gen 2017 )
did it worked or not ??
Hey my surface 6 won't read my USB it just says enter system password how do I unlock this
Hey so I did the whole process but once I clicked on “fully clean the drive” the screen goes black with the windows logo and shows the percentage and it has been on 1% for like 15 mins...what do I do?
Sometimes it takes a long time that’s why make sure it’s connected on the charger
support me by liking and subscribing thanks
For all ppl that have a problem when trying to install windows, make sure u set the usb stick as recovery drive
HELLO,BUT CAN YOU RECOVER WITHOUT ERASE EVERYTHING???I have lots of stuff on it…please an answer!
Did you manage to do that ?
What do I do when the restart says it didn’t work and nothing was changed to the pc?
I found a better fix to this last night and know the cause of it. The firmware wants to update however for some reason secureboot needs to be disabled. (disable secure boot and after the update has completed enable secure boot) "surface pro 7"
What Update?
Help. I’m on surface pro 5 downloaded the usb thing but I did all the steps, it doesn’t have the circle that it’s loading my usb.... what do I do now? Just stuck with a white windows logo it didn’t read my usb
Shin Lim try to format it and download it back on the usb
DT DailyTech how? Does the usb have to be empty can there be other files in there?
Its still not reading my usb I have re format and download it back to the usb.
I would recommend it’s empty because it needs a lot of storage so I use a 32GB it dosent need all of it but just in case
DT DailyTech I’m also using a 32 and have other random files in there. It just won’t read the usb tho
Does the usb need to be empty beforehand?
Yes because it take a lot of storage
I can t open any windows to search, it's stuck on that Surface UFFI window
Hi, thanks for the video.. its help a lot.. but i still have a problem.. everytime i shutdown and open again without the pendrive it still go to UEFI loop again.. how to fix this?
You have to follow every step in the video I had the same issue but once it works one time then never again
It even works for Surface Laptop right and the download file is 6 gb so 8gb pen drive will be enough right PLS REPLY ASAP
Danke das ist perfekt 👌
Thank you!
Support me by liking and subscribing thanks
Im getting the message " there was a problem resetting your pc. No changes were made" amy ideas?
Thank u bro!
You’re welcome please like and subscribe
Is there a way to recover the files from one of the troubleshoot options? Or am I stuck wiping it? 😭
I’m sure there is but I think it’s a paid service Best Buy I think do it
I try so many times I gave up got the Surface book 2 the restore recovery keep crashing at 99%
Make sure the usb is corrupted and try it again
I will try this and check what will happen. I hope it will work I've been looking for solution for almost a year
When i press recovery, pc show me,"there was a problem recovering your pc." What i can do next?
It happened before try it again it should work
Same problem... did you find a solution for that?
I have got the same issue with my surface pro 6 after I pressed recovery. If any solution please let me know
Same issue here...any help 🥺
i need help when i do it it goes on to 99% then goes back on the blue screen pls help me
Im on Surface UEFI and been trying to restart and back again to the same loop. Im not even sure whymy laptop is on this. Will all my files be deleted? Does this mean I am on factory reset? But i have not done it. Why.....😢😢😢😢
hola buenas tarde link caido como lo puedo descargar
I bought the uefi boot looped surface pro 6 i7 for 370 bucks and tried this method. He better watch this first😂
support me by liking and subscribing thanks
It is not working with me
Is there another solution for the same problem ?!
Bro i have the surface book 3.. should i use the same method?
Same method different image so when you get to choose the type of computer you have make sure you go the one you have
DT DailyTech i have tried everything: it says there’s a problem restoring on this pc...
I’m really pissed.. do you have any contact i will serve you videos and photos. Thanks very much for your time. Much love.
@@roscodotemmas I have the same problem, did you find the solution?
@@KeemV not yet bro.. i think i need to take the ssd out..
Thank you bro
Thanks bro please like and subscribe
Hello, I was wondering if you could help me with a problem I'm having, after I insert the USB and click on fully clean the drive, I get an error message saying, "there was a problem recovering your pc" has this happened to anyone?
Bryan Maldonado make sure the windows you have downloaded on the usb is correct and installed correctly on to the usb
Bryan Maldonado make sure the windows you have downloaded on the usb is correct and installed correctly on to the usb
@@DTDailyTech Update: It didn't work, is there any chance that my ssd is completely dead?
Bryan Maldonado Possibly but I doubt it walk me through your process is your surface stuck at the uefi screen or your trying to format the entire surface
@@DTDailyTech So I turn on my computer, the surface logo blinks a few times and then goes into the UEFI screen, then I click on exit to restart and it sends me back to the same screen. That's usually the case but there are some rare occasions where I turn on computer and it starts windows normally but after a few minutes of use it shutdowns and goes back into the UEFI loop.
You don’t need to DAW load nothing, all you have to do is POWER BOTÓN AND VOLUME DAWN. Restart relished volume then power botón and bingo
Did you use winrar to extract the file?
No I was using google chrome and a usb
My Surface crashes at 1% after I start recovering - any ideas?
Bro i need help please reply me its a serious problem my uncles gift me microsoft surface laptop and now its showing surface UEFI . i just updated my windows new feature and the pc runs smooth 2 hours after updating now. after that i was watching flim and suddenly a notification came and tells that "your pc ran into a problem " and takes me to surface UEFI then i go to exit and clicked to restart . its being restart but it comes again in surface UEFI
.please reply me bro its an emergency please help me bro otherwise my uncle will scold me .
please help me bro its an emergency
Sorry your having this issue however that’s the video I had the same issue you have to follow the steps in the video but the only difference is the windows you download is for the model of the laptop but everything will work the same
@@DTDailyTech now bro my pc is good thank you bro for your suggestion . lots of love from nepal
Thanks I’m happy to hear that
doesn't work for my surface pro 5
Bad thing is that I don’t have another PC :(
I’m sorry to hear that
Use your phone to download recovery image, then extract to USB using USB adapter :)
My all files will be deleted??
Vishakha Bhadane yes
it doesnt read my usb
Try a different usb
Can you please help me sir?