After weeks of searching for kits, most of the good ones are sold out or are super delayed shipping, I nearly pulled the trigger on some that weren't as versatile as this one. Once this one stumbled into my vision, I was surprised that it met nearly every aspect I wanted, and was willing to pay considerably more for just a kit with more limitations before. I bought this one in a heartbeat. I don't plan on doing too much mod work, but the possibilities are clearly there. And the base you get is superb on its own.
This video is truly amazing. This is a master class in keyboard modding. Thank you for the incredibly high quality videos that explain in just a few minutes what would take hundreds or thousands of words in an article of how-to. Keep up the incredibly high content. Absolutely crushing it!
@@vigotogar Yes it does when he is putting this much work into making it perfect. Balancing the wires helps(along with the lubing) eliminate any of the rattle that might happen when keys are pressed.
@@vigotogar I have not personally done it but I have typed on a board that has. I can not give you a concrete yes as there is more than just 1 factor to that. The lupe, balancing, quality of stabilizer all matter.
Hi, new to mech keebs Q: What are you doing to the battery at 1:07? Q: How do you know where to cut the stabalizers? Q: Whats going on at 4:17? Thanks!
@@3ildcat ur my 1st keyboard mod channel i watched, im basically new to this but what's the ratio in the 1st krytox mix or is it the same in the 2nd one you mixed?
@@alyzzagailmicabalo2385 krytox 205g0 is basically 205g2(or normal 205) mix with 30%-40% 105, personally speaking the viscosity is similar, and he adding 1:1 ratio of krytox 205g0 and 105 into his 205g0 + 105 mix so make the ratio of dilute effectively into a 70%ish 105 and 30%ish 205g2 mix which is more liquid like and easier to use edit: the one he use for stabilizer is different kind of lube edit 2 : you can treat the 70% 105 and 30% 205 as 205g00 which is thinner lube than 205g0 but still a grease which will stick to the surface instead of and oil which will sink into the bottom housing over time
Finally!! Waited for this, ordered the same keyboard because of your video! :D And do you think I should spray lube, cause I never lubed any switches (I never opened one). Maybe spray lubing might be better for an newbie? (BTW. I'm "Sasuke Uchiha" from the other video, maybe you remember me :) )
Aha you changed the name! It's totally up to you. If you want to spray lube, shake well before applying and if you can, pull the switch out first. That would be better for keeping the plate clean.
@@3ildcat okey thank you! No this is just my first account :3 I have a non used keyboard which is, for some, hottswap, so I would use that board for the spray lubing so the plate won't get dirty :D
I recently got into exploring keyboards and switches after getting tired of my keyboards with MX switches. Now I can't stop watching. I am in the search for perfection.
I just got this keyboard today after seeing your video, wow this keyboard feels amazing. I'm still not used to the arrow keys but the brown switches it came with sounds so nice, I don't think I need to lube it. Also the spacebar on mine is perfectly fine, the only button that has a little rumble on mine is the backspace. I have bought quite a few keyboards over the past few days but this one has been by far the best to type on. Not sure if its the switch or the keys. Ughh if only they came out with a 87 key version of this!
I know this is a keyboard build/review channel BUT I can't express how much I would appreciate a video with JUST typing sounds, like, an hour long one or so..
Gonna do this once my K6 arrives, although it looks like it’s gonna be a hot minute. Also, do you always mix the two lubes for the switches, and use a separate lube for the stabs?
I watched it without breathing whooa! What a long journey to get a fancy keyboard sound. I'd like to customize my keyboard someday and i know it won't happen😏 한글 타자 치실 때 묘하게 빠르고 강해지는 거 저만 웃긴가요 역시 빨리빨리 민족ㅋㅋㅋㅋ ㅋㅋ
@@ryan9818 Not who you were asking, but I also recently just got this keeb. This is my first keyboard, and its a great prebuild for beginners from what I can tell. The factory lubing is pretty good, and the build is sturdy. I plan to replace the keycaps soon because the ones that come with it are a little bit ugly. I don't really have any complaints for this board, so I would definitely recommend it for those who don't want to heft out the price for a custom.
4 роки тому+1
@@ryan9818 Got it yesterday. Mine came with 5pin hotswap instead of 3pin. Works great so far. Software is in beta and buggy. This is only my second mechboard so im not the most xp guy with these keyboards, but i really like it. It is very satisfying to type on compared to all my previos keyboards that is for sure.
I can't wait for my snow fox to come and mod it while using your video as reference!! your other video made me buy one :) also I'ts gonna be my first time modding a keyboard so wish me luck :)
After binge watching a lot of your videos, I've finally decided to get myself a mechanical keyboard! I want to start with the Kemove snowfox for the bluetooth and hot swappable feature which would be a good way for a beginner like me to explore. Like your modded womier video, I hope to mod it with the pom jelly caps and holy panda switches one day! Do you think this is a good start 😊?
I love it! I think I’m going to get this keyboard and do the same things as you did, and I will also add the white pudding keycaps from hyperx. Love your work, keep it up!
It's Doro desk mat. (in the description) As I am not Chinese, I used a freight forwarder. Sadly hard to get.. item.taobao.com/item.htm?spm=2013.1.20141001.1.6d7a252a74Xs97&id=587143973122&scm=1007.12144.95220.42296_0_0&pvid=a6292b85-ea22-4a8a-8a75-6457bf41e623&utparam=%7B%22x_hestia_source%22%3A%2242296%22%2C%22x_object_type%22%3A%22item%22%2C%22x_mt%22%3A0%2C%22x_src%22%3A%2242296%22%2C%22x_pos%22%3A1%2C%22x_pvid%22%3A%22a6292b85-ea22-4a8a-8a75-6457bf41e623%22%2C%22x_object_id%22%3A587143973122%7D
:3ildcat thank you! I just got the 205g2 and shopping for 205g0. Also ordered Holy Clears. I really appreciate your channel, I’m new to the keyboard customization scene so I enjoy watching your videos while I’m at work for both relaxation and education.
This has made me so excited to get a Kemove keyboard! Gonna start investing in some of these tools also. Where'd you get the key cap holder? That looks soo helpful for lubricating the switch units.
지금 앤프로2를 사용 중인데 kemove61로 넘어갈까 생각 중입니다. 블루투스 5, 더 큰 배터리, 그리고 hot swappable이 맘에 들고 무엇보다 약 20불정도 저렴하네요. 앤프로2를 환불할 수 있어서 넘어가려고 하는데 와캣님의 생각은 어떠신지요? 간헐적으로 앤프로2가 끊기는것도 약간 거슬리네요. 영상 항상 잘 보고 있습니다 :)
블투가 끊긴다면 환경적인 이유로 다른 블투도 끊길 수도 있어서 그부분은 넘어가고, 큰 배터리나 디자인, 핫스왑이 더 맘에 드신다면 괜찮을 것 같습니다. 개인적으로 앤프로1&2 외에는 무선 키보드들 다 별로 안좋아하는데 키무브 만큼은 포장부터 제품퀄까지 생각보다 괜찮았습니다. 무선기능은 앤프로나 키무브나 영상용으로 외에는 잘 안쓰는 기능이라 따로 말씀드릴게 없네요..
greatvid! few questions here ? - is the keyboard too pretty high or is it ergonomic enough to require wrist rest ? - is the layout completely standard ?
![Don’t get the Gateron Optical Yellows! Get these instead! [GK61]](http://i.ytimg.com/vi/dCqZy_K7fkA/mqdefault.jpg)
I love the intros so much, I don't know who in their right mind would skip them!
@Naoto ;-;
I just want to see his insane typing skills
@Naoto what a psychopath omg
me
best intros in all of youtube.
The "after" sounds really, really nice.
I just ordered this keyboard and definitely will do these mods if it makes it sound good.
I do wish he had done a sound test before he modded it.
@@stopthephilosophicalzombie9017 He did, check the description.
@@TheChadillac My bad.
Everybody gangsta till he starts typing in Korean
KamilxHueHue stfu stolen
Rizzy Playzz its not stolen one person comments it every vid
Imagine how many keyboards this guy just has laying around his house
The after typing sounds were like straight up ASMR for me. I could listen to that for a while.
How fast can you type in Korean?
Wildcat: YES
The Korean Taeha Types
..oh wait
lol
lol
lol
lol
lol
Wildcat: Let’s mod the Kemove 61 SnowFox
Literally rebuilds the entire keyboard.....
The production quality on this channel is just top notch.
This is sick! I really like these modding pre-built videos. Keep it up!
rewatching your old videos! glad to see the improvements compared to your new ones ♡
After weeks of searching for kits, most of the good ones are sold out or are super delayed shipping, I nearly pulled the trigger on some that weren't as versatile as this one. Once this one stumbled into my vision, I was surprised that it met nearly every aspect I wanted, and was willing to pay considerably more for just a kit with more limitations before. I bought this one in a heartbeat. I don't plan on doing too much mod work, but the possibilities are clearly there. And the base you get is superb on its own.
What did you buy from the kit? I see a couple listed, but is the grease the only thing you need?
This video is truly amazing. This is a master class in keyboard modding. Thank you for the incredibly high quality videos that explain in just a few minutes what would take hundreds or thousands of words in an article of how-to. Keep up the incredibly high content. Absolutely crushing it!
Each video is more amazing than the last !
Thank you
why havent u blown up already.... u produce incredibly high quality content
That Intro is wonderful! I love your videos, keep up the amazing work!
Thank you so much!
Omg i've been waiting for this since I just got myself and my brother this keyboard. Thanks so much!! I ordered because of your previous video!
6:10 why didn't you add any foam? you usually do it, is it not needed on the snowfox?
It's just an option so just tried without foam
I was waiting for this video so bad, good video!
Glad you liked it!
Oh :3ildcat lemme ask, is your typing fast among Koreans or is it just us English noobs who are slow?
he's fast
don't lump me in with the slow typers I type at a consistent speed of 2 wpm
Im fast as fuck boyyyy
I am not sure
I think just a bit faster than average?
:ooo I finally got a heart. -crys in english-
I love how he uses an iphone to balance the wires
does balancing the wires matter?
@@vigotogar Yes it does when he is putting this much work into making it perfect. Balancing the wires helps(along with the lubing) eliminate any of the rattle that might happen when keys are pressed.
@@keeperkell13 have you done it? if so, does it eliminate the "ping" sound while tapping it lightly?
@@vigotogar I have not personally done it but I have typed on a board that has. I can not give you a concrete yes as there is more than just 1 factor to that. The lupe, balancing, quality of stabilizer all matter.
@@keeperkell13 oh i see okay thanks!
항상 잘 보고있어요!! 다음 영상 기다립니당☺️
Hi, new to mech keebs
Q: What are you doing to the battery at 1:07?
Q: How do you know where to cut the stabalizers?
Q: Whats going on at 4:17?
Thanks!
1. Just looking around
2. Pause 1:43 and look carefully
3. Because of the big front bumps, hard to use the opener
:3ildcat thank you :)
@@3ildcat ur my 1st keyboard mod channel i watched, im basically new to this but what's the ratio in the 1st krytox mix or is it the same in the 2nd one you mixed?
@@alyzzagailmicabalo2385 krytox 205g0 is basically 205g2(or normal 205) mix with 30%-40% 105, personally speaking the viscosity is similar, and he adding 1:1 ratio of krytox 205g0 and 105 into his 205g0 + 105 mix so make the ratio of dilute effectively into a 70%ish 105 and 30%ish 205g2 mix which is more liquid like and easier to use
edit: the one he use for stabilizer is different kind of lube
edit 2 : you can treat the 70% 105 and 30% 205 as 205g00 which is thinner lube than 205g0 but still a grease which will stick to the surface instead of and oil which will sink into the bottom housing over time
@@get_troll thanks i understand a lot!
Finally!! Waited for this, ordered the same keyboard because of your video! :D And do you think I should spray lube, cause I never lubed any switches (I never opened one). Maybe spray lubing might be better for an newbie? (BTW. I'm "Sasuke Uchiha" from the other video, maybe you remember me :) )
Aha you changed the name!
It's totally up to you.
If you want to spray lube, shake well before applying and if you can, pull the switch out first.
That would be better for keeping the plate clean.
@@3ildcat okey thank you! No this is just my first account :3 I have a non used keyboard which is, for some, hottswap, so I would use that board for the spray lubing so the plate won't get dirty :D
I need to get some of this modding gear. That slider picker and lubing station look amazing!
I recently got into exploring keyboards and switches after getting tired of my keyboards with MX switches. Now I can't stop watching. I am in the search for perfection.
What a difference of the space bar, sounds amazing!!!
Ngl your like to dislike ratio is insane. People must really love your channel, I know I do. Keep up the great work!
I appreciate that!
Just got my shadow in the mail today, sooo excited to mod it tomorrow, thanks!
Also nice typing 😳
Noce build.
Can't believe this video will turn 2 years old in May
I just got this keyboard today after seeing your video, wow this keyboard feels amazing. I'm still not used to the arrow keys but the brown switches it came with sounds so nice, I don't think I need to lube it. Also the spacebar on mine is perfectly fine, the only button that has a little rumble on mine is the backspace. I have bought quite a few keyboards over the past few days but this one has been by far the best to type on. Not sure if its the switch or the keys. Ughh if only they came out with a 87 key version of this!
Nice!
I know this is a keyboard build/review channel BUT I can't express how much I would appreciate a video with JUST typing sounds, like, an hour long one or so..
Me: Hey I kinda want that keyboard
My money: No u
sum cheaper one's on amazon & banggoods (hope you're ready to wait a month) but their are cheaper options out!
It’s a not funny joke
@@M4TTYN Oooof a month?!
rk61 is a good, cheap choice (AU$70 on Banggood)
@@ingalam2893 who asked?
Something about this, is so, Aesthetically Pleasing....
The lubing tools are some of the most convenient things i have seen
Amo tus vídeos 😍😜
Damn i never knew the xiaomi wowstick existed tysm for showing it :)
Great vid as always b
i remember when u barley had any subscribers. Congrats bro 100k on the way🕺🏽💕
Thank you so much
That made it sound SO much better
Damn, you have beautiful hands, it's so mesmerizing to watch these videos
was waiting for thiss!! Thank you so much🥺🙏
how does one call the little thing by your desk at 0:24? looks so handy >_
Why do you clip the black pieces at 1:30? Thanks for all the great content!
Gonna do this once my K6 arrives, although it looks like it’s gonna be a hot minute. Also, do you always mix the two lubes for the switches, and use a separate lube for the stabs?
not always
you will know if you watch my other mod videos.
Just testing new type of krytox mix.
Just bought that one, should arrive in next three weeks to me. Good videos, just as always
Dude I watched the intro like four times...that’s bad ass! LOL it’s the little things in life you know? Pun intended
7:02 SHEEEEEEEEESH the sound test!
Why is everything you do so satisfying
Awesome video thanks! Also what tape do you use for the stabilizers?
I watched it without breathing whooa! What a long journey to get a fancy keyboard sound. I'd like to customize my keyboard someday and i know it won't happen😏 한글 타자 치실 때 묘하게 빠르고 강해지는 거 저만 웃긴가요 역시 빨리빨리 민족ㅋㅋㅋㅋ ㅋㅋ
It sounds buttery smooth!
YES this is my keyboard!!
I got this keyboard after watching this video.
@@gamerman708 how was it?
@@ryan9818 Not who you were asking, but I also recently just got this keeb. This is my first keyboard, and its a great prebuild for beginners from what I can tell. The factory lubing is pretty good, and the build is sturdy. I plan to replace the keycaps soon because the ones that come with it are a little bit ugly. I don't really have any complaints for this board, so I would definitely recommend it for those who don't want to heft out the price for a custom.
@@ryan9818 Got it yesterday. Mine came with 5pin hotswap instead of 3pin. Works great so far. Software is in beta and buggy. This is only my second mechboard so im not the most xp guy with these keyboards, but i really like it. It is very satisfying to type on compared to all my previos keyboards that is for sure.
@ Thank you for the info. I might get the GMMK white ice maybe.
that after lube sound so good
와 벽긁는소리 사라진거 대박이내요ㄷㄷㄷ
차이 미쳤다ㄷㄷㄷ
게적순정은 못들어줄 정도내요;;
Which keyboard would you prefer This or the Anne pro 2?
I don't know what pulls me to these videos..... But I like it
Everybody gangsta till :3ildcat starts typing in Korean
I got this keyboard, because of your review, thank you!
Do you remember where you got that cute little desk caddy at 0:24 ?
just from a common dollar shop in Korea
This is great, I was just thinking about modding mine!
I can't wait for my snow fox to come and mod it while using your video as reference!! your other video made me buy one :)
also I'ts gonna be my first time modding a keyboard so wish me luck :)
Good luck :3
After binge watching a lot of your videos, I've finally decided to get myself a mechanical keyboard! I want to start with the Kemove snowfox for the bluetooth and hot swappable feature which would be a good way for a beginner like me to explore. Like your modded womier video, I hope to mod it with the pom jelly caps and holy panda switches one day! Do you think this is a good start 😊?
Whenever you are satisfied, who can say it's not good? :3
1:35 저기는 왜 자르는건가요?
그리고 혹시 풀윤활하시는데 얼마나 걸렸는지 알 수 있을까요?
저 튀어나온 부분이 pcb를 건드리면서 깔끔하지 못한 소리를 냅니다. 저렇게 잘라주면 해결됩니다.
도구나 숙련도에 따라 시간편차가 제법 있습니다. 예전에는 4시간 넘게 걸렸는데 요즘엔 1~2시간 안에 끝냅니다.
Please tell me what did you use to stick to the plate?
2:47
common fabric tape
@@3ildcat thanks, you're the best
This entire thing is asmr 👌👌
OMG I want to buy one of your keyboards your work its amazing
I love it! I think I’m going to get this keyboard and do the same things as you did, and I will also add the white pudding keycaps from hyperx. Love your work, keep it up!
good luck :3
Nice video! Btw where can I buy that mousepad it’s pretty cool
It's Doro desk mat. (in the description)
As I am not Chinese, I used a freight forwarder.
Sadly hard to get..
item.taobao.com/item.htm?spm=2013.1.20141001.1.6d7a252a74Xs97&id=587143973122&scm=1007.12144.95220.42296_0_0&pvid=a6292b85-ea22-4a8a-8a75-6457bf41e623&utparam=%7B%22x_hestia_source%22%3A%2242296%22%2C%22x_object_type%22%3A%22item%22%2C%22x_mt%22%3A0%2C%22x_src%22%3A%2242296%22%2C%22x_pos%22%3A1%2C%22x_pvid%22%3A%22a6292b85-ea22-4a8a-8a75-6457bf41e623%22%2C%22x_object_id%22%3A587143973122%7D
WOOW this man even likes alll the likes . That’s the kind of stuff I would subs !!
+1 for showing the tools of the trade. So cool!
The slide picker is actually a metal clutch pencil :)
Love your keyboard sound as always. Thank you for your video. Keep do it.
Thank you too!
I like your videos they are so chill and relaxing
매번 잘보고있습니다!!
yessssss, i was waiting for this video :D
This what im waiting for 😍 always satisfied with the result. Maybe you wanna try tecware phantom elite tkl next?
love ur vid work!
do u prefer this or the anne pro2?
Thanks!
I prefer hardly 'modded' ap2
Awesome video! Was there a reason why you didn't add a foam layer?
I prefer using foam but some have asked how about without foam so I just tried but in the next video, I added anyway. lol
You're amazing! I really enjoy your videos!
Glad you like them!
8:58
"Practice makes perfect"
As soon as he pulls the mat you know shit about to go down
Do you now do youtube fulltime?
I think so
sounds infinitely better :D
It seems so much easier modding hotswap keyboards than desoldering
Bought this keyboard, then watched this video. I'm so excited for it to arrive now.
Good luck!! :3
:3ildcat thank you! I just got the 205g2 and shopping for 205g0. Also ordered Holy Clears. I really appreciate your channel, I’m new to the keyboard customization scene so I enjoy watching your videos while I’m at work for both relaxation and education.
didn't know balancing stab wires is a thing until this video.. question, which point did you make the pressure to balance it?
just by twisting wire legs little by little
@@3ildcat nice!
This has made me so excited to get a Kemove keyboard! Gonna start investing in some of these tools also. Where'd you get the key cap holder? That looks soo helpful for lubricating the switch units.
키보드 윤활하시는거 볼때마다 sk61이 진짜 극적으로 변했다는 생각이 드네요.
그나저나 게잉흑 체결하려고 kbd67 샀는데 얼른 왔음 좋겠네요.
와일드캣님은 추후에 더 들이고 싶은 키보드 없으신가요?
Jergo 하나 들이고 싶었는데 디스코드에 샘플 보니 좀 맘에 안들게 나와서 고민중입니다. ㅎㅎ
:3ildcat 되게 특이한 키보드네요. 뭐든 이쁜 거 사셔서 또 좋은 영상 올려주심 감사합니다~
What is the side mounted cup/bin you use?
Hey wildcat! What are your thoughts on orings?
I tried in the past, never use again.
타이핑 소리 넘나 좋은것 ..
Excellent video, thank you!
Is mixing the lube better than just using 205g0?
not better or worse
just 'different'
흡음재까지 추가 했을 때 소리가 기대되네요!
아마 살짝 울리는 소리가 없어져서 더 깔끔할 것 같습니다. 흡음재 없는 개조를 원하시는 분들이 계셔서 빼고 그대로 마무리해봤답니다. ㅎㅎ
:3ildcat 취향차이가 있는거였네요! 오늘도 영상 잘 봤습니다 ㅎㅎ
Awesome! But you think adding foam will make it better?
I think so! at least for me
지금 앤프로2를 사용 중인데 kemove61로 넘어갈까 생각 중입니다. 블루투스 5, 더 큰 배터리, 그리고 hot swappable이 맘에 들고 무엇보다 약 20불정도 저렴하네요.
앤프로2를 환불할 수 있어서 넘어가려고 하는데 와캣님의 생각은 어떠신지요?
간헐적으로 앤프로2가 끊기는것도 약간 거슬리네요.
영상 항상 잘 보고 있습니다 :)
블투가 끊긴다면 환경적인 이유로 다른 블투도 끊길 수도 있어서 그부분은 넘어가고,
큰 배터리나 디자인, 핫스왑이 더 맘에 드신다면 괜찮을 것 같습니다.
개인적으로 앤프로1&2 외에는 무선 키보드들 다 별로 안좋아하는데 키무브 만큼은 포장부터 제품퀄까지 생각보다 괜찮았습니다.
무선기능은 앤프로나 키무브나 영상용으로 외에는 잘 안쓰는 기능이라 따로 말씀드릴게 없네요..
As always, good job!
Did the sound changes mainly because of lubing? Love the sound after modding
Yes
greatvid!
few questions here ?
- is the keyboard too pretty high or is it ergonomic enough to require wrist rest ?
- is the layout completely standard ?
Thanks!
1. I think no rest needs but up to you.
2. Yes
:3ildcat thanks a lot! Gonna order one tomorrow
im so thankful ur useing red instead of scratch or clicky shit thank u
But..finally how many keyboard do you have..