You should have some large mesh over the fan inlet in case any plastic or large wood goes up and into the fan it doesn't just explode 😅 And make a box around the motor/fan with some insulation to reduce noise some more even tho it is pretty quiet it's always nice to get a little more silent 😁 And have a grounding wire to the cyclone and air pipes with a few screws through it to the inside to prevent static
I think you will be very happy with your design.. I am impressed with it's performance. You saved yourself a small fortune, and have something that works perfectly. And, you can always find someone who will purchase it, if you ever need to upgrade to a larger unit in the future. I would,,, just because it is "Shop Made", and looks like it was made by someone with a purpose.. Ha..Ha.. Nice Job.. Looking forward to more of your videos.. They are excellent.
Excelente proyecto muy bien desarrollado y mejor ejecutado , poco a poco esta cogiendo cuerpo , no es muy vistoso , pero funciona muy bien , gracias por compartir tanta información y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🛠️🔝
Jhon, please make sure to run a ground on your system so you don’t create a bomb. Wood dust and pvc will create a lot of static, aka “Fire hazard”. You have to collect be able to dump that charge by poking a few holes to collect that charge and disperse it safely. Besides that man, you did an amazing job, and I’m very impressed! Happy wood working! 👊🤙
hi jhon, i've just watched your dust collection videos and i am very impressed, i'm a stone sculptor and need a simple one inlet dust extraction system. do you think your design would be suitable for my purpose?
I think if you had blast gates on all of the y pieces just at each branch would help keep the velocity up. There's a great website by Bill Pentz about dust collectors and design
Congratulations. Good outcome. I hope it helped keep the dust in the shop to a mimimum. Question: Are you adding an earth wire to the plastic ducting to stop static electricity build up?
Great result Jhon, glad to hear the suction power is still food at the very end of the duct hose. Pretty impressive achievement with a DIY system powered by a 1HP motor. I’d be interested to know the difference if you use a 3HP motor, should you find one to test 😉
yes i want to try it too with 3 HP Make the Impeler slightly big. Maybe 35 cm in diameters and 10cm width blade That would be interesting. Result. But sadly 3HP kind of expensive for me right now
I'm starting my own small wood workshop and your videos are a nice inspiration. Thanks for all your efforts! Ps: The audio levels when you do voiceover (I imagine it is recorded during editing) make it very hard to hear you, try to lower the volume of the background video when doing voiceover. Best regards from Brazil! 🇧🇷
great john so it is regular sweage water pipes? do the joint have rubber gasket? technical comment for improvement: once dust collector is running we couldnot hear you well, better have that issue future solved. great video as always. thank you and best luck
That's a damn effective dust collector! With that speed at the far end with a 3 inch tubing you are getting around 950 CFM there. It's far more than most 1 HP commercial dust collectors!
@ sip om. Saya punya Exhaust Fan Panasonic 16" Inch 40AFU yang model besi Spek baling2 40cm/16inch 78 watt Hembusan UdaraKeluar : 33.5 m³/mnt (CMM) ~ 1183.04 ft³/mnt (CFM) Klo diambil mesinnya dan baling2 nya trus dibuat rumah keongnya Kira2 bisa gak ya om dijadikan dust collector untuk table saw juga Tolong sarannya om...
You should have some large mesh over the fan inlet in case any plastic or large wood goes up and into the fan it doesn't just explode 😅
And make a box around the motor/fan with some insulation to reduce noise some more even tho it is pretty quiet it's always nice to get a little more silent 😁
And have a grounding wire to the cyclone and air pipes with a few screws through it to the inside to prevent static
Good enough and then some! Great build. If you hear cat meows from the blue barrel you know what happened. :D
Yeah! At last :) Thank you very much. Congratulation for your build. It's working perfectly!
I think you will be very happy with your design.. I am impressed with it's performance. You saved yourself a small fortune, and have something that works perfectly. And, you can always find someone who will purchase it, if you ever need to upgrade to a larger unit in the future. I would,,, just because it is "Shop Made", and looks like it was made by someone with a purpose.. Ha..Ha.. Nice Job.. Looking forward to more of your videos.. They are excellent.
Excelente proyecto muy bien desarrollado y mejor ejecutado , poco a poco esta cogiendo cuerpo , no es muy vistoso , pero funciona muy bien , gracias por compartir tanta información y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🛠️🔝
Jhon, please make sure to run a ground on your system so you don’t create a bomb. Wood dust and pvc will create a lot of static, aka “Fire hazard”. You have to collect be able to dump that charge by poking a few holes to collect that charge and disperse it safely. Besides that man, you did an amazing job, and I’m very impressed! Happy wood working! 👊🤙
Thank you Mike for remind me of that, I will do as you suggested on my system
You did a great job
I want to make one like your but mount it outside in its own area
I have a small shop
hi jhon, i've just watched your dust collection videos and i am very impressed, i'm a stone sculptor and need a simple one inlet dust extraction system. do you think your design would be suitable for my purpose?
Well done mate. All you need now is blast gates on your outlet. I'm very impressed.
What are blast gates
I think if you had blast gates on all of the y pieces just at each branch would help keep the velocity up. There's a great website by Bill Pentz about dust collectors and design
Excellent work!
Congratulations. Good outcome. I hope it helped keep the dust in the shop to a mimimum. Question: Are you adding an earth wire to the plastic ducting to stop static electricity build up?
I add earth wire only on cyclone body
Project luar biasa dan sempurna...
Mantap om👍👍👍
makasih mas tris
great. any plans?
Great result Jhon, glad to hear the suction power is still food at the very end of the duct hose. Pretty impressive achievement with a DIY system powered by a 1HP motor.
I’d be interested to know the difference if you use a 3HP motor, should you find one to test 😉
yes i want to try it too with 3 HP Make the Impeler slightly big. Maybe 35 cm in diameters and 10cm width blade That would be interesting. Result. But sadly 3HP kind of expensive for me right now
tambahin remote rellay buat on off biar makin yahud
Next project nanti om
Good job master,,,joz 👍
I'm starting my own small wood workshop and your videos are a nice inspiration. Thanks for all your efforts!
Ps: The audio levels when you do voiceover (I imagine it is recorded during editing) make it very hard to hear you, try to lower the volume of the background video when doing voiceover.
Best regards from Brazil! 🇧🇷
Thank you, my mic need to replace new one, maybe next month will bought a new one
Keren bang mengispirasi
great john
so it is regular sweage water pipes? do the joint have rubber gasket?
technical comment for improvement: once dust collector is running we couldnot hear you well, better have that issue future solved.
great video as always. thank you and best luck
Yes it's a regular water pipes, and sorry for the voice, will fix that next time
That's a damn effective dust collector! With that speed at the far end with a 3 inch tubing you are getting around 950 CFM there. It's far more than most 1 HP commercial dust collectors!
Thank you sir
Supr
good jobs master
makasih mas
Думаю стоит установить частотный преобразователь для повышения мощности двигателя.
Hallo Bang Jhon, salam sukses 😀👍
Makasih bang
Untuk finalnya divideo ini pake impeller yang berapa fins mas, 8 atau 12 fins?
Saya pake 12fins om
@ sip om. Saya punya Exhaust Fan Panasonic 16" Inch 40AFU yang model besi
Spek baling2 40cm/16inch 78 watt
Hembusan UdaraKeluar : 33.5 m³/mnt (CMM) ~ 1183.04 ft³/mnt (CFM)
Klo diambil mesinnya dan baling2 nya trus dibuat rumah keongnya Kira2 bisa gak ya om dijadikan dust collector untuk table saw juga
Tolong sarannya om...
Bang.. Selang 3in itu beli dmn?
Beli di onlineshop om
Pak, kalo pake blower keong bisa ngak ya? Daripada bikin blade? Maap gw kagak jago potong tepat
Bisa om cuman kekuatan hisapnya saya rasa akan kurang maksimal nantinya
Hey Jhon, that,s works very good 👍 take care that maybe your wife need the same in the house, ( joke) . But honest, well done🌷🌷
😁thank you Jan,always nice to have you here
Kui coro jowone opo
Wis gak enek coro ne mas, wingi wis tak basmi😅
Dinamo.brapa HP brpaa RPM om?
1hp mas rpm 2800
That thing really sucks!