Running a Moroso can. I'll probably switch to something less restrictive like the IAG. All of the catch cans pretty much rely on stainless steel wool to act as a filter medium.
Thanks. Custom dyno tune. Have a premier Subaru shop in my area. The tuner unlocks the ethanol sensor, otherwise it just displays zero. You'll need a compatible ethanol tune as well.
hey man, i got mine in the mail and installed it. But i cant get it to read the ethanol content. The sensor was fine before and its a cobb sensor. Is it labeled under a different name than Ethanol conc final?
No, I left the OEM pump. My Subaru specialist said that e60 is fine on the OEM pump. Cobb does not sell the AEM pump in their flex package either (but they do with the EJ's). Only time will tell, but seems like it should be fine.
Hey man question I’m installing mine and is the fuel pressure sensor(the black Cobb thing that attached to the fuel line ) supposed to be lose and easy to pull off ?
What other mods are you running?
@@stevep4236 She's stock except for a cat-back, flex fuel and EBCS.
Where did you get the sleeving
25ft - 1/2 inch PET Expandable Braided Sleeving - Black - Alex Tech Braided Cable Sleeve a.co/d/etw3Zpu
Tesa's Most Advanced High Heat Harness Tape 51036 Mercedes, BMW, Audi, VW a.co/d/gOfOUsn
Do you happen to know how much HP and TQ is made by doing this?
@@Mauiiwaui Dyno sheet said 330 hp / 350 tq. I think that is overstated by a decent amount though.
What catch can are you running if you don't mind me asking? Very nice install by the way, very clean.
Running a Moroso can. I'll probably switch to something less restrictive like the IAG. All of the catch cans pretty much rely on stainless steel wool to act as a filter medium.
Nice work brah👍🏽 did you have to get it tuned or do you set it up yourself on your access port ?
Thanks. Custom dyno tune. Have a premier Subaru shop in my area. The tuner unlocks the ethanol sensor, otherwise it just displays zero. You'll need a compatible ethanol tune as well.
hey man, i got mine in the mail and installed it. But i cant get it to read the ethanol content. The sensor was fine before and its a cobb sensor. Is it labeled under a different name than Ethanol conc final?
That's the one! It won't get activated until your tuner enables it.
@@OutFr0mUndr OOF, i thought mine was broken. Cause i cant see the FP Diff either. And i bought that sensor as well. But thank you
Using their provided OTS map as well? Any other bolt ons?
I used my stage 1 tune until I could get to my tuner. Gained about 40hp/40tq over the stage 1 tune. No mods except for flex and EBCS.
Great video, do you need an upgraded fuel pump for this?
No, I left the OEM pump. My Subaru specialist said that e60 is fine on the OEM pump. Cobb does not sell the AEM pump in their flex package either (but they do with the EJ's). Only time will tell, but seems like it should be fine.
Good job
Did you use the tessa tape just to wire the ends of the sleeving and in between ?
The ends of the sleeving so it wouldn't fray. Couple other spots where I didn't want zip ties as well.
@@OutFr0mUndr thank you
Hey man question I’m installing mine and is the fuel pressure sensor(the black Cobb thing that attached to the fuel line ) supposed to be lose and easy to pull off ?
Mine snapped on. It shouldn't pull off.