Thanx for inspiring me to do the following: the momentary switch is my rescue mode, but i really wanted a momentary switch to reset my timer also. Made a logical switch with the edge function where the momentary switch and throttle cut have to be met, in order to reset the timer. Great!
Interesting. For setting and resetting timers, I found your tutorial on creating additional temporary switches using T5 and T6 more practical because then you don't have to remember how long to hold the temporary switch.
Your videos are very good, and I'm thinking of applying some of your options, these radios are really incredible, the number of possibilities they allow you. As always, excuse me for not expressing myself well and using a translator.
I'd be happy to do one if I knew the first thing about RC helicopters. I've never flown anything other than little toy helo's and quads. So I'm afraid I wouldn’t be very useful on that subject. Appreciate the kind words though...
Very nice work with the tutorials, you do a great job thoroughly explaining and simulating the chosen topic. I use my momentary switch to announce the lowest cell voltage when pulled and pack voltage when released for my planes that have voltage sensors. I haven't used instant trim yet but if I do it will get added to the momentary switch 😊
Really glad you showed up in my search results. Your manner of teaching is excellent and I am working through your play list. Is there a list of all the commands in Open Tx, e.g you used EDGE , I had never even seen that , let alone had it defined. Many thanks
First, Welcome to the channel. You'll want to make sure you have Companion downloaded and use that because the tutorials will utilize Companion for configuration demos going forward. You can always look at the functions available under the Logical Switch tab and the function drop down list. They're all listed. Very easy to do in Companion.
Great video, another piece of art from the master. Extremly useful for my e-powered gliders, i use this setting for the total flight time instead of timer one whitch still is triggered by the throttle..thanks al lot
Very good feature, I'm glad you showed it. My question is: can I also set it to beep in every second when I holding the switch so I don’t have to count the seconds myself?
@@RCVideoReviews hoping to figure out through trial and era at the moment with doing mixing off of the gear 2 position switch for mixing in gear doors and other delayed scale effects. Open tx seems to be the way forward once we all learn its power
@@RCVideoReviews thanks my man, the model I'm hoping to build uses the main gear door as the speed brake. Then there is spoilers on the wing to assist tailerons, and each turn off as wing sweeps back. Eg F111C similar in function as F14
That's all you got? Is that ALL the game you got? Dang man... I'll do the first one for you. You can use that to figure out the second one. Video coming up!
![OpenTx Companion Tutorial • Tuner Setup: Easy RC Plane Maidens! • Radiomaster TX16s • [Intermediate]](http://i.ytimg.com/vi/KNXBwHwdFWU/mqdefault.jpg)
![OpenTx Companion Tutorial • Tuner Setup: Easy RC Plane Maidens! • Radiomaster TX16s • [Intermediate]](/img/tr.png)
![OpenTx Companion Tutorial • How-to Use Logical Switches • Every Function Explained • [Beginners]](http://i.ytimg.com/vi/u-EOmqWQmvs/mqdefault.jpg)
![OpenTx Companion Tutorial • Best Throttle Cutoff Using Logical Switches • TX16s [Intermediate]](/img/n.gif)
Thanx for inspiring me to do the following: the momentary switch is my rescue mode, but i really wanted a momentary switch to reset my timer also. Made a logical switch with the edge function where the momentary switch and throttle cut have to be met, in order to reset the timer. Great!
Sounds good! Glad you were able to take advantage of the concepts to get your radio doing what you need.
Interesting. For setting and resetting timers, I found your tutorial on creating additional temporary switches using T5 and T6 more practical because then you don't have to remember how long to hold the temporary switch.
Yeah I hear you. This is just another way to use the radio capabilities.
Thanks for much for the clear instructions... well done!
You are welcome!
Your videos are very good, and I'm thinking of applying some of your options, these radios are really incredible, the number of possibilities they allow you.
As always, excuse me for not expressing myself well and using a translator.
Thank you. I appreciate your comments. And I agree, these radios have amazing capabilities.
“Oh yah, that was a good video.”😀 Very well explained. Thanks.
Thanks for checking-in George. Glad you liked it.
the bloopers are great I'm always looking forward to them at the end of a video lol
Glad you found them ;)
I just love your videos, they are so informative.
Any chance of a "how to setup a helicopter" clip ?
Keep up the great work.
I'd be happy to do one if I knew the first thing about RC helicopters. I've never flown anything other than little toy helo's and quads. So I'm afraid I wouldn’t be very useful on that subject.
Appreciate the kind words though...
Very nice work with the tutorials, you do a great job thoroughly explaining and simulating the chosen topic. I use my momentary switch to announce the lowest cell voltage when pulled and pack voltage when released for my planes that have voltage sensors. I haven't used instant trim yet but if I do it will get added to the momentary switch 😊
Yup, that’s a great example of how flexible this software can be. Thanks for sharing your setup and thanks for the comment.
J
Really glad you showed up in my search results. Your manner of teaching is excellent and I am working through your play list.
Is there a list of all the commands in Open Tx, e.g you used EDGE , I had never even seen that , let alone had it defined.
Many thanks
First, Welcome to the channel.
You'll want to make sure you have Companion downloaded and use that because the tutorials will utilize Companion for configuration demos going forward. You can always look at the functions available under the Logical Switch tab and the function drop down list. They're all listed. Very easy to do in Companion.
Great video, another piece of art from the master. Extremly useful for my e-powered gliders, i use this setting for the total flight time instead of timer one whitch still is triggered by the throttle..thanks al lot
You're very welcome. I'm happy these videos are helpful for you. Thanks for the kind comment.
Finally the difference between sticky and edge is now clear in my head (just a couple of neurons left, but they do the job). 😂😂😂✌️
Save some room to remember the edge switch conditions :) I still have to look those up sometimes.
Yes amazing to learn new things that
OpenTx Can do
Well done continue so I enjoy all your guidance
Thanks
Thanks, will do!
Very good feature, I'm glad you showed it. My question is: can I also set it to beep in every second when I holding the switch so I don’t have to count the seconds myself?
Awesome features and clearly explained. Thanks
You're welcome!
Wow! What a powerful little black plastic box I bought
And these are beginner tutorials....
Yet another great tutorial, Thank You!
You’re welcome!
Thanks buddy, keep up this great work, its helping a huge amount
Thanks Russ. Appreciate the comment.
@@RCVideoReviews hoping to figure out through trial and era at the moment with doing mixing off of the gear 2 position switch for mixing in gear doors and other delayed scale effects. Open tx seems to be the way forward once we all learn its power
Get into companion and play with it. There are delay functions in several places. You can also chain logical switches together.
@@RCVideoReviews thanks my man, the model I'm hoping to build uses the main gear door as the speed brake. Then there is spoilers on the wing to assist tailerons, and each turn off as wing sweeps back. Eg F111C similar in function as F14
Very nice.👍👍👍👍
Thank you! Cheers!
Hi, do you have a video on how to use the Momentary Switch (SH) to Arm Your Model with Open TX edge on a tx16 Mk2 with edge 2.6, thanks in advance
Ok John how about making my sliders say "pan right-pan left" or gain knob say " gain up"?
That's all you got? Is that ALL the game you got?
Dang man...
I'll do the first one for you. You can use that to figure out the second one. Video coming up!
Alright brother, your question has been answered: ua-cam.com/video/wpy_ZOw6Gto/v-deo.html
Let me know if that does it for ya.
Nice sharing.. help me how to use trainer mode with anather Tx like a flysky i6 or futaba Tx.. thanks B4
Any protocol in the multi-module that supports RX mode should work the same exact way. DSM is known to work.
@@RCVideoReviews i means use wire buddy trainer.. 🙏
i have no sf or sh in my list,what can i do?
👍👍👍
Thanks for watching ;)
Get out of my head! After watching your other vid about assigning instant trim I missed my timer reset.
Hahah! Great minds think alike.
👍👀🇭🇷
Thanks for watching and leaving the remark :)