DIY DUST COLLECTOR IMPELLER

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 439

  • @andrzej3511
    @andrzej3511 2 роки тому +72

    By using simple tools and cheap materials you have obtained great results! Many factory-produced fans are worse. I didn't notice the vibration so the balancing method used worked well. You have found a very good method of matching the engine load to its rated parameters.
    Great job, you will paint it elegantly and everyone will be convinced that it is a factory product. :)))

  • @anthonym.pacelli1960
    @anthonym.pacelli1960 7 місяців тому +6

    No long preamble, no annoying music or endless monologuing and I thank you !!

  • @ignaciomeroni7815
    @ignaciomeroni7815 8 місяців тому +6

    Such a practical person, no bullshit or over complicated processes or tools.
    Robust and working results.
    Watching someone like you that knows what is doing makes it so that even a baby watching understands how impellers work and are made.

  • @blakes8901
    @blakes8901 8 місяців тому +22

    Do you know your video is genuinely one of only a few sources on the internet where one can actually learn how to build and design a dust collector impeller and its related housing assembly in detail? You did such a great job making it easy to understand, replicate, and even modify. I really appreciate the work you put into this. Thank you. You saved me a lot of time and effort; reading and studying scientific research papers about the "optimal" way to design an impeller assembly where all of the relevant info is either missing because they assume you already have a mechanical engineering degree and it would be too basic to include, or is "encrypted" in unnecessarily complex language/jargon that takes forever for a layman to decipher and subsequently understand, let alone put into practice. You have my heartfelt gratitude; truly, I thank you. I will save so much money replicating this, and have internalized concepts you have shown here that I may later extrapolate from to bring my own original ideas to fruition, beyond "just" an impeller assembly. All due to your selfless sharing of knowledge in a way that is easily digestible to the layman.

    • @tullgutten
      @tullgutten 3 місяці тому +1

      If you like this type then check put mathias wandel and marius hornberg also (probably spelled wrong but it's close enough).
      Good videos are far from eachother and this one seems to be one of the good ones 😄

    • @blakes8901
      @blakes8901 3 місяці тому

      oh yeah dude I'm subbed to both those guys. great minds those two.

  • @kevinnobody3052
    @kevinnobody3052 2 роки тому +19

    As soon as I saw you using proper geometry technique to layout your impeller blades.........
    I subscribed to your channel.
    Then when I saw how your table saw top actually moves like a sled........
    I was blown away.
    Your designs are very unique.
    Thank you for sharing your knowledge.
    Very nice and much respect.

  • @cyrilnorrie8450
    @cyrilnorrie8450 9 місяців тому +1

    I’m amazed by your ingenuity! This blower works so well. I noticed other equipment that you have built and I’m so impressed! You are a master!

  • @C-M-E
    @C-M-E 2 місяці тому

    That's a very credible result, and a project I'd be over the moon for. What I found even more interesting were your solutions to some mainline tools I've not seen elsewhere. The sliding mechanisms are a stroke of inspired genius!

  • @JonehJozieTM
    @JonehJozieTM 2 роки тому

    Mantap sekali. Saya sendiri perlukan benda ni. Thanks for sharing.
    Looking forward for the next video.
    #staysafe #stayhealthy

  • @eikodunn
    @eikodunn 7 місяців тому

    Ingenious. This is what I need for a < 1” decorative landscape aggregate vacuum. To lift aggregate into a hopper to separate >1”, 1/4” and sand. 👍🏾👍🏾👍🏾👍🏾👍🏾

  • @sdunca4864
    @sdunca4864 2 роки тому +11

    Great video- BRAVO mate- You need to get Mathias the Canadian Wood engineer to collaborate! Awesome content-

  • @Wtfever..................
    @Wtfever.................. 2 роки тому +3

    That's their aren't very many people that have the balls to build something like that great job!💪

  • @robertrohler3644
    @robertrohler3644 7 місяців тому

    Well done, I like your logical and analytical approach to design and construction. Wow what a dust collector. At first I thought the 1Hp motor was over sized but I liked the outcome. When I saw you measure the FLA of the motor under load I liked the methodology of your design. Very impressive on the air flow, both of them. Thank you good video

  • @kempaswe4022
    @kempaswe4022 2 роки тому

    Good work. Loves to build things myself too. I am a constructor, car electrician, car reconditioner, mechanic. Right now since 7years back Im working as a workshop manager in a door factory. Im the one fixing all the machines etc in the production and the paintshop.

  • @mypd1422
    @mypd1422 2 місяці тому

    saya melalang buana di dunia luar, namun banyak sekali orang indo kreatif yang bermunculan. mantap bang.

  • @rahmatsyaifulazis
    @rahmatsyaifulazis Рік тому

    Luarrr biasa, ada plastik Indomaret juga pak, saya sebagai karyawan swasta sangat terbantu sekali dengan video bapak, semoga bisa menjadi inspirasi kaizen ditempat kerja saya pak.

  • @BangManss
    @BangManss 7 місяців тому +2

    Gede bangat tenaganya ya pak😁, pake b Inggris jadi banyak yang nonton dari luar negeri ya

  • @carbonbased5041
    @carbonbased5041 2 місяці тому

    Perfect construction, and very clean, descriptive storyboard too. Thank you.

  • @leandersmith6184
    @leandersmith6184 2 роки тому +7

    Wow this is the real deal, I'm working on a system but never got the satisfaction. Taking my old vacuum cleaner apart i noticed the housing was curved like a rolled up hose. This would help the airflow also tapering the ends of the propeller would help. The same for inlet and outlet, but man you hit the nail without a hammer great thinking and execution. You got yourself a new subscriber. Thanks for sharing from Mexico.

  • @sgntbilco
    @sgntbilco 2 роки тому +9

    Totally captivated by your ingenuity and precision. Awesome job!!! 👍🙂👍

  • @hithere2561
    @hithere2561 2 роки тому +4

    Its so good to see someone who really knows how to use simple tools. Great work!!
    Thank you for sharing

  • @straightstreet7143
    @straightstreet7143 8 місяців тому

    Even video has 2years ago, this is still great video, awesome job, what yo doing make me open my mind, much respect from me.

  • @YourRelaxMind
    @YourRelaxMind 9 місяців тому

    This simple tools made less noise than vaccum. Thanks Jhon.

  • @byugrad1024
    @byugrad1024 9 місяців тому +1

    You should do a follow up video showing static pressure measurements as well. Looks like that would be rather significant seeing as how you paid significant attention to the impeller inlet and attempted to close the gap between the impeller and inlet as much as possible.

  • @AndrewFroude
    @AndrewFroude 10 місяців тому

    Awesome. Thank you. I have a 2hp Extractor but feel the airflow is poor and have been considering an upgrade, and this impeller may be what I look to add. Awesome.

  • @markhedquist9597
    @markhedquist9597 2 роки тому +4

    You've created a monster!
    Haha! Nice work, man. I'm glad you did two versions of the impeller for comparison. I learned a lot from this. Thanks!

  • @paulweston8184
    @paulweston8184 2 роки тому +1

    I subscribed after this first video. He had me cracking up with his measured marks vs pencil lines. You got it close enough. Also, legend has it, that the arms on your circle-making compass are 8 8 meters long. Wow!

  • @anthonym1998
    @anthonym1998 7 місяців тому

    love your style - your presentation and the shop-made tools.

  • @SAEpotostudio
    @SAEpotostudio 2 роки тому +1

    Ini video pertama kali saya nonton chanel Mas. Kesan pertama aku kira orang Philippines atau melayu yg lagi ada di luar negeri.
    Jadi ragu mau koment takut blewer English ku... 😁
    Tapi pas kulihat kreseknya, aku jadi yakin...
    Gak akan susah buat ngomentarin videonya. 😁😁
    Mantaap mas.. Lanjutkan. 👍👍👍

  • @osvaldoanibaljuanin7986
    @osvaldoanibaljuanin7986 2 роки тому

    Buenísimo!! Muchísimas gracias por compartir!! Nose Ingles, pero voy a tratar de traducir!! Gracias desde Argentina!!!

  • @viorsa8200
    @viorsa8200 2 роки тому +3

    Excelente proyecto muy bien desarrollado y mejor ejecutado , una buena herramienta para el taller , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 🛠️ 🔝

  • @dndworkshop
    @dndworkshop 2 роки тому +1

    Mantab om.... iconik banget kresek indomaretnya hehehhe....

    • @jhonarief
      @jhonarief  2 роки тому

      wkwkwk.... mengangkat kresek lokal mas ini ceritanya

  • @Blackbird58
    @Blackbird58 Рік тому +1

    Excellent video, I am going to make mine following your design!
    Thank you very much for your effort and expertise.

  • @JenniferPChung
    @JenniferPChung 8 місяців тому

    lol when the bag threw away. This is awesome. The results are amazing👌

  • @rahmatfadli3711
    @rahmatfadli3711 2 роки тому

    Bagus sekali, sepertinya saya akan membuatnya untuk workshop saya.

    • @jhonarief
      @jhonarief  2 роки тому

      Mantaapp om, semangat ya , klo ada yg mau ditanyakan seputaran prosesnya nanti silahkan langsung saja dm di instagram saya @jhonariefdiy

  • @maddychloe1
    @maddychloe1 Рік тому

    Super ingenious and quality craftsmanship.Thanks for sharing

  • @buckboy1234
    @buckboy1234 2 роки тому

    This guy is on another level...and yes I noticed he actually built the bandsaw....amazing work

  • @GKganesan
    @GKganesan 10 місяців тому

    Dear John: I am delighted with the videos in your channel. May God bless you and your loved ones with great success, prosperity, health, fame and spirituality. Happy New Year!

  • @HasilKayu
    @HasilKayu 2 роки тому

    ini ide yang sangat luar biasa membuat blower penyedot dari bahan multiplek bagus

  • @miyamka
    @miyamka 2 роки тому

    Semangat terus pak membuat inovasi2 baru🔥🔥🔥🔥

  • @jasoncrozier4766
    @jasoncrozier4766 2 роки тому +1

    You are 100% genius. Never ceases to amaze me the things you can do
    Keep it up , very well done Jhon

  • @EduardoRobertoSales
    @EduardoRobertoSales 2 роки тому +3

    Incredible design, very well thought out. Cheers from Brazil!

  • @pebriantosarita5978
    @pebriantosarita5978 2 роки тому

    Keren banget pak. Tks untuk contentnya pak

  • @kosycat1
    @kosycat1 2 роки тому

    With in like 10 seconds of watching you viedo and hering you talk about your project i could tell that you do some cool stuff and quality work. subscribed!

  • @marcus_w0
    @marcus_w0 2 роки тому

    The drumsander jig alone was worth the video. Thumbs up.

  • @pabloparamo8145
    @pabloparamo8145 Рік тому +1

    Very good video congratulations. Excuseme, the fins can be flat? Why they have to be curved, curved Is beter than the flats fins? Thank you

  • @NathanNostaw
    @NathanNostaw 2 роки тому +11

    Must feel good getting those results after all the design and building work. I like to quick release part of the design. Great idea for testing and evolution of the design.

  • @colinstreicher7208
    @colinstreicher7208 2 роки тому

    I am blown away by the tools in his shop. I want to know how to build all of them.
    The fan is pretty cool too.

  • @andikworks
    @andikworks Рік тому

    ini sih keren parah om Jhon, kayaknya saya butuh bikin gini juga buat di workshop
    thanks udah sharing om
    auto subscribe

  • @superpuppy7854
    @superpuppy7854 2 роки тому

    This is a very nice design. Now I know what to do with that motor I have sitting around!
    Best wishes from Uganda.

  • @solopermatachanel
    @solopermatachanel Рік тому

    Keren Pak Arif, bisa buat inspirasi

  • @wafflebeaver
    @wafflebeaver 2 роки тому

    Damn! That's really good suction for just a 1hp motor

  • @watahyahknow
    @watahyahknow 2 роки тому

    smart idea to line the halves up

  • @user-schmonder61
    @user-schmonder61 2 роки тому +2

    Красивая и грамотная работа👍

  • @Dr._Spamy
    @Dr._Spamy 2 роки тому +4

    I thought this was the end of my PC Speakers. 12:30 😅

    • @jhonarief
      @jhonarief  2 роки тому +1

      Sorry qbout that sir, I forgot to turn off my workshop fan

    • @Dr._Spamy
      @Dr._Spamy 2 роки тому

      @@jhonarief Oh, no problem sir. It's not that it was too loud for my speakers, but that a dieing audio amplifier often makes similar noises. But my speakers are still fine. ;)

  • @Sundardevsaha-e3k
    @Sundardevsaha-e3k 11 місяців тому

    Wow!! That was so impressive! Thank you for the video! It was inspiring!

  • @nic6754
    @nic6754 2 роки тому

    wow very well done sir! you made that look easy! I'd like to see a diyer try that, it would be like a bad 80s comedy movie.

  • @tucatucz
    @tucatucz Рік тому

    That's absolutely insane.

  • @keenanmcbreen7073
    @keenanmcbreen7073 2 роки тому

    impressive engineering with normal building materials!

  • @janfideplat752
    @janfideplat752 2 роки тому

    Super travail mon ami, merci pour ce partage 😊👍autant pour le savoir-faire professionnel du bois que pour votre art de communiquer votre talent inspirant !

  • @Negaradotcom
    @Negaradotcom 2 роки тому

    John, That is awesome 👏
    I like those who make their equipment by themselves, I do that also

  • @luckyluck8876
    @luckyluck8876 2 роки тому +1

    Busur derajat tjap butterfly...😁👍👍

  • @shankarh6915
    @shankarh6915 Рік тому +1

    Incredible and inspiring! Awesome work!

  • @Linrox
    @Linrox 2 роки тому +1

    Really nice job. Well done. I am making one as well. hope it is as good. Looking forward to part 2.

  • @paulclark5437
    @paulclark5437 2 роки тому +3

    Love the video! You are a talented craftsman. You measured the inlet/outlet velocity differences. I was hoping to see static inlet/out pressures measured and compared. This could be performed cheaply by measuring the height of water that can be pulled/pushed up a tube, against gravity.

  • @J-D248
    @J-D248 7 місяців тому

    Impressive shop! You are very handy! Wish I was that determined :)

  • @gwater12345
    @gwater12345 3 місяці тому

    safety is priceless.
    Buy the retail one.

  • @franciscomenezes8901
    @franciscomenezes8901 Рік тому

    EXCELENTE TRABALHO E ENGENHOSIDADE, PARABENS !!!

  • @pabloparamo8145
    @pabloparamo8145 Рік тому +1

    Excelent, congratulations.

  • @antrip354
    @antrip354 7 місяців тому

    Masya Alloh tabarokalloh....Top morkotop mase

  • @romanyrose4074
    @romanyrose4074 9 місяців тому

    Stellar design and geometry skills.

  • @putrabungssu
    @putrabungssu Рік тому

    Kren om. Thanks you. . menambah ilmu. 👍🙏🙏🙏

  • @bejo.banget
    @bejo.banget Рік тому

    wah speak-speaknya boleh banget nih, salut

  • @boxoftj1
    @boxoftj1 2 роки тому +1

    Oh my God, I've been wanting a video like this for so long. Perfect. Thank you

  • @endurovoice55
    @endurovoice55 Рік тому

    Sangat menginspirasi.... Keren mas 👍👍

  • @hanaanrosenthal
    @hanaanrosenthal 2 роки тому

    What a great project. Your ingenuity is remarkable!

  • @ing.ricardocastruita4215
    @ing.ricardocastruita4215 2 роки тому

    You make it see easy !!
    Thanks for share your knowledge

  • @MrJdspecial1
    @MrJdspecial1 2 роки тому

    You were checking for runout after glueing the impeller. Fyi. Awesome vid!

    • @jhonarief
      @jhonarief  2 роки тому +1

      Yes , I was scrub it with thin piece of scrap wood

    • @MrJdspecial1
      @MrJdspecial1 2 роки тому

      @@jhonarief bro, amazing work. Truly inspiring!

    • @jhonarief
      @jhonarief  2 роки тому

      Thank you

  • @syrzyy
    @syrzyy Рік тому

    Teramat mantap tuan.

  • @mihariyahoo
    @mihariyahoo 8 місяців тому

    Thank you for your in-depth video! What an amazing contribution to the community!
    I am about to start building a system based on your "design". I have a motor at the same RPM, only a bit less power (0.6kW). I will start my fan at your final dimensions, and downsize if i see it necessary. The blades, I will make out of plywood (or PVC, I haven't decided yet). I will also add a filter on mine, which will probably slow down the air and draw more power to the motor.
    After having used your dust collector for quite some time now, is there anything that you would change/do differently?

  • @RK88_Channel
    @RK88_Channel Рік тому

    kerenn pak.,., ijin saya ambil ilmunyaa.,,. terima kasih

  • @petem6503
    @petem6503 2 роки тому +2

    "Material handling" fans (those processing air with large and abrasive particulates) are designed with flat/straight blades to reduce erosion of the blade surface. Curved blades are more efficient, but increase surface erosion. If the system design has the filters upstream of the fan, that should be sufficient to protect the blades.

    • @jhonarief
      @jhonarief  2 роки тому +4

      agree with you 100%, that's why my diy cyclone design to be big and the intake pipe inside the cyclone are long enough to reduce the materials getting sucks to the impeller, btw that is nice tips from you, thank you

  • @CsokisMorisz
    @CsokisMorisz 2 роки тому +2

    Superb video! It helps a lot! Thank you for the upload!

  • @robertdelaney5994
    @robertdelaney5994 9 місяців тому

    very good work . thankyou for sharing this.

  • @woodmoodid
    @woodmoodid 2 роки тому

    Matthias wandel from Indonesia,sukses terus om 😊

  • @mentoringcb
    @mentoringcb 2 роки тому

    Dari logatnya tadi sudah curiga ini orang Indonesia. Begitu ada kresek Indomaret langsung yakin 😂😂 Mantap bro

  • @madsillywilly4408
    @madsillywilly4408 7 місяців тому

    Great video! You got a new subscriber :) Also I think that making the intake hole smaller will help reduce the energy consumption.

  • @adamkonowol3543
    @adamkonowol3543 2 роки тому

    Very usefull, I'm considering making my own. Thanks.

  • @Bartolobot
    @Bartolobot 2 роки тому +1

    hay Jhon, be careful you don't start a fire with that thing.

  • @ЕрланРаимбеков-у4ч

    golden brain, golden hands 👍hello from Kazakhstan I subscribed to your channel

  • @JRAUDIO
    @JRAUDIO 2 роки тому +1

    Teknologi creatif untuk memilah biji padi kalau saya dulu hanya pakai kipas angin sekarang ada yang lebih kenceng nich namun dengan harga yang sangat terjangkau

  • @fauzihendrasakti2487
    @fauzihendrasakti2487 2 роки тому

    Mantap orang Indonesia juos mas jon

  • @kinganthonyx
    @kinganthonyx Рік тому

    Very useful and good explanation

  • @ahmadkurniawan4799
    @ahmadkurniawan4799 2 роки тому +1

    Terbaik....sukses truss kang🙏

  • @dirkroggeveen5764
    @dirkroggeveen5764 2 роки тому

    Thanks for sharing this Jhon, the results are great!! Keep on doing the good work!

  • @MarketsReframed
    @MarketsReframed 2 роки тому

    You are awesome dude. Love all the homemade tools and this project.Please keep making videos.

  • @arkanachanel330
    @arkanachanel330 2 роки тому

    Creo que este hombre es ingeniero. Bravo

  • @ashshahibproject971
    @ashshahibproject971 2 роки тому +1

    Joss mantaap lanjutkan kreasinya

  • @Suicaedere666
    @Suicaedere666 2 роки тому +1

    Man I love you.. this was incredible.. thank you very much for sharing g

  • @adamulias2315
    @adamulias2315 2 роки тому

    When I saw that DIY track cc saw set up… my jaw dropped!!! STELLAR WORK John!!
    I’ll be subscribing for sure. 😃👍

  • @RicardoCostaBebedouroemFoco
    @RicardoCostaBebedouroemFoco 2 роки тому

    O melhor projeto que encontrei, vou tentar fazer o mais próximo possível deste modelo.