500hp 12 valve CUMMINs BUILD
Вставка
- Опубліковано 30 вер 2024
- Building a 500hp 12 valve cummins compound turbo beast. This is a completed build of a 12 valve cummins showing you every part and piece you need to make 500 horsepower out of a dodge cummins.
Gator Fasteners heads studs, manifold studs, connecting rod bolts email:
Keepitboosted@racingramfam.com
5x12 injector nozzles: amzn.to/3vYN2f3
coolant bypass kit: www.gstpautopa...
intake horn: www.gstpautopa...
Tappet cover: www.gstpautopa...
Fuel pressure gauge: amzn.to/4d6OrRt
5in exhaust system: bit.ly/DPF-Del...
gt45 turbo: amzn.to/4b1cO11
Racing Ram Fam is a huge inspiration! I wouldn't be building my 5.9l and 46re trans for about 800hp.
That’s awesome!
THIS is what I want to do to my '97 12v. Deep clean, upgrade (and TBH, a new wiring harness).
is this a auto or manual truck, and what did you do to the trans to make it hold power?
Auto and nothing as you can see in the end of the video it started slipping
What size turbos are u using
Hx40 and gt45
What would you recommend for a single turbo with this setup?
Yoooooooo how’s the 5.2 holding up😁😁😁
Sitting in the garage just fine lol
yaaaaaa
Where is the 47re rebuild video?
Long story short rebuilt it, raced it, broke forward piston, now have billet piston and trying to figure out what I want the ending to be
Where are Gator fasteners made? It is not on their website. I assume they are yellow instead of red, white and blue.
How much torque did it make?
Yes
Sweeet, need a trans asap! The stock 47re can barely handle stock torque lol, throw some delivery valves and a rack plug in that baby. What's done to the afc and fuel plate?
100 fuel plate and stock afc atm. Bought a long travel kit, bigger injectors and 191 delivery valves
@@RacingRamFam Gotta slap some full cuts in there and delete the afc, black out the town. I had my 12 valve setup like that with a big single turbo, an airdog and some 5x0.018 injectors, I think I had an issue with my pump. It never smoked like it should have, wish I kept it.
@@robertzarella5907 lol it would be a train! Ya I have some 5x.017 nozzles I’m going to try out
I wish you used more often
Used? Lol
Upgrade that trans, and do some pump work.
Already got the transmission out!
Stay tune for next week
That’s it lmao
@@Angelofdeath-m9n that’s it
Awesome build!!!! Can’t wait to see more
Thanks buddy need that mustang in the next video
I want to try this with a 5.9 Cummins D110. Can anyone advise on the mileage for the stock engine vs the same engine upgraded to like 500-600 horsepower?
I’m seeing 23 mpg now versus 16 when it was stock. I think it’s due to making more power I don’t have to floor it to merge anymore
Hey do you guys have a link or sell the stand alone 5.2/5.9 harness'ss :) I REALLY need one asap for my demo truck
If you email me I can make you one
I see you did governor springs did you upgrade your valve springs too? Also didn’t see anything with your delivery valves and wondering if you have afc live?
@@nathankohl8440 no I just tuned my afc properly with pdd long travel kit, and yes 191 delivery valves and 160lb valve springs
Dude I’ve been watching you and the ol 318 since my junior year of high school huge inspiration especially since I had a 318 I’ve created my own UA-cam and instagram because of you guys too making the videos that I don’t see on Yt. But awesome as always also where is the lawnmower guy 😂
Sitting in my shed waiting to be finished lol
@@RacingRamFam that sucks lol its a cool project
@@BurningTread it will be back
Yup you need a trans! Where you at in MN? It would be fun to hang out at a car show this summer. I just got a mustang but I watch you and gramps truck. I'm in Elk River
Right next to the twin cities!
Gator! 😂 Get money, brother.
Lol 😂
What do you think of putting ones of these on an old car and how’s my full tube chassis truck?😊
Maybe! There’s a lot of money to win in diesel racing up here! And good going to start working on it again probably next week
Ironically enough I came across your videos when I was working on a beater white 96 1500 rclb 318/nv3500 truck with the bright plan of turboing it and it ended up with just a rebuild and a few NA upgrades. Then I recently bought a 96 12v/nv4500 and turns out you post a video with a 12v. I definitely need a tappet cover mine is all bent up!
Awesome! And ya the gstp ones awesome just make sure to run a thin bead of silicon around the seal when you install it just for reassurance
Man how do you make sure your tig parts don’t change size and do you tack them on the car
Yes! Try to do most of my welding with it installed
👍💪💥
@@TheProchargedmopar 🧨
Hell yeah 12 valave monster!
We have a 73 Power Wagon want to drop a 12v in there!
Ya there very fun to mod! Just slap stuff on it and go drive it and it works! Can’t say that about gas stuff lol
650hp.....🤔
700hp lol 800hp all the horse power
GET.
IT.
ON.
Didnyou give up on tube chassis for Whitie?!
Absolutely not! I just needed a new daily driver and I don’t want to buy a new truck so I built this beast!
Hell yeah man keep it up 🤙🏻
Thanks big dawg
The plastigauge😮 great stuff
Big facts
can’t wait 🎉
Well what did you think??
Never heard of gator studs before. Im running xotic solid studs
Ya I’ve heard lots of horror stories from xotic. I’ve watched a lot of testing on Chinese studs and there pretty trash. Better clamp load from factory bolts
I have busted several Xotic studs. They are good to about 600hp tops. The lift after that. They warrantee the studs, but it still dont cover the cost of the result of said failure. I made a short on it a while ago.
@@BentonL ya can’t warranty junk lol
@@RacingRamFam They can, but you will be doing a head gasket again and potentially having to replace bearings. I am now on the 625 alloy studs. I learned my lesson a while ago. But I had put these studs in a lot of trucks. All the trucks with 500 or more HP have broken studs. They dont stretch they just snap when they lift. Usually in the middle.
@@BentonL you can’t fix broken is what I’m trying to say. If somethings junk doesn’t matter how many times your get it warrantied out it’s still junk
My 98 5.2 cries watching these videos, lol. Awesome vid
My 5.2 is sitting in a tube chassis just chillen lol 😂
Gotta her my 96 12v back on the road
@@williamhunt9115 do it up
Let’s see it in a dyno to believe them numbers
@@brianconnor5213 butt dyno verified
What exactly is the turbo setup?
Hx40 and a gt45
I'm running the same, 550 h 850 FP.
Set wastegate at 70psi.
Eats tranny's
Any updates on the 4.0L magnum?
Scrapped it
@@RacingRamFam damn, why??
@@Arctyy I only have so much time in a day so the projects that I wasn’t really motivated about I got rid of. I still have the engine tho
"Building a 500hp 12 valve Cummins compound turbo beast" a.k.a., a mild tow rig.
It never goes so it’s a turbo beast lol 😂
Solid video
Thanks dawg
get that bag babbyyuyy 😍😍
What bag lol I give away the bag lol
@@RacingRamFam wait what lol
@@22KiwiKiwi I really don’t know what I was going for there in that sentence lol 😂
@@22KiwiKiwi yes yes yes that’s what
Babin's checking in
What’s up buddy how are you doing?
@@RacingRamFam not shit man, doing good!
@@andrewjb98 I see your a uncle that’s exciting! How’s the family business doing? Staying busy up there?
@@RacingRamFam yeah man its pretty crazy. I also witnessed you had a few extra pounds in your back seat during the 0-60 😉 that's pretty awesome! And we have been so-so. Nothing amazing but we are still selling and I'm still cleaning and doing appointments 🤙
@@andrewjb98 that’s awesome! I miss old fury days lol
do you adjust preboost screw all the way out, all the way in, did you tune it? did you adjust afc housing back or forward?
@@tunedupoutdoors yes I tuned it. It has a pdd long travel kit, number 10plate. Everything was adjusted in the middle then moved from there depending on smoke output