I just want to say, your diagram that you drew up @ 20:20 is so damn helpful. I wish there were more visual representations of bends like this one & others, in the material i am shown in school. These videos have been a lot more helpful. You are a gem for the community my man. an electrician's electrician if there ever was one. lol.
Very, very helpful. Thank you for putting in the time to explain this and film it. You got me past my first corner obstruction today. Much appreciated.
Thank you for watching. I have the video on the calculation for the other obstructions like round and square as well. Along with a full library of video's for different bends and tips and tricks as well.
Hey man you are a life saver! I’m no pro but I was making a 100 ft run of 3/4 Emt in my shop and I was really struggling with one corner until I found this video. Thank you!
Yes I have all three types of obstructions for a compound 90 video. Square, round and rectangle. I will send you the link to the Square formula video. Thanks for watching my videos and most of all for commenting. I really appreciate it. Please follow me on: Facebook/holmzlaw Instagram/holmzlaw TikTok/holmzlaw Reddit/holmzlaw LinkedIn/melvinrubio Snapchat/holmzlaw Tradehounds/holmzlaw Discord- discord.gg/cKgE88wW Communities: Reddit/r/conduitology Facebook/artofconduitbending LinkedIn/artofconduitbending
An idea for a video maybe. You’re favorite tools for bending. Like why you use a folding rule. Or your favorite reamer. And maybe another video about some beginner tips for do and don’t with bending conduit like always use a pencil.
At the moment I have too many. When someone stops rescheduling I'll get you in. I only have so many hours in a day. You can start by joining my Discord server here don't forget to go to the main room "conduitology 101" and introduce yourself. discord.gg/MBqDWWzH
Thanks man I've taught myself how to bend pipe with your videos. One question for compound 90s I have though is for parallel compound 90s would it be the same half tangent formula?
Thanks for commenting and watching. I think you got it confused a little. To get mark A you divide by 1.4 doesn't matter what formula you're using it for. It was just a coincidence that the rect. Obstruction multiplier was 1.4 as well. So to answer your question if you have a square obstruction you multiply by 3 and divide the answer (spacing btwn bend marks A & B) by 1.4 and subtract that amswer by the total distance to find A location. Hope this helps. Im on all major podcasts now i will be uploading all my content slowly and im putting together some special content for the podcast listeners only. Podacast links anchor.fm/holmz-law open.spotify.com/show/2dN4JzjDrCWu1RDaaZZHqc
@@MiguelCastillo-yw3tj thats what im talking about. For square multiply the square dimensions by 3 then divide the answer by 1.4. To get mark A. I will do a video.
Ok so i guess im misunderstood you. Sorry about that. Hope your clear on everything. If not then when i do the video you could have all your questions answered there.
Sure no problem. Enough people ask for the square video ill do it. There's nothing odd about it. Its only a square object positioned a certain way. That's it.
@@juliovalencia4948 ill have to try that. Im more of a calculated type of person but ill try get and make a video on it if its really close to what its suppose to be and it works. If you dont mind that is. Thanks
Gracias por cuidar a mi amigo. Cuéntales a tus amigos y compañeros de trabajo sobre el canal. También puse los subtítulos en español, así que mira el video. No sé si tienes que esperar un poco antes de que continúe. Pero lo hice. También sígueme en: Instagram @ Holmzlaw Facebook @ Holmzlaw Tiktok @ Holmzlaw También estoy en podcast ahora: Spotify: open.spotify.com/show/2dN4JzjDrCWu1RDaaZZHqc Anchor: anchor.fm/holmz-law Google Podcast: www.google.com/podcasts?feed=aHR0cHM6Ly9hbmNob3IuZm0vcy8zZjBjZTkwYy9wb2RjYXN0L3Jzcw==
You told me to multiply 1.4 and then divide 1.4 right after 😑. My guy I think you confused yourself 😂. Keep it simple bud and stop trying to sound too smart. Stay in your lane buddy
@chile7671 that is what I said and what you are supposed. This is my lane brother. Have you even tried the formula? I've been doing the same bend for over 20+ years. I apologize if it's confusing to you.
I’ve been an electrician for 25 years. One of the best conduit bending videos I’ve seen. Thanks brother keep up the good work.
Seriously! Im an electrician for about same as you maybe a little longer. I appreciate the comment brother. 🙏🙏🙏.
I just want to say, your diagram that you drew up @ 20:20 is so damn helpful. I wish there were more visual representations of bends like this one & others, in the material i am shown in school. These videos have been a lot more helpful.
You are a gem for the community my man. an electrician's electrician if there ever was one. lol.
I appreciate the comment my brother. Most of all thanks for watching.
Great video. Thank you for this information and video. It is gold!
Glad you think so. Im on podcast now too. Go have a listen
Anchor.fm/holmz-law let your friends and co- workers know. Thanks
Very, very helpful. Thank you for putting in the time to explain this and film it. You got me past my first corner obstruction today. Much appreciated.
Thank you for watching. I have the video on the calculation for the other obstructions like round and square as well. Along with a full library of video's for different bends and tips and tricks as well.
@@TheArtOfConduitBending oh yeah! I’m subbed and I plan to go through your library to get some knowledge. I really like how you explain things.
@@BryanMullins wow thanks. I appreciate the comment.
Hey man you are a life saver! I’m no pro but I was making a 100 ft run of 3/4 Emt in my shop and I was really struggling with one corner until I found this video. Thank you!
Wow thanks. Glad I could help.
Thank you, very well taught. I’ll try it out at work tomorrow!
Yes, please, a square formula one would help a lot, thanks for the videos, helps a lot
Yes I have all three types of obstructions for a compound 90 video. Square, round and rectangle. I will send you the link to the Square formula video. Thanks for watching my videos and most of all for commenting. I really appreciate it.
Please follow me on:
Facebook/holmzlaw
Instagram/holmzlaw
TikTok/holmzlaw
Reddit/holmzlaw
LinkedIn/melvinrubio
Snapchat/holmzlaw
Tradehounds/holmzlaw
Discord- discord.gg/cKgE88wW
Communities:
Reddit/r/conduitology
Facebook/artofconduitbending
LinkedIn/artofconduitbending
ahhh man bending on the finished floor? just breakin balls, good vid
Lol. You're are not the only one that has brought that to my attention 🤣
An idea for a video maybe. You’re favorite tools for bending. Like why you use a folding rule. Or your favorite reamer. And maybe another video about some beginner tips for do and don’t with bending conduit like always use a pencil.
Awesome videos can you do one laying out a panel for conduits thanks
I got you. I have a few of videos to do before i do your video but i got you.
Thanks bro! Highly appreciate it
do you have a class i can sign in and learn by you? your a awesome teacher thank you for your channel!
At the moment I have too many. When someone stops rescheduling I'll get you in. I only have so many hours in a day. You can start by joining my Discord server here don't forget to go to the main room "conduitology 101" and introduce yourself.
discord.gg/MBqDWWzH
Thanks man I've taught myself how to bend pipe with your videos. One question for compound 90s I have though is for parallel compound 90s would it be the same half tangent formula?
so in simpler terms correct me if im wrong mark "a" = x+y-z . mark "b" = 1.4(x+y) distance away from mark "a"
Yes in simpler terms that is definitely correct. Very good my brother. I think ill have to re do the video when the time comes. Thank you.
You should do the compound square obstruction video. If your multiplier is 3 for the square formula do you have to divide by 3 also to get your A mark
Thanks for commenting and watching. I think you got it confused a little. To get mark A you divide by 1.4 doesn't matter what formula you're using it for. It was just a coincidence that the rect. Obstruction multiplier was 1.4 as well. So to answer your question if you have a square obstruction you multiply by 3 and divide the answer (spacing btwn bend marks A & B) by 1.4 and subtract that amswer by the total distance to find A location. Hope this helps. Im on all major podcasts now i will be uploading all my content slowly and im putting together some special content for the podcast listeners only. Podacast links
anchor.fm/holmz-law
open.spotify.com/show/2dN4JzjDrCWu1RDaaZZHqc
@@TheArtOfConduitBending thanks men what I meant was for the square obstruction formula.
@@MiguelCastillo-yw3tj thats what im talking about. For square multiply the square dimensions by 3 then divide the answer by 1.4. To get mark A. I will do a video.
Ok so i guess im misunderstood you. Sorry about that. Hope your clear on everything. If not then when i do the video you could have all your questions answered there.
The square obstruction you mention is odd. I'd like to see you perform the bends and formula. I like all your videos.
Sure no problem. Enough people ask for the square video ill do it. There's nothing odd about it. Its only a square object positioned a certain way. That's it.
Use your tape measure bend it at a 45 thats your distance between bends
@@juliovalencia4948 ill have to try that. Im more of a calculated type of person but ill try get and make a video on it if its really close to what its suppose to be and it works. If you dont mind that is. Thanks
@@TheArtOfConduitBending dont mind at all
Ponle subtítulos por favor para los que vemos tus vídeos y somos latinos no entendemos
Im working on it
Gracias por cuidar a mi amigo. Cuéntales a tus amigos y compañeros de trabajo sobre el canal. También puse los subtítulos en español, así que mira el video. No sé si tienes que esperar un poco antes de que continúe. Pero lo hice. También sígueme en:
Instagram @ Holmzlaw
Facebook @ Holmzlaw
Tiktok @ Holmzlaw
También estoy en podcast ahora:
Spotify:
open.spotify.com/show/2dN4JzjDrCWu1RDaaZZHqc
Anchor:
anchor.fm/holmz-law
Google Podcast:
www.google.com/podcasts?feed=aHR0cHM6Ly9hbmNob3IuZm0vcy8zZjBjZTkwYy9wb2RjYXN0L3Jzcw==
Si hermano buena recomendación.
#todoinventostv
You told me to multiply 1.4 and then divide 1.4 right after 😑. My guy I think you confused yourself 😂. Keep it simple bud and stop trying to sound too smart. Stay in your lane buddy
@chile7671 that is what I said and what you are supposed. This is my lane brother. Have you even tried the formula? I've been doing the same bend for over 20+ years. I apologize if it's confusing to you.
@chile7671 read the comments you're the only idiot that didn't follow thru. Lmao. You made yourself look like a fool.