Sig Sauer p365 X Macro rust issues FIXED!!
Вставка
- Опубліковано 21 лип 2024
- New viewers remember to like and subscribe!
To become a supporter of the channel please assist through patreon at the link below.
patreon.com/gunsfornewbies - Авто та транспорт
You hear all kinds of 'rust issues' in these posts. Some may be legit, others not so much.
Some poeple have really corrosive sweat. If they appendix carry, and sweat a lot, theyll have problens - especially if you're around air conditioning a lot - like in a vehicle with the blower hitting your gun with cold air - it's probably going to cool your gun lower than outside air temp. You get out of your vehicle on a hot humid day and your likely going to get condensation on your gun. You wont know it, because it's in your holster. That condensation will mix with sweat and start eating at the parts of your gun that aren't stainless steel... Like sights, barrels, magazines and some springs which are carbon steel on guns like the X-Macro. You get multilple hot/cold cycles creating condensation on them and mixed with sweat they will eventually rust if not wiped down with protectant. I use G96 Gun Treatment. Spray it on a rag and wipe the gun down every week or so on carry guns. Think about it - appendix carry is a relatively new practice, like in the last 10 to 15 years. Carrying in that positionin all day, every day invites exposure to a lot of condensation and moisture. More so than OWB carry which used to be the norm. A lot of you guys also have the gun and holster up against bare skin, which increases the likelihood of rust. Youre free to buy and carry whatever you want. Just don't be so quick to blame rust on the manufacturer. Ive carried a 365XL and then X-Macro every day for going on 5 yeers. No rust.
I got the p365x macro no comp 3970 rounds through it absolutely flawless people can say whatever they want about whatever I also have the XL with 1930 rounds through it absolutely flawless never know rust issues love the macro though it feels so good in my hand
How much do you actually carry it though. Rust is mostly cause by sweat from carrying.
I carry my gun every time I leave the house during work it is always on me and now I'm up to 4330 rounds of my macro I absolutely love the gun
How long have you got the gun for? Curious
@@samuraiknightz8067 since October of 23
I’ve been carrying p365 x with the suppressor height sights and Holosun 507k everyday for the last two years and not an ounce of rust and I train with it and I rarely clean it.
Best solution for a rusting Sig is buying something else. Thanks for saving me some money.
I picked up my p365 12/2023. I've had about seven range sessions with it, one in the rain. About 1600 rounds. I love the gun but I'm worried about the rust. I'm using Clenzoil as a clp. We'll see how this works out.
I have 4 P365s in varying versions. 2 from 2021 and 1 2023, 1 I just bought. Everyday I carry in either my pocket or IWB. Zero rust. But, I do maintain my firearms. Wipe them after carry, clean them after every shooting session. I use CLP.
Not saying you, but I think some people just don’t maintain their firearms properly. And, some people do have a more acidic body chemistry.
I do the same. I clean my handguns at least 2 to 3 times a week just out of discipline and never run into rust issues. A good CLP wipedown and maintenance a few times a week is essential in keeping a clean, functioning EDC.
Please keep us updated to whether or not you continue having this issue. Also do you CCW this macro?
Never rust to me... 8 month every day... my best carry pistol at today... precision shot and rapid fire... good balance.... best at large pistol....
ALL my Sigs have gotten rust...I still like them but they're maintenance needy, too much for my lazy a$$
I’m no expert, by any stretch … but years ago, you’d use solvent to clean, then oil. Could there be an issue with the clp people use now days? (Cleaner and oil combined?) I bought my first bottle like 9 months ago, and it completely ate away the entire label, so you can’t even read it anymore … 🤷🏻♂️
When they replace parts such as the barrel, do they give you another part and use the same serial number as the rest of the gun or do you end up with mismatched serial numbers?
The fcu is the only serialized part on a p365 so the new barrel and grip module won’t matter as far as matching numbers. Hope that answers your question
Have you noticed any rust forming on the outside of the slide at all?
I thought I had however they cleaned it up and said it wasn’t rust
What Oil were you using?
Hoppes gun oil and I had another name brand back then as well I believe I had hoppes in it.
Nonwater based in any way, and noncorrosive.
Get to the point...Way to much talking
The audio is destroying my ears
Maybe take care of your shit.
Never thought of that before thank you
The sig is expensive shouldn't be rusting. I have a $200 Taurus for 7 years Then I carried everyday in the Florida heat and humidity and it never rusted.. Hopefully sig gets their act together and they might be as good asTAURUS 😂😂😂
Oh wait rhere is a thing called custom finishes which alpt of people do so rust is not the end of the world and everyone is being a bitch about it