Teryx Dash Removal - Get Started with Wiring Accessories
Вставка
- Опубліковано 7 лют 2025
- This video is the first in a series related to wiring accessories in your UTV. While this video is related to the Teryx, we always recommend if you want clean, well done wiring, remove your dash and get the job done right!
Auxbeam LED Light Bar 4" 18W LED Pods: amzn.to/2Ns8IFt
Oplips 52" 300W Led Work Light Bar: amzn.to/2U4hKLC
4 Pack Seat Belt Pads: amzn.to/2SpYhmP
Chupacabra Offroad Rear View Side Mirror for UTV (Pack of 2) amzn.to/2U8bfY9
Tusk UTV Street Legal Horn and Blinker Kit: amzn.to/2Xnko10
SuperATV Kawasaki Teryx 750 4/800/800 Wheel Spacers: amzn.to/2Uczpko
SuperATV Windshield: amzn.to/2H2ODof
Horizontal Roll Bar Clamps: amzn.to/2EuUO2w
Vertical Car Clamp: amzn.to/2H2LdSf
Rocker Switch Voltage Meter: amzn.to/2Ew9Bu2
Bestgle Self-Stripping Electrical Connectors: amzn.to/2Xn16sx
MICTUNING 5 Pin Rocker Switch: amzn.to/2H8AmXh
2" Roll Bar Clamps: amzn.to/2UaykcE
MICTUNING LED Light Bar Wiring Harness: amzn.to/2Ewthhc
GS Power's ROTA Bracket Clamp: amzn.to/2Ec25D9
Rear Light Pod Switch: amzn.to/2Earzkk
Roll Bar Cup Holders: amzn.to/2EyJVgp
E Support Car Blue LED Bar Light Toggle Switch: amzn.to/2H7G5w6
Assorted Heat Shrink Pack: amzn.to/2NvKZEl
Heat Shrink Solder Wire Connectors: amzn.to/2EwH73l
Tusk Terrabites: derangedoffroa...
M33 wheels: amzn.to/2UazdC0
12-Way Fuse Block W/Negative Bus... amzn.to/2DfXSPh
Interior Light Switch. amzn.to/2UBNhZs
5 PACK 40/30 AMP 12 V Relays... amzn.to/2ZfaVKc
WEBSITE: derangedoffroad.com
CONTACT: derangedoffroad1@gmail.com
so, i have to remove half of the front end to install 2 rocker switches. awesome.
good video btw.
Yep not the funniest machine to work on.
This was awesome. I’m a new teryx4 owner and these videos are great. Installed a winch this weekend and it went smoothly thanks to you guys
No problem, if you need anything let us know. - Garrett
How has the fuse box held up being Velcro’d to the air filter cover?
You need to get the right stuff, but so far it’s been completely fine two big rides in now with it.
Thanks again
New to me teryx owner, was trying to clean up wiring mess from previous owner installation of mood lights, battery reconnect have to fuse box or key switch, unit has had battery installed under driver, original is still there but disconnected and cobbled into wiring to relocated battery, good vid to show procedure, also this unit has relocated radiator on top of hood which is a major PAIN IN THE BUTT to get off
Thank you for showing us, it will help me out a ton!
Thanks I was looking at how to do that last weekend. You guys rock.
Stay tuned, we have some other installs coming soon for a few other accessories.
-Garrett
Deranged Off-Road
My drivers seat on my 2017 teryx 4 slides around when I ride. I stop and push the pin back down to hold it in the back position but it comes up and the seat slides. Have you had this happen? Or am I missing something under the seat? Thanks
Mine started to do that the first week I got it. You could put a bolt with a nut in its place so it stays in one place. I never have the need to move mine anyways.- Garrett
Great content here! Thank you for simple but thorough at the same time. Guys like me are watching this mid project
Thanks for the input and thanks for watching!
-Garrett
Info on where you would put a 8 gang switch controller and fuse box under hood in a teryx. ? I got my fenders all off tonight. Adding 8 switch panel, whips, rock lights, bars on roof and bumper, mirrors and pods in rear I think. Thanks!
On top of the plastic plate above the radiator would work great for that. It will keep it out of the elements and easy access. -Garrett
@@DerangedOffRoad Is that piece something you could mount to? Or did you add something on top of that. Access to the wires closest to the airbox ? Do you have any pics of yours ?
@@thomasrichardson4103 you can mount to it, it’s strong enough. I put my relays on it and my fuse block on my air box. If I had a gang switch panel, I would have put it where my relays were.
Any videos on wiring the relays? I noticed the link for the 5 pack. Does each accessory need a relay? Kinda new to this but I love that idea of the fuse box! 🤙
Sorry I didn’t show that. Most wiring harnesses will come with a relay. I added those in case someone wanted to make their own setup. I liked to use the relays with the fuse box personally. -Garrett
@@DerangedOffRoad Do you use the four pin or five pin relays?
Nice! I just bought a 2017 and am getting ready to outfit and install everything at once. this will be a handy video when that time comes. Do you wire all your lights straight to the battery? I have seen another video out there on partzilla where they actually installed a new fuse box, I would like for everything to work only when the ignition is on but I read that it may put too much voltage or amps through that ignition switch. What are your thoughts?
I actually have a fuse box video coming out soon. I’m moving everything over to the fuse box and not the battery anymore. Everything will run through a rocker switch which a lot are rated for 20 amps. I use relays for most of my stuff , but wired the rocker switches into my ignition with no problems. My set up has worked over a year now. - Garrett
Nick Gravina - man you rock! I can’t wait to see it. Thanks again!
Question. I’m installing a winch on my teryx. I have the dash panel removed and I want to splice into the accessory outlet for keyed power. As you know I can get my hand in and reach where the wires connect to the back of the plug. Now, do they pull out or do the plug itself release somehow. I’d like to have it out to do a good job on the splice. Or is there a better way? Thanks.
Actually just splice into the 12v cigarette power it’s on key power already and easier to get to. -Garrett
I need to know how to replace the glovebox
How did you cut the holes for the switches
Just with a razor blade. Just make sure to use new sharp ones.
Where is the best location for switched power on a 2020 Teryx 4? Putting in a fuse block but want switched and not constant power for fuse block.
12v plug on the passengers side. 👍-Garrett
Do you need to do this to wire a winch up with a dash switch?
You can just remove the center dash area to do that, no need to take the whole dash apart for that.
Did u ever have any issue with he key ignition? Mine gets lose and starts to spin when I turn to start it
No not at all, look behind the dash and see if the nut needs to be tightened on yours. -Garrett
@@DerangedOffRoad appreciate it, after removing the dash it was super easy just needed to hold the backing while I tighten the nut from the outside. Thanks again Garrett.
What size are the body panel push pins on the Teryx? I'd like to order some to have on hand for when I ruin one on removal.
Can’t remember the size but here is the part number from Rocky Mountain ATV
#1455640001 Made by Tusk 👍
@@DerangedOffRoad Thanks. It looks like they are 8mm.
Hey man. Great videos. On your 5 pin led rockers where do you run #6. I want the leds to be off when not running. Thanks.
You will want to run number 6 on its own wire to the ignition wire. I put all 4 rocker switches on one wire in a series to the ignition. Then it will light the rocker switch when you turn it on. Also I just put heat shrink to cover the little jumper wire that would go on number 6 if using the five pin harness. -Garrett
Excellent. Thanks for the answer!
I’ll have a rock light install video out soon , which will show it. Thanks for watching-Garrett
How to key switch out
Finding the key switch power?
Thanks for posting this! I have a 2018 T4 and about to put the winch and stereo system on. Would you suggest putting the amp and fuse block behind the dash? I was wanting somewhere that will keep it hidden and not under my driver seat.
Haven’t figured out my amp placement yet, but would put the fuse block somewhere it’s easy to access. I put it on top of my filter box and it works great and stays dry from water and mud there. Also it is easy to work on. So That would be my recommendation is somewhere easy to get to but away from the elements. -Garrett
The loud background music really doesn't enhance your videos, IMO. Jus sayin'.
Wrong one/year.!! Absolutely no help at all!!!!!!!!!
This process can be used on any machine. Also if you have an older year Teryx it’s pretty much the same under the stash.