What they don't show you is after you have set the down limit there is a chance the LED lights will turn red and NOT green. The error lights mean that the down limit was not correctly set and has to be readjusted until both lights turn green.
I got two of these and I had an issue with one. It was stuck on red lights, indicating I needed to set the limits. But the down limit wasn't responding well to my button presses. Turns out the "buttons" on the cover are just part of the plastic casting and the real buttons are on the circuit board about an inch and a half away. There are plastic protrusions behind the cover "buttons" that are supposed to engage the PC board buttons, but sometimes the cover can be slightly misaligned. After talking to Genie tech support for a bit, I took the cover off and pressed the real buttons inside to set the limits and they worked perfectly.
You are a life saver. I was going insane trying to program the travel limits and it wasn't working. I did you said and removed the cover and pushed the little buttons on the circuit board by hand and it worked. THANK YOU :)
Thank you so much for posting this video!!! I know nothing about garage doors and mine had been open a couple inches at the bottom for about a week. This was a simple fix and saved me some $$ by having to call out a repair person.
not sure if you guys cares but if you're stoned like me atm you can watch pretty much all of the latest movies on instaflixxer. I've been watching with my brother recently =)
I had this set perfectly then after about two months the door started slamming shut. Tried three times to reprogram the down setting but it didn’t work.
If the door is "slamming" shut, it is likely you have an issue with the spring on the garage door. You would need to reach out to a local garage door company for adjustment
I’m having the same problem please let me know what you find out. I’m on my second opener that is doing the same thing. I have to reprogram that stupid thing every day!!!!!
In my case my 3 year old 7155 motor never revealed the flashing lights. If this happens to you just proceed with the steps in the the vid and hope that it works for you as it did for me..
When I was programming the travel limits, I found the buttons were working the opposite way. The “+” button closed the door, and the “-” button opened it. Do you think this is a problem with the machine, or did I do something wrong?😂
IF they are working backwards then that would mean the bullet that is part of the bullet, is on the wrong side of the rail. Please contact us at 1-800-354-3643
This could mean you have an issue with installation, or the door itself. You can reach out to us at 1-800-354-3643 for more troubleshooting assistance.
Mine was getting stuck when I was pressing the up button to set the limit. Then all of a sudden continuous fast open all the way into the opener breaking the white clip. Did that second time in 6 months after I had ordered new belt and fixed it last time. Seems my unit has a software glitch. Need to get chamberlain instead of this junk
What does it mean if there is a red light when you first plug in the device? I noticed his was green when he was pushing the button but ours turned out red, so I’m assuming there’s an issue?
I just did the up and down limit. The issue is when i hit the open button and let it go comes right up no problem but to close the door i have to press and hold the button and if i let go of the button the door starts to come open on its own instead of closing. Any ideas ?
I did all the settings and got it back down and also to the up position set. However it seems to go up then stop halfway like it’s getting snagged. But then I hit the button two time and it finishes going all the way up. Same thing when going down. Have to hit it a couple times to complete. How much play should the sliding rail be?
Both lights DON'T "turn off" once you press and release the set button; they turn GREEN. WTF Genie, don't you know your own equipment? It even happens in the video! AND IN MY GARAGE! Unbelievably POOR QUALITY.
deponds on which light or if both are flashing red, this could mean the door is out of balance, it could mean the limits are being set backwards, please call us at 1-800-354-3643 and we can walk you through it.
Excellent videos, both open and closed limits. Thanks
What they don't show you is after you have set the down limit there is a chance the LED lights will turn red and NOT green. The error lights mean that the down limit was not correctly set and has to be readjusted until both lights turn green.
Mine keeps turning red after I push set why?
Thank you... Finally someone able to explain this.
@@EduardoHernandez-io5hdmine too, did you manage to fix it?
Yes had two and both did it. Return them and eliminate the frustration because these units are junk.
@@EduardoHernandez-io5hd Need to set the up limit, then once you hit the set button after that it will be all good
I got two of these and I had an issue with one. It was stuck on red lights, indicating I needed to set the limits. But the down limit wasn't responding well to my button presses. Turns out the "buttons" on the cover are just part of the plastic casting and the real buttons are on the circuit board about an inch and a half away. There are plastic protrusions behind the cover "buttons" that are supposed to engage the PC board buttons, but sometimes the cover can be slightly misaligned. After talking to Genie tech support for a bit, I took the cover off and pressed the real buttons inside to set the limits and they worked perfectly.
You are a life saver. I was going insane trying to program the travel limits and it wasn't working. I did you said and removed the cover and pushed the little buttons on the circuit board by hand and it worked. THANK YOU :)
This is great, worked like a charm on my much newer unit!
Thank you!!! Fixed my garage with this video!!!🙏🏾🙏🏾🙏🏾
M n
Thank you so much for posting this video!!! I know nothing about garage doors and mine had been open a couple inches at the bottom for about a week. This was a simple fix and saved me some $$ by having to call out a repair person.
Have a 7055D. We pulled the cord and set the door halfway. As we proceeded to close the door the metal bolt on the belt broke and sheered off.
Thank you!
Worked perfectly. Our door was closing too hard. Did the adjustment and now working.
not sure if you guys cares but if you're stoned like me atm you can watch pretty much all of the latest movies on instaflixxer. I've been watching with my brother recently =)
@Thomas Asa yea, been watching on instaflixxer for since november myself :)
Great video, thanks 🙏👍
I had this set perfectly then after about two months the door started slamming shut. Tried three times to reprogram the down setting but it didn’t work.
If the door is "slamming" shut, it is likely you have an issue with the spring on the garage door. You would need to reach out to a local garage door company for adjustment
Thank you!
Perfect. Great and easy instruction. Thank you.
Can I have the menu on the 2027 genie garage door opener
Can I have the menu of the 2027 genie garage door opener
Can I have the perfect grade and easy instruction thank you
worked like a charm. Thank you so much
I have a brand new model 7055d and the long led light never lights blue, no matter how long I hold it. What’s wrong with it?
Thank you. It’s really helpful
I need help!!!! I been re programming my opener every day!!!! Doesn’t seem to remember the limits!! What can I do!!??
please call us at 1-800-354-3643 so we can assist you further.
I’m having the same problem please let me know what you find out. I’m on my second opener that is doing the same thing. I have to reprogram that stupid thing every day!!!!!
Did you guys get any feedback on what was the issue? Happening to me
@@MrTrane100 they had to replace brain on it
In my case my 3 year old 7155 motor never revealed the flashing lights. If this happens to you just proceed with the steps in the the vid and hope that it works for you as it did for me..
Thank you, very simple to follow. Thanks for sharing.
why does my door stop on every panel going up and down
Thank you for this video.
When I was programming the travel limits, I found the buttons were working the opposite way. The “+” button closed the door, and the “-” button opened it. Do you think this is a problem with the machine, or did I do something wrong?😂
IF they are working backwards then that would mean the bullet that is part of the bullet, is on the wrong side of the rail. Please contact us at 1-800-354-3643
mine gets stuck and starts rattling when i try to go down
This could mean you have an issue with installation, or the door itself. You can reach out to us at 1-800-354-3643 for more troubleshooting assistance.
Mine was getting stuck when I was pressing the up button to set the limit. Then all of a sudden continuous fast open all the way into the opener breaking the white clip. Did that second time in 6 months after I had ordered new belt and fixed it last time. Seems my unit has a software glitch. Need to get chamberlain instead of this junk
I’m not getting power on mine for some reason, trying to set it up
Please reach out to us at 1-800-354-3643
Worked great, thanks
What does it mean if there is a red light when you first plug in the device? I noticed his was green when he was pushing the button but ours turned out red, so I’m assuming there’s an issue?
If you bought a model that has built in Aladdin Connect wifi technology, the red light symbolizes that it hasn't been programmed/set up yet.
Thanks tons, help me adjust the door for my EV charge cable. 1000% helpful, thanks again.
Thank you . Company wanted to charge $400.00 .
Thieves
I just did the up and down limit. The issue is when i hit the open button and let it go comes right up no problem but to close the door i have to press and hold the button and if i let go of the button the door starts to come open on its own instead of closing. Any ideas ?
Ever figure it out? Mine is doing the same thing
It's an issue with the sensors
What if the door does not move?
What is the problem with the one that chain move but it doesn’t close or open ; how to fix that ?
Sounds as if the carriage assembly is disengaged? You can call us at 1-800-354-3643 and we will walk you through re-engaging the carriage.
I did all the settings and got it back down and also to the up position set. However it seems to go up then stop halfway like it’s getting snagged. But then I hit the button two time and it finishes going all the way up. Same thing when going down. Have to hit it a couple times to complete. How much play should the sliding rail be?
after it flashes blue it turns red.
It isn't easy to learn how to install Genie garage door equipment these days.
Setting keypad on my genie model 7035
Well… looks like I’m the only one who’s down button makes the door go UP and the up button makes it to DOWN! What the heck!
Please contact Genie customer service at 1-800-354-3643 for assistance.
I dont have this model so the minus just makes it go down
hey you saved my life brother I was more than an hour wanting to program with video it was easy
TY!!!
My blue light doesn't come on
Both lights DON'T "turn off" once you press and release the set button; they turn GREEN. WTF Genie, don't you know your own equipment? It even happens in the video! AND IN MY GARAGE! Unbelievably POOR QUALITY.
these garage doors are crap in every way.
The garage door was closed release the down button press the set program button, genie flash red what does this mean?
deponds on which light or if both are flashing red, this could mean the door is out of balance, it could mean the limits are being set backwards, please call us at 1-800-354-3643 and we can walk you through it.
Mine just flashes red when I set it
Are you getting two red flashing LED lights, or one? If it is one, is it the small round one, or long LED?
Ok
Literally did that, guess what didnt work. Will never by a genie again
HI Robert, Please reach out to us at 1-800-354-3643 and we can provide you more assistance. thanks!
@@GenieCompany the light on mine is turning red afteri adjust them and push set at the end. Why?
Genie is garbage. Chamberlain is way better and easier to use.
Thnks a lot my friend I watched like 6 videos and your was the winner I finally fixed my door thnks to u hahah 👍👏🫡
Thank you!