Watch Next 😎👇 ❓ How to Use Embroidery Applique Designs in Silhouette Studio ua-cam.com/video/UA9rjUSFPAw/v-deo.html ✨ Introduction to Stippling with Silhouette Cameo ua-cam.com/video/4Y13uBlzhII/v-deo.html 🥰 How to Create a No Sew Applique Design in Silhouette Studio ua-cam.com/video/q6EG1Z1hA10/v-deo.html
Thank you Becky, I've tried to do this in the past and never understood why changing the line thickness didn't alter the cut. I really enjoy your videos. You are a great teacher.
WHERE were you two years ago when I was designing a sewing shirt and wanted stitched letters to go with the old fashioned sewing machine that I was using with HTV! I did find a stitched alphabet but had to add some stitches to make it look right. I was very new then and took some doing to get the extra stitches in. I feel like an idiot, I've seen the dotted lines in the Line Style menu, but it never occurred to me to use them to add stitches to any alphabet... 😆I think that my design would work nice with sublimation too. Oh, I wanted to tell you what I decided about weeding the stitched letters? Reverse weed as in peel the letter off and either tape it down with blue heat tape OR peel the letter off, get rid of the stitches and put the letter BACK on the carrier sheet! Once I figured that out, made life easier! VERY informative video!
Becky!!! You are amazing! I’ve literally been looking for a “stitched font” all evening then came here to watch another one of your tutorials for something I needed a refresher on. Thank you for being such a great teacher!
Thanks for another information packed video Becky!! When you pointed out that tracing the “stitches” so they are cut rather than just perforated was an a-ha moment for me!! 😄
Design in silhouette & cut in CRICUT...just have to keep track of how many projects I do monthly🙄 This might require multiple watches😇 THANK YOU BECKY!
Hi Becky! Great tutorial. I want to draw faux stitching on cardstock. I did buy those ready-made designs on your website. I love how you used fill patterns to print the designs. Where can I purchase those fill patterns? TIA, Sheryl
Hey Sheryl, I grabbed this fill pattern with my Plus Membership at Design Bunndles. I'll link it for you here. Hope this helps! ---Becky designbundles.net/plusstore/1198896-set-of-seamless-patterns-easter-gnome
Thanks for the tutorial. I have done this before, but instead of tracing the stitching, I've just selected edge cut. Is there an advantage in doing the tracing, rather than edge cut?
Hi Sharon! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn
Hi Elaine! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn 🙂
Fun tutorial, however it's hard to keep up with your actions, being a newbie! I wish you could have gone a step beyond and showed how you print and cut it, etc. Thanks for this video though..
I'm so sorry about that! We have videos on Print and Cut with silhouette: ua-cam.com/video/gUcXsRBoiyc/v-deo.html and here are all the rest of our Silhouette tutorials: ua-cam.com/users/DesignBundlessearch?query=Silhouette
I have the c maker with all but 2 tools and 3 older Cricuts, 2 are second hand. I have a black cat cigar Machine. I bout business edition of silhouette studio so I would be able to create some designs. I discovered last night that some of the business options within the software are Not Actual Options if you do not have a silhouette machine to connect to. Just wanted to be able to use All Tools Etc within the business silhouette software to create. On a extremely limited income with little opportunity to buy another machine. Any ideas? BTW enjoy your videos...
Hey Darlene! I'd love to help you with this! Other than a few of the cutting features (cutting with multiple machines, cutting by layer), I can't think of anything that wouldn't be available to you. What features are giving you trouble? ---Becky
@@DesignBundles added: I’m not sure of other options that may not be available. I have to go slow with learning, I retain steps better. So haven’t had the chance to check everything out yet. I’m not at my computer now...
Watch Next 😎👇
❓ How to Use Embroidery Applique Designs in Silhouette Studio
ua-cam.com/video/UA9rjUSFPAw/v-deo.html
✨ Introduction to Stippling with Silhouette Cameo
ua-cam.com/video/4Y13uBlzhII/v-deo.html
🥰 How to Create a No Sew Applique Design in Silhouette Studio
ua-cam.com/video/q6EG1Z1hA10/v-deo.html
You are an easy to understand teacher. Thank you!
You're very welcome! Thanks for watching :)
Thank you Becky, I've tried to do this in the past and never understood why changing the line thickness didn't alter the cut. I really enjoy your videos. You are a great teacher.
Again, another great tutorial to save in my "from Professor Becky" folder! Thank you!!!
You are so welcome! I'm glad you enjoyed the video :)
It made sense!! Thank you For sharing ❤️🇳🇱
You're so welcome! :)
So many great tips Becky! I just wanna hang out with you in your craft room and learn all the things 😆
Awesome!! I would love to see the printed project? Thanks
Wow you yet again amazed me 🤩
Thank you so much 😀
Such a great tutorial. A lot of steps but I'm saving to watch again. Thank you very much. 💐❣💐❣💐❣💐❣
WHERE were you two years ago when I was designing a sewing shirt and wanted stitched letters to go with the old fashioned sewing machine that I was using with HTV! I did find a stitched alphabet but had to add some stitches to make it look right. I was very new then and took some doing to get the extra stitches in.
I feel like an idiot, I've seen the dotted lines in the Line Style menu, but it never occurred to me to use them to add stitches to any alphabet... 😆I think that my design would work nice with sublimation too.
Oh, I wanted to tell you what I decided about weeding the stitched letters? Reverse weed as in peel the letter off and either tape it down with blue heat tape OR peel the letter off, get rid of the stitches and put the letter BACK on the carrier sheet! Once I figured that out, made life easier! VERY informative video!
I truly love your tutorials, so clear and easy to understand. Thank you. And how cute is this faux stitching?
Thank you! 😊
Becky!!! You are amazing! I’ve literally been looking for a “stitched font” all evening then came here to watch another one of your tutorials for something I needed a refresher on. Thank you for being such a great teacher!
Thanks for another information packed video Becky!! When you pointed out that tracing the “stitches” so they are cut rather than just perforated was an a-ha moment for me!! 😄
Thank you for this tutorial, so looking forward to the next faux stitching tute , You are the best !
You are so welcome! I'm glad you enjoyed the video :)
Hi Becky, That was great, learnt something new, TFS, Cheers Anna.
I'm so glad it was helpful!
Thanks Becky. Based on the direction Cricut is going I better start learning Silhouette Studio
This is awesome. Thank you for sharing
That is so cute!!
Thank you for this, Becky! I alway learn from you. Can you do some videos with your glowforge?
What fun!
❤️
Thanks for watching!
Design in silhouette & cut in CRICUT...just have to keep track of how many projects I do monthly🙄
This might require multiple watches😇 THANK YOU BECKY!
I like to draw the faux stitching. No idea how you do that in silhouette studio though 😳
Hi Becky! Great tutorial. I want to draw faux stitching on cardstock. I did buy those ready-made designs on your website. I love how you used fill patterns to print the designs. Where can I purchase those fill patterns? TIA, Sheryl
Hey Sheryl, I grabbed this fill pattern with my Plus Membership at Design Bunndles. I'll link it for you here. Hope this helps! ---Becky
designbundles.net/plusstore/1198896-set-of-seamless-patterns-easter-gnome
Thanks for the tutorial. I have done this before, but instead of tracing the stitching, I've just selected edge cut. Is there an advantage in doing the tracing, rather than edge cut?
Hi Sharon! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn
Like the heart n stich but can you do it as a print if you dont want to cut it of viynl ? Thank you
Hi there! Yes, you could do this as a print and cut and use printable vinyl! - Dawn 🙂
Hi great video but what if you have like a box template n want to do just the box lines to score only how can i do that thank you
Hi Elaine! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn 🙂
Fun tutorial, however it's hard to keep up with your actions, being a newbie! I wish you could have gone a step beyond and showed how you print and cut it, etc. Thanks for this video though..
I'm so sorry about that! We have videos on Print and Cut with silhouette: ua-cam.com/video/gUcXsRBoiyc/v-deo.html and here are all the rest of our Silhouette tutorials: ua-cam.com/users/DesignBundlessearch?query=Silhouette
Could this be used for sublimation ?
Hello Sandra!
It definitely could be used for Sublimation! 😊
I have the c maker with all but 2 tools and 3 older Cricuts, 2 are second hand. I have a black cat cigar Machine. I bout business edition of silhouette studio so I would be able to create some designs. I discovered last night that some of the business options within the software are Not Actual Options if you do not have a silhouette machine to connect to. Just wanted to be able to use All Tools Etc within the business silhouette software to create. On a extremely limited income with little opportunity to buy another machine. Any ideas? BTW enjoy your videos...
Hey Darlene! I'd love to help you with this! Other than a few of the cutting features (cutting with multiple machines, cutting by layer), I can't think of anything that wouldn't be available to you. What features are giving you trouble? ---Becky
@@DesignBundles stippling option is grayed out, says works when machine is connected so something similar. Thank you for responding...
@@DesignBundles added: I’m not sure of other options that may not be available. I have to go slow with learning, I retain steps better. So haven’t had the chance to check everything out yet. I’m not at my computer now...