Will a Godox trigger for - say, a Panasonic on a G9 fire a Godox flash TT350S (a Sony version)? I just wondered whether the actual trigger is agnostic in terms of other Godox flash units.
These companies need to start including these instruction videos by default. I was reading through the manual for my Godox x2ts and TT350 and didn't understand a thing. Watched your video in a few min and voila. Thank you
Not all heroes wear a cape. You are my savior for this one. i almost throw this trigger out of frustration. New subscriber from Philippines. Hope you are doing well.
@@jojo-gs4wg haha. Thanks Jojo. That was funny. My pleasure. I was frustrated too and kept forgetting how to do it so I made a quick video. Happy flashing. Thanks for the sub 😆
Thank you for explaining the essentials that “Real Photographers” simply gloss over. I have the same setup as you and after half an hour of going through both manuals I saw your video and was up and running in 5 minutes.
Thanks Tony. Yeah the manual that comes with it is so bad. I struggled at first. There is a lot of other things it can do also but fir what i need this will do
This is the ABSOLUTELY BEST Video on how to connect the Godox X2T and my TT350S flash! It is the absolutely best video! You explain everything and in only SIX MINUTES, and now, I am FINALLY up and running with this combination. THANK YOU, THANK YOU!
Coming from using sync cords, big strobes, and a meter in the studio, I found switching to the wireless trigger and speedlights for outdoors a little confusing at first. After watching this quick video it all became easy peazy very quickly! Great post mate - cheers!
Funny ive never used a sync cord. I should buy one one day. Yeah i thought od do a vid to remind myself. Those dodgy manual's they give you are so hard to read 😆. Thabks for comment 👍
@@robdido It blows my mind how much the industry has changed over the last thirty-plus years. Good gear has become affordable and digital plus web tutorials have allowed a lot more people to join the ranks of "pro" shooters, bypassing the traditional route of Art School and then a tenure as an assistant. As a result wages and good-paying gigs have decreased dramatically compared to film days. I am a bit conflicted over the whole issue. Anyway, such is life eh - time keeps marching on and you have to keep up or get left behind. - Cheers mate!
@@drewcunningham2 no you are right. Tech has made most amatures semi pro or wanna be pros 😆 I remember in the 90s i wanted to be a photographer but it was hard and had to go to school etc.. even bloody phones are nearly there.. yes making a living is now hard too
Thanks Edward. Yeah i thought I'd just do a short and to the point without waffling on. The manual they give you is crap. It can do heaps more things but for the basics this is all you need. 😀
You see 🎉 I've been struggling to connect these two devices. I learnt something about scanning because I've always done it not knowing how to read those numbers. Kudos🙌
@@saahhomeboy1863 cool. Prob not critical.. but if there is other people around using channels or interference. Best to pick best channel 😆.. thanks for comment. Enjoy
Thank you so much for your video. I just received my X2T and my head hurt looking into the manual. You kept it simple and super clear. I can't thank you enough, my flash is working 😁🌼👍
You are the man! Video answered exactly what I was trying to figure out. Now i completely understand how it works. Next fun thing will be figuring out how to ad my ad200pro when it arrives. The tt350 synced perfectly thanks to your help.
Damn setting these two up has been a nightmare till I found your channel, many thanks. why would they make these things so difficult to set up? Absolutely nothing makes sense and the manual was zero use. Thanks again Im now shooting happily in manual mode with my x2t and tt350 flash.
haha. you made me laugh. yeah the manual they give us is crap.. took me a while but got it in the end, so i made this to remind myself.. happy share it. Happy Manual modeing 🙂
Thank you so much for going to all the trouble, I have exactly the same Godox setup and have NEVER been able to set it up properly until now. Their site was NO help.
Thanks Roberto, I've been thinking about getting the flash trigger to go with my TT350 O. It seems simple enough. I've been using a cheap remote slave flash with the Godox and firing it from the pop-up flash but your way looks more reliable and versatile. Mind you, my slave flash unit was only £10 and does the job.
Its way overkill for me just mucking around. I too just used onboard flash to trigger. Its handy but really only if your a pro with heapsnof lights erc
it turns on/off the auto focus assist. When on the trigger will emit an infrared beam to help focus and it will turn off the camera AF red light... I think.. I dont use it but I did read that its useless for mirrorless cameras...
Hey, so for a two flash set up, can I say put one flash on Channel A and another on B and have different intensities on both, but both fire at the same time?
I have connected my Fuji X-T2, but somehow it is not firing 100% of the time. It's like it's only firing 70% of the photoshoot time, and sometimes it doesn't fire at all. I am somewhat frustrated. Have I missed something?
Hi, thanks for your tutorial. I have a question please: is using this xt2 on my lumix camera to trigger a godox flash from another brand, for example the Sony tt350s, will this work? Thanks
Hi. I dont own one so not 100% sure but it says it can control any flash with Built-in Godox 2.4G Wireless X System and the sony tt350 has that as to all the tt350 flashes.. sorry cant be 100% sure but it looks like it can
Hello. Do you now if you put a flash on the top hot shoe of this X2T it will take the “group A” settings of the X2T even it is not set to slave mode or it runs separately as a single unit? Second question is if a flash runing on the top hot shoe of this X2T fire if the X2T is turned off? Thank you!
1st Q... yes it worked as a single unit with a tt350 flash but i put a different little flash (fl-lm3) and that didnt fire 2nd Q... No nothing worked when xt2 was turned off
Question, I have a sony a6000. And this exact speed light. My friend told me to buy the godox x1r receiver. However, I cannot get it to work. But it's looking like I bought the wrong thing. And I actually needed to buy this one instead?
Hi you need to check that you got the sony versions. They would be the X2T-S and the TT350-S. The letter determines the compatibility. C=Canon S==Sony O=Olympus N=NIkon F=Fuji P=Pentax
Press MENU button Turn the wheel to go to STEP and press SET Turn the wheel to set it to 1/256 This will set it to the min and you should be able to now go from 1/1 to 1/256
Sorry to hear. Test flash os working on camera fisrt. Then put in ttl on trigger and flash.. frustrating i know. I guess try factory reset on flash trogger and camera and start again.. see how it goes
![Godox X2T Wireless Trigger with V860ii Speedlight Flash [ How to Connect/Link Tutorial ]](http://i.ytimg.com/vi/9BkG3vVNApQ/mqdefault.jpg)
Will a Godox trigger for - say, a Panasonic on a G9 fire a Godox flash TT350S (a Sony version)? I just wondered whether the actual trigger is agnostic in terms of other Godox flash units.
Good question. Not sure. I'll pin this comment to the top. Id anyone here can answer Paul. Thanks
@@robdido Thanks for that.
@@paulbailey6251 I confirm it's working, just tried with a Sony trigger and an Olympus flash and it triggers both in M and TTL mode.
@@avenger333bg That is great news!
👍 team effort 😆 appreciate your support
These companies need to start including these instruction videos by default. I was reading through the manual for my Godox x2ts and TT350 and didn't understand a thing. Watched your video in a few min and voila.
Thank you
😆 i feel your frustration. Took me a few goes to figure it so thought id document it as im always forgetting.. 🤣 thanks for comment
Much appreciated
Not all heroes wear a cape. You are my savior for this one. i almost throw this trigger out of frustration. New subscriber from Philippines. Hope you are doing well.
@@jojo-gs4wg haha. Thanks Jojo. That was funny. My pleasure. I was frustrated too and kept forgetting how to do it so I made a quick video. Happy flashing. Thanks for the sub 😆
Thank you for explaining the essentials that “Real Photographers” simply gloss over. I have the same setup as you and after half an hour of going through both manuals I saw your video and was up and running in 5 minutes.
Thanks Tony. Yeah the manual that comes with it is so bad. I struggled at first. There is a lot of other things it can do also but fir what i need this will do
Exactly
Thank you for being quick and keeping it simple! This video was much more helpful than reading both manuals.
No worries. Yeah that little pamphlet manual you get is pretty bad and the language very confusing. Thabks for kind comment
This is the ABSOLUTELY BEST Video on how to connect the Godox X2T and my TT350S flash! It is the absolutely best video! You explain everything and in only SIX MINUTES, and now, I am FINALLY up and running with this combination. THANK YOU, THANK YOU!
Thanks Ken. Happy to help. Those little manuals they give are so bloody confusing 😆
That was fantastic! You literally saved my life with this video. Please keep going!
@@Foto.Morfose Cool. Happy to help. I need to start doing more flash photography
1 of the only short and sweet flash videos on the net. You made it easy. Thank you.
Thanks. Yeah. I gotta learn to make more like this.. to the point with no bullshit. Its what most people use youtube for
Great video! One additional thing that was messing me up is you need to set the ID to OFF for the TT350 to work.
Thanks Paul.. good catch
This comment saved my life my gosh thank u
it also work for X2T trigger with TT600. thankyou so much👊🏻 you save my life as well
You are a saviour
Finally! Thanks. Done within the first 2mins of this video.
@@marioscicluna6057 cool. Yeah I like the how to vids to get to the point too 😆 thanks for the comment appreciate it.
Coming from using sync cords, big strobes, and a meter in the studio, I found switching to the wireless trigger and speedlights for outdoors a little confusing at first. After watching this quick video it all became easy peazy very quickly! Great post mate - cheers!
Funny ive never used a sync cord. I should buy one one day. Yeah i thought od do a vid to remind myself. Those dodgy manual's they give you are so hard to read 😆. Thabks for comment 👍
@@robdido It blows my mind how much the industry has changed over the last thirty-plus years. Good gear has become affordable and digital plus web tutorials have allowed a lot more people to join the ranks of "pro" shooters, bypassing the traditional route of Art School and then a tenure as an assistant. As a result wages and good-paying gigs have decreased dramatically compared to film days. I am a bit conflicted over the whole issue. Anyway, such is life eh - time keeps marching on and you have to keep up or get left behind. - Cheers mate!
@@drewcunningham2 no you are right. Tech has made most amatures semi pro or wanna be pros 😆 I remember in the 90s i wanted to be a photographer but it was hard and had to go to school etc.. even bloody phones are nearly there.. yes making a living is now hard too
Roberto your instructions work so well. I just blinded myself lol!! These instructions are short and to the point.
Thanks Edward. Yeah i thought I'd just do a short and to the point without waffling on. The manual they give you is crap. It can do heaps more things but for the basics this is all you need. 😀
You see 🎉 I've been struggling to connect these two devices. I learnt something about scanning because I've always done it not knowing how to read those numbers. Kudos🙌
@@saahhomeboy1863 cool. Prob not critical.. but if there is other people around using channels or interference. Best to pick best channel 😆.. thanks for comment. Enjoy
Hands down the best tutorial on the Godox X2T, thank you so much!
No worries. Thabks for kind comment 👍
Thank you so much for your video. I just received my X2T and my head hurt looking into the manual.
You kept it simple and super clear.
I can't thank you enough, my flash is working 😁🌼👍
Thanks. I did a vid to remind myself each time lol as the manual sucks 😆 glad it's helping others too.
Best and easiest tutorial out there, thanks a lot!!!
Thanks. Yeah. The manual is crap so I thought I'd do a quick show. Appreciate the comment 😅
You are the man! Video answered exactly what I was trying to figure out. Now i completely understand how it works. Next fun thing will be figuring out how to ad my ad200pro when it arrives. The tt350 synced perfectly thanks to your help.
Haha.. I love it when a plan comes together.. lol 😆 thanks Anthony.. that 200pro looks impressive
Where operating instructions fail miserably...explained here wonderfully quickly and simply.....Thank you
Lol.. thanks. The manual is frustrating 😆
This video helped me so much. I have the exact same trigger and speed light. You absolutely deserve a thumbs up 👍🏽
Thanks Gem. Much appreciated. Quick and easy best to get it up and running. Hard part is taking good photos.. 😆
It's really helps me set up my TT350C to zinc with XT2 trigger... thanks for guidance...
Thanks. Your welcome. A great flash and very powerful trigger
Thanks man - this was a great and clear instructional guide to a very esoteric set of gear!
Cool. My pleasure. I need to remind myself too each time how to setup 😆
This was exactly what I needed to get this thing going, thank you so much!
Cool. Yeah i keep forgetting so had to remind myself
Damn setting these two up has been a nightmare till I found your channel, many thanks. why would they make these things so difficult to set up? Absolutely nothing makes sense and the manual was zero use. Thanks again Im now shooting happily in manual mode with my x2t and tt350 flash.
haha. you made me laugh. yeah the manual they give us is crap.. took me a while but got it in the end, so i made this to remind myself.. happy share it. Happy Manual modeing 🙂
the exact video i am finding for my newly bought Godox and EM1! thanks bro!!!
Cool setup and camera combo. Thanks Jason. 😊
Short and sweet, best tutorial I found!
Yeah. I made it quick just to get it up and running without need for full tutorial
Good instructional video. I have the other trigger by Godox, but, to be honest, I hardly ever do flash photography.
Same. I bought this 1 year ago. Only just opened it.. lol
Thank you so much for going to all the trouble, I have exactly the same Godox setup and have NEVER been able to set it up properly until now. Their site was NO help.
Cool. Thanks. Yeah took me a while to figure it out and did a vid to remind myself 😆 each time.
Great Video. I used this to configure the Godox X2T Fuji trigger to fire my Godox TT350 Nikon flash. Thanks!
No worries. Thanks for feedback. 👍
is there anyway to still use the distance meter while using this transmitter?
I did not know what that is. If anyone here can help Muddy please 😆
top dollar mate i just got the godox flash and this trigger and now its all set up cheers!
Cool. It's a good allrounder. Robtrek has heaps of tutorials too on using it
@@robdido yes been binging his vids and he also replied with some important info regarding using it with my em10 mkII
Very good explanation - detail and eazy to understand/follow. Godox manual isn't eazy to understand/follow.
Cool..thanks for feedback.. yeah I tried the manual but kept forgetting so did this quick one 😆
Thanks Roberto, I've been thinking about getting the flash trigger to go with my TT350 O. It seems simple enough. I've been using a cheap remote slave flash with the Godox and firing it from the pop-up flash but your way looks more reliable and versatile. Mind you, my slave flash unit was only £10 and does the job.
Its way overkill for me just mucking around. I too just used onboard flash to trigger. Its handy but really only if your a pro with heapsnof lights erc
Why doesn’t my camera connect with the trigger? How do you get the camera icon on the trigger for it to flash when you take a photo?
I have a canon m50 mark ii, tt600 and the x2t trigger
@@MaestroMike is it the xt2c and tt600c for canon ? The "C" is for canon
@@robdido no it’s the s one so for sony I guess. I didn’t know that thank you for the information!
Outstanding tutorial. Well explained!
@@lawrencebeck4777 cheers. Easier to follow rather than try reading the manual each time I forget 😆
Easiest video ever to follow. Thanks
Thanks. Boosted my confidence 😀. Appreciare your kind words
Thank you! I love tutorials like this! Jerry looks lovely as well
Thankyou Roen. My dog Jerry helped me lol 😆 🐕 ワンワン
Thanks for taking the time to make this very useful video.
No worries. Thanks 👍
Thank you for a brilliantly practical tutorial
Glad it was helpful. I use it to remind myself too. Keep forgetting how to set it up... LOL
Very efficiently presented. Thanks a lot.
Your welcome. Thanks for kind comment. Appreciate it 👍🙂
Thank you, do you know maximum trigger to flash distance ?
They reckon it can reach 100m
This was helpfull. By watching this video I got how it works and how to set up 3 strobes.
Thanks. Yes its great for studio setep to control many strobes. 😀 and easy top buttons to change
Amazing! Thank you so much for making such a difficult setup a breeze
Cool. Yeah that manual they gave us was crap 😆
Eu ja estava aqui surtando achando que comprei um rádio incompatível. Esse vídeo me salvou
Fico feliz em saber que você fez isso funcionar. obrigado pelo bom comentário 😆
Loved this video. Many thanks for saving me many more hours of frustration.
😎👏👍
Haha.. I feel your pain.. they make those manuals so confusing.. I had to make a video to remind myself
Nice video. Can the Godox X2T for a SONY, control a Godox Nikon flash?
Not sure prob not. The manuals dont mention it and i cant find anyone who has experimented online.
what is that other ON/OFF button on the side?
it turns on/off the auto focus assist. When on the trigger will emit an infrared beam to help focus and it will turn off the camera AF red light... I think.. I dont use it but I did read that its useless for mirrorless cameras...
Great tutorial, right to the point. Thank you.
Thanks. A quick reminder for each time i set it up. 👍
Thank you so much for this, this got me going super fast!
Cool. It should remember the setting too. I think? So can quickly get up and shooting each time
straight to the point!
Thanks
Cheers. Had to remind myself how to do it each time 😆. Happy snapping
mate you just solved my age old problem thank you so much
Cool. Ykur welcome. Im always forgetting how to sync them
Could you pls show us how to use HSS ? Thanks
I will try and do a vid. In the mean time @robtrek has a video you can check out ua-cam.com/video/YVWuVC65xB4/v-deo.html
@@robdido thank you so much for recomending it , i will see it 😊
Thanks so much! This was super helpful!
No worries thanks for the kind comment 😊
It is very important that the IP setting be in the OFF state, otherwise it simply does not connect
Thanks
Good tip.
Mines not working 😕 it works when I hit the test button but not when it’s on the hot shoe even tho it says it’s detecting the camera on the xt2
Sorry to hear. Try a factory reset of camera maybe that might help. Usually this works
Thanks a lot Sir, you helped me very much !!!! THUMBS UP FOR THIS GENTLEMAN !!!
Thanks for 👍 much appreciated
Cool video! Simople and straight forward
Thanks. I keep forgetting 😆 how to do it haha
Hey, so for a two flash set up, can I say put one flash on Channel A and another on B and have different intensities on both, but both fire at the same time?
Yes that will work. Each channel is independent
What's the battery life of this Trigger and what is your battery capacity?
Not sure really. I don't shoot all day but I read about 3000 photos. The trigger takes AA batteries
I have connected my Fuji X-T2, but somehow it is not firing 100% of the time. It's like it's only firing 70% of the photoshoot time, and sometimes it doesn't fire at all. I am somewhat frustrated. Have I missed something?
Hard to pinpoint. Pick another channel when scanning... Fully charge transmitter.. reboot.. all I can think of.. 😊
Hi, thanks for your tutorial. I have a question please: is using this xt2 on my lumix camera to trigger a godox flash from another brand, for example the Sony tt350s, will this work? Thanks
Hi. I dont own one so not 100% sure but it says it can control any flash with Built-in Godox 2.4G Wireless X System and the sony tt350 has that as to all the tt350 flashes.. sorry cant be 100% sure but it looks like it can
roberto this video is amazing it help me so much . Love it !!
No worries. I keep forgetting how to set it up so made a quick vid.. glad it helped 👍😊
hi sir is there any high speed sync function for godox x2t and godox tt350? do you have tutorial for that too?
Yes it should do it. I'll investigate and try to make a video soon on it.
keep it simple, nice job my friend you help a lot
Thanks Lorenzo. Yeah i always forget and try to keep it set that way so easy next time i use it 👍🙂
Thank U! Simple and fast …
Cool. Thanks David for comment. Once its setup then its set and ready to go for future shoots
What a great tutorial. Thank you 👍
Thanks Paul. Tried to get it all simple as i always forget the steps
@@robdido Mate, I was struggling for hours until I found your video, cheers
That really helped me right now! Thanks.
Your welcome 🙏
Thanks for the video. I understand more now.
No worries. Thanks 👍
Thanks, great help. All sorted now.
Thanks Denis.. all good 👍
Thanks. First video I watched. V helpful
Cool. Thanks Andrew. Yeah just need the basics how to. Now i need to master the flash 😆
Hello. Do you now if you put a flash on the top hot shoe of this X2T it will take the “group A” settings of the X2T even it is not set to slave mode or it runs separately as a single unit?
Second question is if a flash runing on the top hot shoe of this X2T fire if the X2T is turned off?
Thank you!
1st Q... yes it worked as a single unit with a tt350 flash but i put a different little flash (fl-lm3) and that didnt fire
2nd Q... No nothing worked when xt2 was turned off
Thank you! Really helpful.
No worries. Thanks Roxana for commenting. Much appreciated 👍
Question,
I have a sony a6000. And this exact speed light. My friend told me to buy the godox x1r receiver. However, I cannot get it to work. But it's looking like I bought the wrong thing. And I actually needed to buy this one instead?
Hi you need to check that you got the sony versions. They would be the X2T-S and the TT350-S. The letter determines the compatibility.
C=Canon
S==Sony
O=Olympus
N=NIkon
F=Fuji
P=Pentax
Hi.
Recently I purchased X2 T for Nikon Z6. Trigger shoes circle not fit properly n not get that "click" sound. Is it normal or not?
It shouldnt matter click. As long as it goes in hot shoe
How did you get the camera symbol to show up on the trigger?
After i turned the camera on that camera symbol showed up.
Thank you for this video.
No worries 😁 thabks
What if my camera symbol doesnt pop up
See is the x2t is on the hotshoe all the way and locked in. Try putting flash on hotshoe to see if its working ok
Thank you very much for helping me out.
No worries. Thanks for comment. Happy flashing 😆
thanks I wasnt sure if thats all I needed or if I need a receiver also, ok the flash itself is the receiver lol thanks
You can also use the onboard flash of the camera to trigger the flash if you dont have x2t..
Thank you for good explanation👏🏻👏🏻👏🏻
Cool. Thanks for feedback. Appreciated 😀
Thank you, thank you, thank you!
Just thank you.
Your welcome. Thanks for kind feedback comment. 😆
Sir..... I love you, thanks for the tutorial mate
No worries. Thanks. Set it up once and good to go whenever needed
Thanks my friend. 👏
No worries. Happy to share and help 😆
Why can I set 1/256 without trigger, but only 1/128 with?
Press MENU button
Turn the wheel to go to STEP and press SET
Turn the wheel to set it to 1/256
This will set it to the min and you should be able to now go from 1/1 to 1/256
@@robdido This worked. Thank you so much. :-D
For some reason my flash doesn't go off. I followed the exact steps...
Sorry to hear. Test flash os working on camera fisrt. Then put in ttl on trigger and flash.. frustrating i know. I guess try factory reset on flash trogger and camera and start again.. see how it goes
Thank you so much!!!!!!!!!!!!
No worries. My pleasure 😆
Hi sir, i followed all your instructions but i cant sync it to my canon m50.
Is your trigger an x2t-c ... the c is for canon. They are camera dependent
@Roberto Di Donato yes sir, they are supported to canon. my x2tc and the tt350c. but i cant sync them to my camera
@@YdeaProduction see if flash firing is turned on in the canon menu
@Roberto Di Donato jus checked it now sir. it is off and it cant turn it on.
@@YdeaProduction cant think of anything else. I dont own canon.. maybe a full camera reset back to default settings? Sorry cant help more 😞
Súper bien.. Aunque se algo muy básico del idioma inglés..
I don't speak English, but it's very well explained. Thank you
gracias. configurarlo una vez y luego siempre está listo
very helpful man, thank you
Your welcome 👍
thanks i have the same set up
Cool. Nice and easy combo the godex system 👍
i just cant connect my sony a7c with same trigger and glash help😢
Is your trigger and flash the sony version? X2t-s?
thank you for the helpfull video!
Cool. Your welcome. Thanks for kind comment 👍
THANK YOU!
No worries. 👍
Awesome. Thank you.
No worries. Thanks 👍 for comment. Happy flashing 😆
Great video! Thank you!!
You are so welcome! Thanks for kind comments
I did everything as told but still wont work. Am I missing something? Or there’s a faulty?😭 help
Sorry to hear. Is the trigger and flash the same model as the camera? O=Olympus S=Sony etc
Oh I checked and it’s the same. Both (s). So sad I tried it over and over but still not working
@@ejamoto only thing I can think of is do a factory reset on your Sony camera maybe?
thanks mate, it helped me a lot..!
No worries. Thanks for the like. 👍
My tt350 is set to 24mm zoom. It wont change to au mm zoom 😪
I read that the white card panel catch light panel thing can cause this. See if it's pushed in all the way
Why mine is not working? The set up is the same..
Not sure. Maybe try S1 or S2 see which one works?
Is it working now?
thank you!
Thanks Donki.. Your welcome. Its a good trigger and tool. Easy to work with