For all the young bucks who never used a calk gun before Take nozzle off tube of calk use a razor blade and cut the tip of the tube off screw cap back on now your good to go (don’t try to poke through the nozzle or you’ll make it bigger and possibly make mess when due to too much coming out at once especially if you working on these types of expensive wheels 👍🏾
This video was extremely well done, as somebody that never subscribes to anything on UA-cam I’m pleased to say that I subscribed and look forward to more content and inspiration as I build my Model S. Cheers
Hey Christian, thanks for this video bro! I just went wide and needed to resize my meisters as well. This definitely makes me more comfortable with doing the rebuild myself and not having to ship off my wheels.
dont know if this has been said already but a good suggestion would to use masking tape for your rachet extensions, it would save your worries of scratching your lips. None the less great vid mate! love the illiminate gang
Great video, thought you and kaz would have polished the hardware and face before putting it back on. To make them look even more beautiful, good shit guys!
I wouldnt use tape. Just use the silicon and feather it out to be a nice clean tight seal. I've done it before on my 100 spoke wheels and it leaves a nice clean seal no leak.. If you ever get a chance to look at an wire rim video it will help out.. Just my input.. But came out nice. Gave you a big 👍 up homie
Dope af thanks for this video. Explanation on point I get every step you said. Will be doing this soon if you guys get an update on how it went. Thanks again for the awesome video.
I searched to try and find how i can make my bazreia 18x9.5 have a 5 inch lip but this didnt help. No hate! I did learn how to rebuild them :) I'll be doing this my own as well and y'all helped a lot
Good and very informative video. I am doing a face swap on my meisters as we speak. I am going from a 5x112 to a 5x114.3. Although it's not a full rebuild, this video helps alot. Thank you for that. Just one question. Is it recommended to put some kind of lock tite on the bolts attaching the face and the barrels?
SinDrifts the offset becomes higher because the center of the wheel width scoots towards the barrel as you widen it. Idk if you can visualize that. Haha but try
Hey, I Got some rims from Japan and the assembly bolts on the inside is a bit rusty and has corrosion. I was wondering if I can just unscrew them out and put it in evapo-rust and just reinstall them after. That’s fine right? No need to rebead?
I like the rims and all, but there is just no way I would ever drop over $700 a rim unless I was doing some real racing on them. I mean if I was driving around town on a set of rims that are almost 3K every little bump would just freak me out lol.. Especially if I was stanced with camber lol.. Luckily you guys got some awesome perks of having great channels with great content!
These are hella helpful. Love the Subi boys Kaz and Christian. Can't wait for more vids and Kaz to get his parts for more content. Quality over quantity💯. Keep it up guys
One of the most underrated UA-camr Christian keep up the great content
Appreciate that brotha!
For all the young bucks who never used a calk gun before
Take nozzle off tube of calk use a razor blade and cut the tip of the tube off screw cap back on now your good to go (don’t try to poke through the nozzle or you’ll make it bigger and possibly make mess when due to too much coming out at once especially if you working on these types of expensive wheels
👍🏾
We all need friends like Christian and Kaz
❤️
Kaz filming skills are so flawless. With the music and angle of the Cinematics is almost like watching a artist painting.
Couldn't have made this video without him haha
Sun Kevin Dustin n Christian uploaded today. Man what an awesome Sunday. 🙏
Great video guys. Makes me wish I had more car friends around.
Finally! A very detailed video on working on a 3 piece wheel. Just bought work wheels and this helps me understand what I need to do !!
You did a great job telling everyone how’s its done ✅
Easily my favourite car video I’ve watched all month
Always nice seeing a home built project for cars. Very nice job to you and Kaz! Just watching the process I enjoyed👍
The time and dedication for this build is awesome I love the commitment! Keep up the good work Christian. 🤘🏼
Y’all are real homies. Damn loyalty at its finest. Good rebuild fam
That's a lot of nuts my dude. So much work for the rims. 🙏
I now understand why they’re called ‘3 piece’ wheels thanks to this video.. keep up the good content!
Forgot to mention guys. You should use loctite on the hardware.
Blue Loctite
Love the how to vids. didnt know much about 3 piece wheels before but now i ngo, Keep it up man!
Christian x Kaz collab = 🔥🔥🔥🔥🔥🔥
Highly recommend cleaning all the hardware/faces before re-assembly
by far one of my fav videos
Me too man!
Absolutely love these type of videos! I learn something new every time.
def explained it alot better than most videos
Love the videos bro love the background sound 💯💯
Thank you!
This is your quality of content right now. Now imagine when you hit 1 million? Ohh God😭😭😭😭
Such a clean video bro! Thank you! You inspire me everyday. Christian and Kaz both dopest car enthusiast youtubers !
1am in the UK and ill refuse to sleep till i watch your new vid
SSR Vienna Kreis faces come out through the front of the wheel 👌🏻
This video was extremely well done, as somebody that never subscribes to anything on UA-cam I’m pleased to say that I subscribed and look forward to more content and inspiration as I build my Model S.
Cheers
Hey Christian, thanks for this video bro! I just went wide and needed to resize my meisters as well. This definitely makes me more comfortable with doing the rebuild myself and not having to ship off my wheels.
You guys are doing it the right way
James Goins thanks bro!
@@christianngo4736 your content is always on point bro
dont know if this has been said already but a good suggestion would to use masking tape for your rachet extensions, it would save your worries of scratching your lips. None the less great vid mate! love the illiminate gang
The results came out amazingly!! Those Meister’s are beautiful! 😍
Kaz needs to vlog more 😭
Great video, thought you and kaz would have polished the hardware and face before putting it back on. To make them look even more beautiful, good shit guys!
I wouldnt use tape. Just use the silicon and feather it out to be a nice clean tight seal. I've done it before on my 100 spoke wheels and it leaves a nice clean seal no leak.. If you ever get a chance to look at an wire rim video it will help out.. Just my input.. But came out nice. Gave you a big 👍 up homie
Cant wait to rebuild my 3 piece wheels. thanks for the informative video. looks super easy!!!
Sick video never knew 3 piece wheels where assembled this way.
Love the intros bro ! Much love from kentucky !
Nice!! Everyone make sure to watch the adds so our boy can get paid $$$
actually done very well. very interesting to watch despite the length of the video. great job overall
I’m not crying you are 😢 good times
Dope af thanks for this video. Explanation on point I get every step you said. Will be doing this soon if you guys get an update on how it went. Thanks again for the awesome video.
Nice bro! Saw them angles from Randy's video LOL. Effort paid off.
I did not know that they were assembled gave me some good ideas
Let me know what you think Christian. This is need for speed Xbox one.
The 180sx ua-cam.com/video/gc7l8WdXYss/v-deo.html
This will be your biggest video yet! Calling it!
Thanks bro! I really hope so!
I searched to try and find how i can make my bazreia 18x9.5 have a 5 inch lip but this didnt help. No hate! I did learn how to rebuild them :) I'll be doing this my own as well and y'all helped a lot
You seem humble and have some informative videos. New Sub!
You guys did a great on the three piece rim!
Bro, Christain needs to start a DIY series or something.
Super dope video got me wanting to pull the trigger on these 3 piece wheels I’ve found! Thanks man
Great content as always man and its cool to see how easy/diy these wheels can be to work on
Subscribing simply for the time and effort put into making this video.
Good work guys
Gotta respect the hard work & time💯💙
Great vid Chris, very informative 👍🏾
Good and very informative video. I am doing a face swap on my meisters as we speak. I am going from a 5x112 to a 5x114.3. Although it's not a full rebuild, this video helps alot. Thank you for that.
Just one question. Is it recommended to put some kind of lock tite on the bolts attaching the face and the barrels?
Great job boiiz! Keep it up Christian! 🔥🔥🔥💯
Hey Christian , sick rims bro awesome job man. And I luv ur WRX DUDE SWEET
Give this man a 100k subs! LETS GO! Cheers man from PH
Quality content and good work! You messed up on the valve stem placement though...
Christian your talented asf bro 💯🌡🔥🔥🔥
Thanks bro ❤️
you guys really have the ability~ GOOD!!
Been wanting to do this for so long, keep it up bro
i enjoyed the vlog today! and yes kaz needs to vlog more
3 finger stroke game strong 😎😎😎
Brandon Sao HAHA
GOOD VID N MUSIC NOW I KNOW A BIT OF THE PROCESS DOPE
Earned yourself another sub brodie! Keep up the rad content my fellow Asian brotha!
Dope 👍... Made it look really easy too homie🔥🔥🔥👌
I’m not sure but I’m assuming that heating the silicone up would help with the removal process as well.
Finally car don’t look like shittt 💕 Christian you should take the wrx badge off tbh
Love the vibe in this one man.
christian your filming skills are on point keep up ;-)
I can say I learned something today !
Thats right my boii!! Clean!! Love it 😌😎🤙🏽👌🏽
Yee yee! This is the type of content I like to see.
Great job ya two
Damn, editing on point homey
Good content makes me wanna get three piece wheels so bad
Banger video fam🤟🏽
Hella Great Content 👍 Good Team Work 💯
Antho Villarreal ❤️
nicely done fellas
I fuck with the Kaz x Christian duo
dont have 3 piece wheels, but love the video man ! Watching in the Netherlands !
maybe put a towel or cloth on the box so you dont scratch? great vid as always bro
By upsizing the barrel aren’t you also lowering offset? I’m thinking of buying my own barrels and lips
SinDrifts the offset becomes higher because the center of the wheel width scoots towards the barrel as you widen it. Idk if you can visualize that. Haha but try
👌👌👌
What type of silicone did you guys use?
Love the videos christian 🔰
awsome job boiiz 💪🏽
Bruh dope video man , keep up the grind man
Appreciate the knowledge 👍always ready to learn 💪
Nice work looks great
Love your videos keep making them
Got to show that respect👌
Some good content. Keep it up 👍🏻
@17:55 “when your crush accidentally brushes against you”
Hey, I Got some rims from Japan and the assembly bolts on the inside is a bit rusty and has corrosion. I was wondering if I can just unscrew them out and put it in evapo-rust and just reinstall them after. That’s fine right? No need to rebead?
Very nice vid bro
I like the rims and all, but there is just no way I would ever drop over $700 a rim unless I was doing some real racing on them. I mean if I was driving around town on a set of rims that are almost 3K every little bump would just freak me out lol.. Especially if I was stanced with camber lol.. Luckily you guys got some awesome perks of having great channels with great content!
Those times when you gotta roll up your sleeves and torque deeznuts.
Quality content af!! 🔥🔥🔥
These are hella helpful. Love the Subi boys Kaz and Christian. Can't wait for more vids and Kaz to get his parts for more content. Quality over quantity💯. Keep it up guys
That’s right turn that wheel on 😂😂with that 3 finger rub19:00